RC01

RC01 PHILIPS | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

1997 Feb 26 1

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31

FEATURES

• Low assembly costs
• High component and equipment reliability
• Excellent performance at high frequency, especially the RC31
• Complete standard SMD family.

APPLICATIONS

• All general purpose applications.

DESCRIPTION

The resistors are constructed on a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste which is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to within tolerance, by laser cutting of this resistive layer. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a lead/tin alloy. QUICK REFERENCE DATA Note 1. Data for RC31 is preliminary. (1) Size code 1206 (3216) 0805 (2012) 0603 (1608) 0402(1005) Resistance range 1 Ω to 10 MΩ 10 Ω to 1 MΩ Resistance tolerance and E-series ±5%, ±2%; E24 series Temperature coefficient: ≤± 200 × 10−6/K 5 Ω≤ R ≤ 10 MΩ≤ ± 200 × 10−6/K Maximum dissipation at Tamb =7 0°C 0.25 W 0.125 W 0.063 W 0.063 W Maximum permissible voltage 200 V (DC or RMS) 150 V (DC or RMS) 50 V (DC or RMS) 50 V (DC or RMS) Climatic category (IEC 68) 55/155/56 55/125/56 Basic specification IEC 115-8 Stability after: load, 1000 hours at T amb = 70°C: ΔR/R max.:±3.0% +0.1Ω 1 Ω≤ R ≤ 1M ΩΔ R/R max.:±1.5% +0.1Ω R>1M ΩΔ R/R max.:±3.0% +0.1Ω climatic tests: ΔR/R max.: ±1.0% +0.1Ω 1 Ω≤ R ≤ 1M ΩΔ R/R max.:±1.5% +0.1Ω R>1M ΩΔ R/R max.:±3.0% +0.1Ω

1997 Feb 26 2

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31

ORDERING INFORMATION

Table 1 Ordering code indicating resistor type and packaging Notes 1. The jumper has a maximum resistance Rmax =5 0m Ω and a rated current IR =2A . 2. The jumper has a maximum resistance Rmax =5 0m Ω and a rated current IR =1A . 3. Embossed carrier tape available on request for types RC01 and RC11. TYPE TOL. (%) CARDBOARD TAPE ON REEL (3) BULK CASE 5000 units 10000 units 20000 units 10000 units 25000 units 100000 units Jumper 0 Ω RC01 (1) − 711 91032 711 91005 711 92004 −−− RC11 (1) − 730 91002 730 91003 730 92002 731 91006 −− RC21 (2) − 702 96001 702 97001 702 92002 − 702 91002 − RC31 (2) −− 705 91001 −−− 705 91005 Ordering code (12NC)

• The resistors have a 12-digit ordering code starting with 2322
• The subsequent 5 digits indicate the resistor type and packaging; see Table 1.
• The remaining 3 digits indicate the resistance value: – The first 2 digits indicate the resistance value. – The last digit indicates the resistance decade in accordance with Table 2. Table 2 Last digit of 12NC RESISTANCE DECADE LAST DIGIT 1 to 9.76Ω 8 10 to 97.6Ω 9 100 to 976Ω 1 1 to 9.76 kΩ 2 10 to 97.6 kΩ 3 100 to 976 kΩ 4 1 to 9.76 MΩ 5

10 MΩ 6

The ordering code of a RC11 resistor, value 4700Ω with±2% tolerance, supplied on cardboard tape of 5000 units per reel is: 2322 730 31472.

