REDIM RECOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- suitable for energy-saving lamps, dimmable LED lamps / drivers and low voltage halogen lamps with magnetic transformers
- with pressure two-way switch and thermal link
- Over Temperature Protected REDIM
Description
The REDIM series offer dimmers that reliably operate with base loads from 7W. These dimmers and the RACT20 series LED drivers are ideally matched and provide a smooth dimming curve and deep dimming down to zero. The basic light level can be adjusted individually and easily for a customized lighting solution. The warranty is 5 years. Selection Guide Part Input Output Number Voltage Range Power [VAC] [W/VA] REDIM07 198-264 7-110 REDIM20 198-264 20-250
5 YEAR
Specifications (measured at TA= 25°C, nominal input voltage, rated load) PROTECTION Parameter Type Value Over Temperature Protection (OTP) 115°C, thermal shutdown Input Fuse (1) REDIM07 REDIM20 1A, slow blow 2A, slow blow ENVIRONMENTAL Parameter Condition Value Operating Temperature Range max. Case Temperature Range with derating -20°C to +80C, Ambient 80°C max. Derating Graph -20 10080604020 100 Ambient Temperature [°C] Output Power [%] Notes: Note1: Each dimmer contains a spare fuse inside the black protective cover. SAFETY AND CERTIFICATIONS Certificate Type (compliant) Standard Switches for household and similar fixed-electrical installations - General requirements EN-60669-1:2008 Switches for household and similar fixed electrical installations - Particular requirements EN-60669-2-1:2010 EN60669-1 compliant EN60669-2-1 compliant
L-2 REV.: 1/2016 www.recom-power.com Specifications (measured at TA= 25°C, nominal input voltage, rated load) REDIM Series DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Case Material Plastic Package Dimension (LxWxH) 71.0 x 71.0 x 35mm Package Weight 70g Connection Input Output Screw Terinal (1.5-2.5mm²) Screw Terinal (1.5-2.5mm²) Dimension Drawing (mm) cable input 4.0 Adapter to Ø6mm cut 1.0 53.5 Ø3.0 13.2 27.20 R,L Fuse T1AH/250V REDIM07 230V~ 50Hz 7-110 W/VA Minimum Brightness Phase Angler Dimmer (LE) 71.0 TOP VIEW 60.00 71.0 35.5 22.0013.0 30.00 35.5 23.50 3.5 max. cable input 49.20 53.5 BOTTOM VIEW Tolerance: ±0.5mm
Specifications (measured at TA= 25°C, nominal input voltage, rated load) AC/DC Converter REDIM Series INSTALLATION PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) Cardboard Box 73 x 73 x 53mm Packaging Quantity 1 pcs The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. L-3REV.: 1/2016www.recom-power.com L N L N RACT20 Phase angle dimmed LED driver REDIM07 - max. 5x RACT20 REDIM20 - max. 12x RACT20 Notes: Note2: To set the basic brightness, set the actuating button to the left stop minimum brightness). Now use a screw driver to set the desired basic brightness on the potentiometer. Persuant to EN60699-2-1 the basic value should be set in such a way that the light visibly glows over the entire load range (at nominal voltage -10%) when it’s set to dark position. Note3: Dimmer designed for RACT20.