RDC143ZS6R CYSTEKEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit).
  • The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects.
  • Only the on/off conditions need to be set for operation, making device design easy.
  • Two DTC143Z chips in a SOT-363 package.
  • Mounting by SOT-323 automatic mounting machines is possible.
  • Mounting cost and area can be cut in half.
  • Transistor elements are independent, eliminating interference.
  • Complements the HBA143ZS6R.
  • Pb-free package. Equivalent Circuit Outline SOT-363R RDC143ZS6R RB1=4.7kΩ , RB2=4.7 kΩ RBE1=47kΩ , RBE2=47 kΩ TR1 TR2 RB1 RBE2 RBE1 RB2

CYStech Electronics Corp. Spec. No. : C371S6R Issued Date : 2003.09.05 Revised Date :2011.02.22 Page No. : 2/6 RDC143ZS6R CYStek Product Specification Absolute Maximum Ratings (Each Transistor, Ta=25℃) Parameter Symbol Limits Unit Supply V oltage VCC 50 V Input V oltage VIN -5~+30 V IO 100 mA Output Current IO(max.) 100 mA Power Dissipation Pd 200 (Note) mW Junction Temperature Tj 150 °C Storage Temperature Tstg -55~+150 °C Note : 150mW per element must not be exceeded. Characteristics (Each Transistor, Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Test Conditions VI(off) - - 0.5 V VCC=5V , IO=100μA Input V oltage VI(on) 1.3 - - V VO=0.3V , IO=5mA Output V oltage VO(on) - 0.1 0.3 V IO/II=5mA/0.25mA Input Current II - - 1.8 mA VI=5V Output Current IO(off) - - 0.5 μA VCC=50V , VI=0V DC Current Gain GI 80 - - - VO=5V , IO=10mA Input Resistance R1 3.29 4.7 6.11 kΩ - Resistance Ratio R2/R1 8 10 12 - - Transition Frequency fT - 250 - MHz VCE=10V , IC=5mA, f=100MHz* * Transition frequency of the device

Ordering Information

Device Package Shipping Marking RDC143ZS6R SOT-363 (Pb-free) 3000 pcs / Tape & Reel 7K

CYStech Electronics Corp. Spec. No. : C371S6R Issued Date : 2003.09.05 Revised Date :2011.02.22 Page No. : 3/6 RDC143ZS6R CYStek Product Specification Characteristic Curves Current Gain vs Output Current 0.1 100 1000 0.1 1 10 100 Output Current---I O(mA) Current Gain---G I Vo = 5V Output Voltage vs Output Current 0.01 0.1 11 0 Output Current---Io(mA) Output Voltage---V O(ON)(V) 100 Io / Ii = 20 Input Voltage vs Output Current(ON characteristics) 0.1 100 0.1 1 10 100 Output Current---Io(mA) Input Voltage---V I(ON)(V) Vo = 0.3V Output Current vs Input Voltage(OFF characteristics) 0.001 0.01 0.1 0 0.5 1 1.5 2 2.5 3 Input Voltage ---VI(OFF)(V) Output Current---Io(mA) Vcc = 5V Power Derating Curves 100 150 200 250 0 50 100 150 200 Ambient Temperature---TA(℃) Power Dissipation---(mW) Dual Single

CYStech Electronics Corp. Spec. No. : C371S6R Issued Date : 2003.09.05 Revised Date :2011.02.22 Page No. : 4/6 RDC143ZS6R CYStek Product Specification Reel Dimension Carrier Tape Dimension

CYStech Electronics Corp. Spec. No. : C371S6R Issued Date : 2003.09.05 Revised Date :2011.02.22 Page No. : 5/6 RDC143ZS6R CYStek Product Specification Recommended wave soldering condition Product Peak Temperature Soldering Time Pb-free devices 260 +0/-5 °C 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Sn-Pb eutectic Assembly Pb-free Assembly Average ramp-up rate (Tsmax to Tp) 3°C/second max. 3°C/second max. Preheat −Temperature Min(TS min) −Temperature Max(TS max) −Time(ts min to ts max) 100°C 150°C 60-120 seconds 150°C 200°C 60-180 seconds Time maintained above: −Temperature (TL) − Time (tL) 183°C 60-150 seconds 217°C 60-150 seconds Peak Temperature(TP) 240 +0/-5 °C 260 +0/-5 °C Time within 5°C of actual peak temperature(tp) 10-30 seconds 20-40 seconds Ramp down rate 6°C/second max. 6°C/second max. Time 25 °C to peak temperature 6 minutes max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface.

CYStech Electronics Corp. Spec. No. : C371S6R Issued Date : 2003.09.05 Revised Date :2011.02.22 Page No. : 6/6 RDC143ZS6R CYStek Product Specification SOT-363 Dimension Marking: Date Code: Year + Month Year : 6→2006, 7→2007,…, etc Month : 1→Jan →Feb, …, 9 → Sep, A→Oct, B →Nov, C→Dec D 2.000 2.200 0.079 0.087 θ 0° 8° 0° 8° E 1.150 1.350 0.045 0.053 Notes : 1.Controlling dimension : millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material :

  • Lead : Pure tin plated.
  • Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0. Important Notice:
  • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek.
  • CYStek reserves the right to make changes to its products without notice.
  • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
  • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. 6-Lead SOT-363R Plastic Surface Mounted Package CYStek Package Code: S6R Style: Pin 1. Emitter1 (E1) Pin 2. Base1 (B1) Pin 3. Collector2 (C2) Pin 4. Emitter2 (E2) Pin 5. Base2 (B2) ctor1 (C1) Pin 6. Colle Device Code