1997 Feb 26 3

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 FUNCTIONAL DESCRIPTION Product characterization Standard values of nominal resistance are taken from the E24 series for resistors with a tolerance of±5% or±2%. The values of the E24 series are in accordance with “IEC publication 63”. Limiting values Note 1. This is the maximum voltage that may be continuously applied to the resistor element, see “IEC publication 115-8”. TYPE LIMITING VOLTAGE (1) (V) LIMITING POWER (W) RC01 200 0.25 RC11 150 0.125 RC21 50 0.063RC31 D ERATING The power that the resistor can dissipate depends on the operating temperature; see Fig.1. Fig.1 Maximum dissipation (Pmax ) in percentage of rated power as a function of the ambient temperature (Tamb ). CCA443 0− 55 50 70 100 155 125 100 Pmax (%P rated) RC31 RC01 RC11 RC21 T amb (°C) PULSE LOADING CAPABILITIES These pulses may not be applied on a regular basis. Fig.2 Maximum permissible peak pulse voltage without failing to ‘open circuit’ in accordance with DIN IEC 40 (CO) 533 for type:RC01 . handbook, full pagewidth 10 10 2 103 104 105 106 107 MBD641 104 102 103 V R (Ω )n 1.2/50 µs 10/700 µs max (V)

1997 Feb 26 4

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 Fig.3 Maximum permissible peak pulse voltage without failing to ‘open circuit’ in accordance with DIN IEC 40 (CO) 533 for type:RC11 . handbook, full pagewidth 10 10 2 103 104 105 106 107 MBD587 104 102 103 V R (Ω )n 1.2/50 µs 10/700 µs max (V) These pulses may not be applied on a regular basis. Fig.4 Maximum permissible peak pulse voltage without failing to ‘open circuit’ in accordance with DIN IEC 40 (CO) 533 for type:RC21 . handbook, full pagewidth 10 10 2 103 104 105 106 107 MBD590 104 102 103 1.2/50 µs 10/700 µs V (V) max R (Ω )n These pulses may not be applied on a regular basis.

1997 Feb 26 5

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 Fig.5 Pulse on a regular basis for type:RC01 ; maximum permissible peak pulse power as a function of pulse duration for R≤ 10 kΩ , single pulse and repetitive pulse tp/ti= 1000. Pˆmax() 10 6 10 5 10 4 10 3 10 2 10 1 1 MLB383 103 102 10 1 t (s)i P max (W) single pulse rep. pulse t /t = 1000pi Fig.6 Pulse on a regular basis for type:RC01 ; maximum permissible peak pulse voltage as a function of pulse duration. Vˆmax() handbook, full pagewidth 10 – 6 10 – 5 10 – 4 10 – 3 10 – 2 10 –1 1 MGA209 500 400 300 200 100 600 700 (V) max t (s)i

1997 Feb 26 6

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 Fig.7 Pulse on a regular basis for type:RC11 ; maximum permissible peak pulse power as a function of pulse duration for R≤ 10 kΩ , single pulse and repetitive pulse tp/ti= 1000. Pˆmax() handbook, full pagewidth 10 1 1 MBD588 103 102 10 210 310 410 510 6 10 1 P max (W) single pulse t /t =1000pi t (s)i Fig.8 Pulse on a regular basis for type:RC11 ; maximum permissible peak pulse voltage as a function of pulse duration. Vˆmax() handbook, full pagewidth600 200 400 MLB722 10 1 110 210 310 410 510 6 Vmax (V) t (s)i

1997 Feb 26 7

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 Fig.9 Pulse on a regular basis for type:RC21 ; maximum permissible peak pulse power as a function of pulse duration for R≤ 10 kΩ , single pulse and repetitive pulse tp/ti= 1000. Pˆmax() handbook, full pagewidth 10 1 1 MBD591 102 10 210 310 410 510 6 10 2 P max (W) single pulse t /t =1000pi 10 1 t (s)i Fig.10 Pulse on a regular basis for type:RC21 ; maximum permissible peak pulse voltage as a function of pulse duration. Vˆmax() handbook, full pagewidth300 100 200 MBD592 10 1 110 210 310 410 510 6 Vmax (V) t (s)i

