DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Input Voltage (absolute maximum) 40VDC max Recommended Input Voltage 6V min. / 24V typ. / 36VDC max Input Filter Suffix /A Capacitor Suffix /B Class B with Pi Filter RCD-24-1.00/PL/A Class A with Pi Filter Output Current Accuracy (Vin=24V) 300-700mA ±2% typ, ±3% max 1000mA ±3% typ, ±5% max Internal Power Dissipation Worst case load of 5 LEDs (300-700mA) 700mW max. Worst case load of 8 LEDs (1000mA), Vin=36V 1.6W typ. Output Current Stability Vin = 36V, Vout = 1-9 LEDs (300-700mA) ±1% max Vin = 36V, Vout = 1-8 LEDs (1000mA) ± 1.5% max. Output Ripple and Noise (20MHz BW) Vin=36V, Vout =1-9 LEDs (300-700mA) Vin=36V, Vout =1-8 LEDs (1000mA) 300mVp-p max Temperature Coefficient -40°C to +85°C ambient ±0.015%/°C max Maximum Capacitive Load 100μF Operating Frequency 300-1000mA 212kHz min/ 250kHz typ/ 280kHz max Efficiency at Full Load 300-700mA 96% typ. Vin=36V, Vout=8 LEDs (1000mA) 94% typ. Short Circuit Protection Regulated at rated output current Operating Temperature Range 300/350mA -40°C to +85°C 500mA -40°C to +80°C 600/700mA -40°C to +75°C 1000mA -40°C to +65°C Storage Temperature Range -55°C to +125°C Relative Humidity 5% to 95% RH, non-condensing continued on next page Specifications (typical at 25°C, nominal input voltage, rated output current unless otherwise specified )

Description

The RCD-24-xxx/PL series is a step-down constant current source designed for driving high power LEDs. The converter uses a pinless SMD open frame design to reduce cost and size. Output currents available are 300mA, 350mA, 500mA, 600mA, 700mA and 1000mA with either Class A (Suffix /A) or Class B (suffix /B) built-in EMC filtering. Despite its compact size, the RCD-PL series is fully featured with very high efficiency, wide input voltage range, high ambient operating temperature and two means of LED dimming: PWM/digital control and analogue voltage dimming. Both dimming controls are independent and can be combined. The driver is also designed to be as reliable as the LEDs it is driving, even at the full ambient operating temperature and is designed for strip lighting, wall washers and flourescent tube replacement designs, where a low profile and narrow width are demanded. Part Input Output Output Dimming Mounting Number Range Current Voltage Control Style (VDC) (mA) (Vmin-Vmax) RCD-24-0.30/PL* 4.5-36V 0-300 2-35 Digital + Analogue Pinless SMD RCD-24-0.35/PL* 4.5-36V 0-350 2-35 Digital + Analogue Pinless SMD RCD-24-0.50/PL* 4.5-36V 0-500 2-35 Digital + Analogue Pinless SMD RCD-24-0.60/PL* 4.5-36V 0-600 2-35 Digital + Analogue Pinless SMD RCD-24-0.70/PL* 4.5-36V 0-700 2-35 Digital + Analogue Pinless SMD RCD-24-1.00/PL/A 6-36V 0-1000 2-32 Digital + Analogue Pinless SMD * /A for EMC Class A input Filter add -R for Tape and Reel Packaging e.g. RCD-24-0.35/PL/B-R * /B for EMC Class B input Filter Note: RCD-24-1.00/PL/A only available with Class A Filter /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT67/MT117/MT114/MT114/MT101/MT110/MT116/MT32/MT40/MT109/MT65/MT41 /MT55/MT48/MT48 /MT54/MT48/MT50/MT48/MT52/MT48 /MT49/MT48/MT48/MT51/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT40/MT176/MT67/MT41 /MT48 /MT56/MT48/MT45/MT50/MT48/MT45/MT52/MT48 /MT51/MT53/MT48 /MT54/MT48/MT48 /MT53/MT48/MT48 /MT55/MT53 /MT56/MT48 /MT56/MT53 /MT49/MT48/MT48/MT48 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 /MT54/MT53 Constant Current LED Driver EN-50121-3-2 Certified EN-60950-1 Certified UL-60950-1 Certified RoHS 2011/65/EU E358085 Refer to Application Notes Derating-Graph (Ambient T emperature) www.recom-power.com L-9REV: 1/2016

