RC3216J680CS SAMSUNG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
- Supplier : Samsung electro-mechanics • Samsung P/N: RC3216J***CS
- Product : Thick - Film chip RESISTOR • Description : 3216, ±5%, (1Ω~10㏁), 1/4W RC 3216 J *** CS ①② ③ ④ ⑤ ① Code designation Samsung Thick - Film Chip Resistor ② Dimension 3216 (mm code) L : 3.2 ± 0.2 mm W : ± 0.15 mm T : ± 0.1 mm ③ Resistancs tolerance ±5 % ④ Nominal resistance value ※3digits -Left 2 digits : Resistance value, Right 1 digits : Exponential number of 10. ex) 101 : 10×101 = 10×10 = 100Ω ※4digits -Left 3 digits : Resistance value, Right 1 digits : Exponential number of 10. ex) 4222 : 422×102 = 422×100 = 42.2㏀ Read alphabet "R" as decimal point "000" : Jumper(0Ω) ex) 3R7 : 3.7 = 3.7Ω / 88R7 : 88.7 = 88.7Ω ⑤ Packing code 7" Reel packaging B. Samsung Reliablility Test and Judgement condition Resistor Jumper Resistor Jumper Direct Current Within the regulated resistance 50mΩ Max Voltage apply Within 5 sec Resistance tolerance. Short-time Less than ±(1%+0.1Ω)of the initial value 50m Ω Max Apply 2.5 times rated voltage for 5sec Max Surge Overload No evidence of mechanical damage Current Intermittent Less than ±(3%+0.1Ω)of the initial value 50m Ω Max 2.5 times of rated voltage. Max Surge Overload No evidence of mechanical damage 1 sec On, 25 sec Off / 10,000cycles Current Dielectric No evidence of mechanical damage Apply Voltage for 1minute Withstanding Voltage 0603:50v Insulation Over 1,000MΩ 1005,1608:100v Resistance Other: 500v ■ J-Grade Test Temperature(℃) 20℃→-55℃/20℃→125℃ Temperature 1Ω≤R<10Ω:+300/-200ppm/℃ T.C.R(ppm/℃) = Characteristic 10Ω≤R≤1MΩ:±100ppm/℃(0603±250ppm) 1MΩ<R≤10MΩ:±300ppm/℃ ■ F-Grade T0 : 20 ± 2℃, R0 : Resistance at T0 (Ω) 10Ω≤R≤1MΩ:±100ppm/℃(0603±250ppm) T : Test temperature , R : Resistance at T (Ω) Solderability Coverage: 95%≤ each termination. Solder Temp : 245 ℃ Dipping time : 3 sec Judgement Test condition SPECIFICATION A. Samsung Part Number 1.6 0.55 RR RT T − × − × 61 10
Bending test Less than ±(0.5%+0.05Ω)of the initial value 50m Ω Max 3mm of bending shall be applied No evidence of mechanical damage for 5sec. Adhesive strength No mechanical damage or sign of disconnection Test strengh : 5N of termination Test time: Applying pressure for 10seconds Resistance to Less than ±(1%+0.05Ω)of the initial value 50m Ω Max 260±5 ℃ , 10 sec soldering heat No evidence of mechanical damage Anti-Vibration Less than ±(1%+0.05Ω)of the initial value 50m Ω Max Test amplitude : 1.5mm test No evidence of mechanical damage Frequency 10㎐-55㎐-10㎐ / 2hr in x,y,z direction. Temperature Less than ±(1%+0.1Ω)of the initial value 50m Ω Max 100cycles, -55 ℃/30min ↔125℃/30min cycle No evidence of mechanical damage sweep time:5min Load life Less than ±(3%+0.1Ω)of the initial value 50m Ω Max Test voltage: rated voltage / 70±2 ℃ No evidence of mechanical damage 1,000hours(90min:On , 30min:Off) Low Temp. Less than ±(3%+0.1Ω)of the initial value 50m Ω Max Dwell in -55 ℃ chamber without loading Exposure No evidence of mechanical damage for 1,000hours High Temp Less than ±(3%+0.1Ω)of the initial value 50m Ω Max Dwel in 125 ℃ or 155℃ chamber without loading Exposure No evidence of mechanical damage for 1,000hours Moisture Less than ±(3%+0.1Ω)of the initial value 50m Ω Max Test voltage: rated voltage / 40±2 ℃ Resistance No evidence of mechanical damage 1,000hours(90min:On,30min:Off) / 90~95% RH C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the samsung chip RESISTOR catalogue. Judgement Test condition