1997 Feb 26 8

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 MECHANICAL DATA Mass per 100 units Marking Each resistor, except RC31, is marked with a three digit code (occasionally four digit) on the protective coating to designate the nominal resistance value. DIGIT MARKING For values up to 91Ω the R is used as a decimal point. For values of 100Ω or greater the first 2 digits are significant, the third indicates the number of zeros to follow. Example DIGIT MARKING For values up to 976Ω the R is used as a decimal point. For values of 1 kΩ or greater the first 3 digits are significant, the fourth indicates the number of zeros to follow. Example The packaging is also marked and includes resistance value, tolerance, TC value, catalogue number, quantity, production period, batch number and source code. TYPE MASS (g) RC01 1.0 RC11 0.55 RC21 0.25 RC31 0.052 MARKING RESISTANCE 12R 12 Ω 823 82 k Ω MARKING RESISTANCE 12R0 12 Ω 8202 82 k Ω Outlines Table 3 Chip resistor types and relevant physical dimensions; see Fig.11 TYPE L (mm) W (mm) T (mm) tt (mm) tb (mm) RC01 3.20 RC21 1.60 ±0.10 0.80 Fig.11 Outlines. handbook, 4 columns /n00/n00/n00/n00/n00/n00 /n00 /n00/n00/n00/n00 /n00 /n00 /n00/n00/n00/n00 /n00 /n00/n00/n00/n00/n00/n00 /n00 /n00 /n00 /n00/n00 /n00/n00 /n00/n00 /n00/n00 /n00/n00 /n00/n00 /n00/n00 protective coat resistor layer inner electrode end termination ceramic substrate protective coat MBE940 22R marking T W L tt tb For dimensions see Table 3.

1997 Feb 26 9

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with the schedule of“IEC publication 115-8”, category LCT/UCT /56 (rated temperature range: Lower C ategory Temperature,U pperC ategoryTemperature; damp heat, long term,56 days). The testing also covers the requirements specified by EIA and EIAJ. The tests are carried out in accordance with IEC publication 68,“Recommended basic climatic and mechanical robustness testingprocedure for electronic components” and under standard atmospheric conditions according to “IEC 68-1”, subclause 5.3. Unless otherwise specified the following values apply: Temperature: 15°Ct o3 5°C Relative humidity: 45% to 75% Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). In Table 4 the tests and requirements are listed with reference to the relevant clauses of “IEC publications 115-8 and 68”; a short description of the test procedure is also given. In some instances deviations from the IEC recommendations were necessary for our method of specifying. All soldering tests are performed with mildly activated flux. Table 4 Test procedures and requirements IEC 115-8 CLAUSE IEC 68-2 TEST METHOD TEST PROCEDURE RESISTANCE RANGE REQUIREMENTS RC01 RC11 RC21 RC31 Tests in accordance with the schedule of IEC publication 115-8 4.4.1 visual examination no holes; clean surface; no damage 4.4.2 dimensions (outline; see Fig.11) gauge (mm) 0.45 ≤ T ≤ 0.65 0.45≤ T ≤ 0.65 0.35≤ T ≤ 0.55 0.30≤ T ≤ 0.40 1.45≤ W ≤ 1.75 1.10≤ W ≤ 1.40 0.75≤ W ≤ 0.95 0.45≤ W ≤ 0.55 3.0≤ L ≤ 3.3 1.85≤ L ≤ 2.15 1.50≤ L ≤ 1.70 0.95≤ L ≤ 1.05 4.5 resistance applied voltage (+0/ −10%): R − R nom : max. ±2% or R − R nom : max. ±5% R − R nom : max. ±5%R<1 0 Ω : 0.1 V 10 Ω≤ R < 100Ω : 0.3 V 100 Ω≤ R<1k Ω :1V 1k Ω≤ R < 10 kΩ :3V 10 kΩ≤ R < 100 kΩ :1 0V 100 kΩ≤ R<1M Ω :2 5V R ≥ 1M Ω :5 0V