Specifications (typical at 25°C, nominal input voltage, rated output current unless otherwise specified ) Dimensions 31.0 x 11.4 x 6.6mm Weight 1.9g Packing Quantity 12 pcs per Tube / 400 pcs per Reel Reflow Soldering Profile 265°C/10 sec max MTBF (using MIL HDBK 217F) +25°C >600 khours PWM Dimming and ON/OFF Control (Leave open if not used) Remote ON/OFF DC/DC ON Open or 0V<Vr<0.6V Threshold Voltages DC/DC OFF (Standby) 0.6<Vr<2.9V DC/DC OFF (Full Shutdown) 2.9V<Vr<6V Remote Pin Drive Current Vr=5V 1mA max Quiescent Input Current in Shutdown Mode Vin=36V 200μA max Recommended PWM Frequency For Linear Operation 200Hz (measured 10%~90% Dimming) Maximum Frequency 1000Hz Analogue Dimming Control (leave open if not used) Input Voltage Range 300-1000mA -0.3V - 15V Control Voltage Range Limits (see Graph) 300-1000mA / Full On 0.13V ± 50mV 300-700mA / Full Off 4.2V ± 150mV 1000mA / Full Off 4.35V ±100mV Analogue Pin Drive Current 300-1000mA / Vc=5V 0.2mA max. Environmental Shock / Vibration EN61373 EMC Railways EN50121-3-2:2006 Conducted Emissions 300-1000mA (/A Suffix) EN55022, Class A 300-700mA (/B Suffix) EN55022, Class B Radiated Emissions EN55022, Class B ESD EN61000-4-2, Criterion A Radiated Immunity EN61000-4-3, Criterion A Fast Transient EN61000-4-4, Criterion A Conducted Immunity EN61000-4-6, Criterion A Typical Characteristics /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT40/MT37/MT41 /MT49/MT48/MT48 /MT50/MT48/MT49/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT86/MT111/MT108/MT116/MT97/MT103/MT101/MT32/MT40/MT86/MT41 /MT53/MT48 /MT51/MT48/MT48 Vin = 24V, Iout = 300~1000mA /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT40/MT37/MT41 /MT49/MT48/MT48 /MT50/MT48/MT49/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT86/MT111/MT108/MT116/MT97/MT103/MT101/MT32/MT40/MT86/MT41 /MT53/MT48 /MT51/MT48/MT48 Vin = 32V, Iout = 300~1000mA Note: 1. All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. 2. It is not possible to parallel the drivers to increase the current. L-10 www.recom-power.comREV: 1/2016

/MT49 /MT48 /MT80/MT87/MT77/MT32/MT68/MT105/MT103/MT105/MT116/MT97/MT108/MT32/MT67/MT111/MT110/MT116/MT114/MT111/MT108/MT32/MT83/MT105/MT103/MT110/MT97/MT108 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT67/MT117/MT114/MT114/MT101/MT110/MT116/MT32/MT40/MT76/MT69/MT68/MT32/MT97/MT112/MT112/MT101/MT97/MT114/MT115/MT32/MT100/MT105/MT109/MT41/MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT67/MT117/MT114/MT114/MT101/MT110/MT116/MT32/MT40/MT76/MT69/MT68/MT32/MT97/MT112/MT112/MT101/MT97/MT114/MT115/MT32/MT98/MT114/MT105/MT103/MT104/MT116/MT41 /MT80/MT87/MT77/MT32/MT68/MT105/MT103/MT105/MT116/MT97/MT108/MT32/MT67/MT111/MT110/MT116/MT114/MT111/MT108/MT32/MT83/MT105/MT103/MT110/MT97/MT108 /MT49 /MT48 /MT50/MT48/MT48/MT72/MT122 /MT84/MT121/MT112/MT46 /MT50/MT48/MT48/MT72/MT122 /MT84/MT121/MT112/MT46 LIGHTLINE DC/DC-Converter RCD-24-PL Series Package Style and Pinning Dimming XX.X ± 0.5 mm XX.XX ± 0.25 mm Pad Connections RCD-24-PL Series Pad # Out Comments 1 +Vin DC Supply

