Datasheet search site | www.alldatasheet.com

Document overview

  • Manufacturer or author: 楊朝評
  • PDF pages: 10

Technical content

Features

 Top view 1016 package  Viewing Angle = 600  Compatible with infrared and vapor phase reflow solder process  High reliability  Ultra bright Red  RoHS compliance

Applications

 Optical indicator.  Switch and Symbol Display.

Description

The RC101606-ATC4 is an AlGaInP Red LED housed in a miniature SMD package. The device has a dominant wavelength of 620nm LED. Cathode Anode

Proprietary & Confidential Page 2 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter Absolute Maximum Rating at 250C Symbol Parameters Ratings Units Notes IF Continuous Forward Current 30 mA IFP Peak Forward Current 90 mA 1 VR Reverse Voltage 5 V Topr Operating Temperature -40 ~ +85 0C Tstg Storage Temperature -40 ~ +100 0C Tsol Soldering Temperature 260 0C 2 PD Power Dissipation at(or below) 25℃ Free Air Temperature 70 mW Electro-Optical Characteristics TA = 25°C (unless otherwise specified) Optical Characteristics Symbol Parameters Test Conditions Min Typ Max Units Notes Iv Luminous Intensity IF=20mA 450 - 900 mcd 3 λd Dominant Wavelength IF=20mA 617.5 - 629.5 nm 4 θ1/2 Angle of Half Intensity IF=20mA - 60 - deg

Electrical Characteristics

Symbol Parameters Test Conditions Min Typ Max Units Notes VF Forward Voltage IF=20mA 1.75 - 2.35 V IR Reverse Current VR=5V - - 1 µA Notes: 1. IFP Conditions--Pulse Width≦ 100μs and Duty≦ 10%. 2. Soldering time≦ 10 seconds.

Proprietary & Confidential Page 3 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter 3. Bin Range of Luminous Intensity Bin Code Min Max Unit Condition U1 450 565 mcd IF=20mA U2 565 715 V1 715 900 Tolerance of Luminous Intensity 10% 4. Bin Range of Dominant Wavelength Bin Code Min Max Unit Condition R4 617.5 621.5 nm IF=20mA R5 621.5 625.5 R6 625.5 629.5 Tolerance of Dominant Wavelength: 1nm 5. Bin Range of Forward Voltage Bin Code Min Max Unit Condition 0 1.75 1.95 V IF=20mA 1 1.95 2.15 2 2.15 2.35 Tolerance of Forward Voltage: ±0.1V.

Proprietary & Confidential Page 4 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter Typical Characteristic Curves

Proprietary & Confidential Page 5 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter Typical Characteristic Curves

Proprietary & Confidential Page 6 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter Package Dimension All dimensions are in mm, unless otherwise stated Note: Tolerance unless mentioned is ±0.1mm. Recommended Soldering Mask All dimensions are in mm, unless otherwise stated Note: Tolerance unless mentioned is ±0.1mm.

Ordering Information

Part Number Description Quantity RC101606-ATC4 Tape & Reel 4000 pcs

Proprietary & Confidential Page 7 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter Reel Dimension All dimensions are in mm, unless otherwise stated Tape Dimension All dimensions are in mm, unless otherwise stated Note: Tolerance unless mentioned is ±0.1mm.

Proprietary & Confidential Page 8 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter Label Form Specification CPN : Customer Part Number Part no: CTM Production Number Serial no: Production Number Lot no: Lot number Q’ty: Packing Quantity Date Code: Manufacture Date IV : Bin Code of Luminous Intensity WD : Bin Code of Dominant Wavelength VF : Bin Code of Forward Voltage MADE IN CHINA: Production Place Storage Condition 1. Do not open moisture proof bag before the products are ready to use. Shelf life of non-opened bag is 12 months after the bag sealing date. 3. After opening the moisture barrier bag floor life is 168h at 30°C/60%RH. max. Unused LEDs should be resealed into moisture barrier bag. (Refer to J-STD-020 Standard) 4. If the moisture absorbent material has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the J-STD-033 Standard conditions.

Proprietary & Confidential Page 9 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter Reflow Profile Profile Feature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150°C Temperature Max. (Tsmax) 200°C Time (ts) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3°C/second max. Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60 – 150 seconds Peak Body Package Temperature 260°C +0°C / -5°C Time (tP) within 5°C of 260°C 30 seconds Ramp-down Rate (TP to TL) 6°C/second max Time 25°C to Peak Temperature 8 minutes max.

Proprietary & Confidential Page 10 Sep, 2020 RC101606-ATC4 SMD Type Red Emitter DISCLAIMER CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instruction for use provided in the labelling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.