RC1608F332CS SAMSUNG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
0.30±0.03 0.50±0.05 0.80±0.15 1.25±0.15 1.60±0.15 2.55±0.20 2.50±0.20 3.20±0.20 0.23±0.03 0.35±0.05 0.45±0.10 0.50±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.10±0.05 0.20±0.10 0.30±0.20 0.40±0.20 0.45±0.20 0.45±0.20 0.60±0.20 0.60±0.20 0.15±0.05 0.25±0.10 0.35±0.10 0.35±0.20 0.40±0.20 0.40±0.20 0.60±0.20 0.60±0.20 RC0603 RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 Type 0201 0402 0603 0805 1206 1210 2010 2512 Inch Power(W) 0.60±0.03 1.00±0.05 1.60±0.10 2.00±0.20 3.20±0.20 3.20±0.20 5.00±0.20 6.30±0.20 LWH I 1 I2 Average Weight 0.15ɡ 0.6ɡ 2.1ɡ 4.9ɡ 9.5ɡ 16ɡ 26ɡ 41ɡ ↟The part number system shall be in the following format (UNIT: mm) 2370 RC: Chip Resistor Code Designation R C 1005 F Dimension & Size Code Tolerance F: ±1% 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 series) CS Resistance Value Packaging Code GS: Bulk Packaging CS: Tape Packaging 7" ES: Tape Packaging 10" FS: Tape Packaging 13" AS: Tape Packaging 13" ↟Low tolerance (±1%) ↟Both flow and reflow soldering are applicable. ↟Suitable size and packaging for surface mount assembly. ↟Owing to the reduced lead inductance, the high frequency characteristic is excellent. The product of lead-free terminal is RoHS compliant. PhO(lead oxide) is included in the glass of our product which is prescribed on RoHS appendix as an exception. ↟Circuit for high precision resistance and reliability. ↟For signal control part ↟For tunning circuit. Feature Application ↟Structure ↟Dimensions W Glass or Polymer Coating (Protective Coating) RuO2 type Resistor Alumina Substrate(96%) Special Plating (Ni, Solder) Thick film Elecrtode (Inner Electrode) H L Structure and Dimensions Parts Numbering System
100ppm 250ppm 1ʃ~10Mʃ -55~+125 -55~+155 -55~+125 70 RC0603 RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 Type Power Rating (W) 25(V) 50(V) 150(V) 200(V) Working Voltage (MAX) 50(V) 100(V) 300(V) 400(V) Overload Voltage (MAX) TCR (ppm/) Resistance Range (ʃ) F(1%) E-96, E-24 Rated Ambient Temperature Rated Working Temperature ↟Rated voltage (V) = Rated voltage should be lower than (MAX) working voltage. ²Rated power(W)Normal resistance value (R) - Left 2 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 103 Left 2 digits: 10 Last 1 digit: 3 103 = 10103ʃ = 10000ʃ=10kʃ ↟0603, 1005 type: No marking.↟0603, 1005, 1608 type: No marking. ↟3 digits indication (E-24 series) - Left 3 digits represent significant figures. - Last 1 digit represents exponential number of 10. - Example: 1002 Left 3 digits: 100 Last 1 digit: 2 1002 = 100102ʃ =10000ʃ=10kʃ ↟4 digits indication (E-96 series) Percentage of the rated dissipation(%) 100 Percentage of the rated dissipation(%) Operation area -55 -40 0 40 80 120 Ambient Temperature() Ambient Temperature() 70 125 Operation area <1608, 2012, 3216><1005, 3225, 5025, 6432> -55 -30 0 30 60 90 120 150 70 155 100 Specification The rated power is the maximum continuous loading power at 70ambient temperature. For ambient temperature above 70, the loading power follows the below power derating curve. Power Derating Curve Marking IEC Code System (E-96, E-24) 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 E-96 E-24 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 E-96 E-24 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 E-96 E-24 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 E-96 E-24 Operation Notes Example of Land Pattern Design Recommended Soldering Conditions General Purpose Precision Low Ohms Array Standard Resistance Value Packaging Characteristics Performance Attenuator