2 Analogue Dimming Leave open if not used

3 PWM/ON/OFF Leave open if not used

4 GND Do not connect to -Vout

5 -Vout LED Cathode Connection 6 +Vout LED Anode Connection /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT80/MT67/MT66/MT32/MT76/MT97/MT121/MT111/MT117/MT116/MT32/MT84/MT111/MT112/MT32/MT86/MT105/MT101/MT119 /MT54 /MT53 /MT49 /MT51 /MT50 /MT52 /MT67/MT108/MT97/MT115/MT115/MT32/MT65/MT32/MT86/MT101/MT114/MT115/MT105/MT111/MT110/MT67/MT108/MT97/MT115/MT115/MT32/MT65/MT32/MT40/MT49/MT46/MT48/MT48/MT65/MT45/MT86/MT101/MT114/MT115/MT105/MT111/MT110/MT41 /MT67/MT108/MT97/MT115/MT115/MT32/MT66/MT32/MT86/MT101/MT114/MT115/MT105/MT111/MT110 /MT50/MT46/MT53/MT52 /MT50/MT32/MT120/MT32/MT50/MT46/MT53/MT32/MT83/MT77/MT84/MT32/MT80/MT97/MT100/MT32/MT120/MT32/MT54 /MT54/MT46/MT54 /MT50/MT46/MT53/MT52 /MT50/MT53/MT46/MT52 /MT51/MT49/MT46/MT48/MT48 /MT49/MT49/MT46/MT52/MT55/MT46/MT54 /MT49/MT46/MT57 /MT49/MT109/MT109/MT32/MT104/MT97/MT108/MT102/MT32/MT86/MT105/MT97/MT32/MT120/MT32/MT54 /MT54/MT46/MT54 /MT57/MT46/MT48 /MT86/MT111/MT108/MT116/MT97/MT103/MT101/MT32/MT67/MT111/MT110/MT116/MT114/MT111/MT108/MT32/MT40/MT48/MT45/MT49/MT53/MT86/MT32/MT109/MT97/MT120/MT41 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT67/MT117/MT114/MT114/MT101/MT110/MT116 /MT49/MT48/MT48/MT37 /MT48/MT37 /MT49/MT86 /MT50/MT86 /MT51/MT86 /MT52/MT86 /MT49/MT53/MT86 /MT48/MT46/MT49/MT51/MT86 /MT65/MT110/MT97/MT108/MT111/MT103/MT117/MT101/MT32/MT73/MT110/MT112/MT117/MT116/MT32/MT86/MT111/MT108/MT116/MT97/MT103/MT101 /MT49/MT48/MT86 /MT51/MT48/MT48/MT45/MT55/MT48/MT48/MT109/MT65 /MT52/MT46/MT50/MT86 /MT49/MT48/MT48/MT48/MT109/MT65 /MT52/MT46/MT51/MT53/MT86 www.recom-power.com L-11REV: 1/2016 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. Note: 3. If PWM dimming is used, a capacitor on output in parallel is required. /MT82/MT67/MT68/MT45/MT50/MT52/MT45/MT80/MT76 /MT86/MT105/MT110 /MT71/MT78/MT68 /MT65/MT110/MT97/MT108/MT111/MT103/MT117/MT101 /MT86/MT111/MT117/MT116/MT45 /MT86/MT111/MT117/MT116/MT43 /MT80/MT87/MT77/MT32/MT79/MT78/MT47/MT79/MT70/MT70 /MT67/MT49 P/N C1 RCD-24-0.30/PL/X 33μFRCD-24-0.35/PL/X RCD-24-0.50/PL/X RCD-24-0.60/PL/X 47μFRCD-24-0.70/PL/X RCD-24-1.00/PL/A 150μF