RELV4-16 RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Universal AC Input Range: 90-264VAC
  • Suitable for DALI Installation
  • IEC-62386 Compliant
  • Cooling by free air convection
  • Over Current and Short Circuit Protected RELV4-16 IEC-62386 Compliant EN-55015 Certified EN-61347-1 Certified EN-61347-2-11 Certified

Description

The RELV4-16 is designed to power a DALI digital lighting control bus. This low cost AC/DC power sup- ply is fully compliant with the IEC62386 DALI standard, so can be used with any DALI-certified product or controller. The output is current limited to 200mA, sufficient to power a complete DALI zone with up to 64 addressable DALI devices. The universal input voltage range from 90V to 264VAC enables the RELV4-16 to be used anywhere in the world. Due to its compact design with mounting tabs, it can be easily and conveniently integrated into any DALI network. An indicator LED shows Power OK and DALI bus traffic to aid installation and commissioning. The RELV4-16 comes with a 5 year warranty. Selection Guide Part Input Input Current Output Output Output Efficiency Number Voltage Range (@ 115VAC) Voltage Current Power typ. (VAC) (mA) (VDC) (mA) (W) (%) RELV4-16 90-264 110 16 200 3.2 68

5 YEAR

Parameter Condition Min. Typ. Max. Input Voltage Range 90VAC 264VAC Output Voltage Range full load 16VDC DC Voltage Range 13.6VDC 18.4VDC Inrush Current 115VAC 230VAC 21A 42A DC Output Current Range 13.6VDC 18.4VDC 240mA 180mA Start-up Time 115VAC 230VAC < 1s < 0.5s Rise and Fall Times compliant with IEC62386-101 1st Edition 10µs <100µs Input Frequency Range 50Hz 60Hz Efficiency see Selection Guide Ripple and Noise (1) 150mVp-p Specifications (measured at TA= 25°C and 230VAC) REGULATIONS Parameter Condition Value Output Voltage Accuracy (2) ±15% typ. Current Tolerance +20% / -10% typ. Notes: Note1: Ripple and Noise is measured @20MHz BW by using a 12“ twisted pair-wire terminated with 0.1µF & 47µF parallel capacitor. Notes: Note2: Voltage Tolerance includes line regulation, load regulation and set-up tolerance.

L-2 REV.: 0/2015 www.recom-international.com Specifications (measured at TA= 25°C and 230VAC) RELV4-16 Series ENVIRONMENTAL Parameter Condition Value Operating Temperature Range -20°C to +45°C Maximum Case Temperature +65°C Storage Temperature Range -40° to +80°C Storage Humidity 10% - 90% RH Operating Humidity non condensing 20% to 90% RH Vibration 10-500Hz, 2G, 60Min. along X, Y and Z MTBF MIL-HDBK-217F, at 25°C 200 x 10³ hours SAFETY AND CERTIFICATIONS Certificate Type Report / File Number Standard CE General Safety EN-61347-1 CE Safety of AC supplied Controlgear EN-61347-2-11 Certificate Type (Environmental) Conditions Standard / Criterion Electric Lighting, EMC Emissions EN-55015 FCC, Part 15 Electric Lighting, EMC Immunity EN-61000-4-2, 3, 4, 5 , 6, 8, 11 Limits for Harmonic Emissions EMC Compatability: Flicker and Voltage Variations EN-61000-3-2, Class C EN-61000-3-3 IP Rating IP20 PROTECTION Parameter Condition Value Short Circuit Protection (SCP) with terminal switch (80°C typ.) Limiting Current Mode Output Over Current Protection (OCP) 240mA max. Limiting Current Mode Isolation Voltage 3.75kVAC / 1 Minute Isolation Resistance 500VDC at 25°C 100MW Isolation Grade compliant with IEC62386-101 Double Isolated for SELV Output -20 605045403020100-10 100 Ambient Temperature (°C) Output Power (%) Derating Graph

Specifications (measured at TA= 25°C, nominal input voltage, full load and after warm-up) AC/DC Converter L-3REV.: 0/2015www.recom-international.com The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. RELV4-16 Series DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Case Material plastic Dimensions (LxWxH) 112 x 42 x 24mm Package Weight 80g PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) Cardboard Box 256 x 124 x 84mm Packaging Quantity 10pcs AC N AC L 42.0 FC 30.0 FC 100.0 24.0 112.0 17.0 57.0 tc LED DA+ DA - Mechanical Dimensions (mm) Tolerance: ±0.5mm FC: fixing center

2 Mounting screws are included

tc= Case Temperature Measuring Point