1997 Feb 26 10

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 4.18 20 (Ta) resistance to soldering heat unmounted chips; 10 s; 260±5 °C no visual damage ΔR/R max.: ±0.5% +0.05Ω ; no visual damage ΔR/R max.: ±1% +0.1Ω 4.29 45 (Xa) component solvent resistance isopropyl alcohol or H 2O followed by brushing in accordance with“MIL 202 F” no visual damage 4.17 20 (Ta) solderability unmounted chips completely immersed for 2±0.5 s in a solder bath at 235±5 °C good tinning (≥95% covered); no visual damage 4.7 voltage proof on insulation maximum voltage (RMS) during 1 minute metal block method no breakdown or flashover 4.13 short time overload room temperature; P = 6.25× Pn; 5 s (V≤ 2 × Vmax ) ΔR/R max.: ±1% +0.05Ω ΔR/R max.: ±2% +0.1Ω 4.33 bending resistors mounted on a 90 mm glass epoxy resin PCB (FR4), bending: 3 mm forRC01 and 5 mm forRC11 ,RC21 andRC31 no visual damage ΔR/R max.:±1% +0.05Ω 4.19 14 (Na) rapid change of temperature 30 minutes at LCT and 30 minutes at UCT; 5 cycles no visual damage ΔR/R max.: ±0.5% +0.05Ω no visual damage ΔR/R max.: ±2% +0.1Ω 4.23 climatic sequence: 4.23.3 30 (D) damp heat (accelerated) 1st cycle 4.23.6 30 (D) damp heat (accelerated) remaining cycles 6 days; 55°C; 95 to 98% RH R ins min.: 104 M Ω R ≤ 1M ΩΔ R/R max.: ±1.5% +0.1Ω ΔR/R max.: ±1% +0.1Ω R>1M ΩΔ R/R max.:±3% +0.1Ω not applicable IEC 115-8 CLAUSE IEC 68-2 TEST METHOD TEST PROCEDURE RESISTANCE RANGE REQUIREMENTS RC01 RC11 RC21 RC31

1997 Feb 26 11

Philips Components Product specification Standard chip resistors sizes 1206, 0805, 0603 and 0402 RC01/11/21/31 4.24.2 3 (Ca) damp heat (steady state) (IEC) 56 days; 40°C; 90 to 95% RH; loaded with 0.01 P n (IEC steps: 4 to 100 V) R ≤ 1M ΩΔ R/R max.: ±1.5% +0.1Ω ΔR/R max.: ±3% +0.1Ω R>1M ΩΔ R/R max.:±3% +0.1Ω not applicable 4.25.1 endurance (at 70°C) 1000 hours; loaded with Pn or Vmax ; 1.5 hours on and 0.5 hours off R ≤ 1M ΩΔ R/R max.: ±1.5% +0.1Ω ΔR/R max.: ±3% +0.1Ω R>1M ΩΔ R/R max.:±3% +0.1Ω not applicable 4.23.2 27 (Ba) endurance at upper category temperature 1000 hours; no load R ≤ 1M ΩΔ R/R max.: ±1.5% +0.1Ω ΔR/R max.: ±3% +0.1Ω R>1M ΩΔ R/R max.:±3% +0.1Ω not applicable 4.8.4.2 temperature coefficient at 20/LCT/20°C and 20/UCT/20°C (TC × 10 −6/K) R<5 Ω≤ ± 250 not applicable Other tests in accordance with IEC 115 clauses and IEC 68 test method 4.17 20 (Tb) solderability (after ageing) 8 hours steam or 16 hours 155°C; unmounted chips completely immersed for 2±0.5 s in a solder bath at 235±5 °C good tinning (≥95% covered); no damage 4.6.1.1 insulation resistance voltage (DC) after 1 minute, metal block method:

100 V forRC01 andRC11 ,

50 V forRC21 andRC31

R ins min.: 103 M Ω 4.12 noise IEC publication 195 (measured with Quantech - equipment) R ≤ 1k Ω max. 1µV/V R ≤ 10 kΩ max. 3µV/V R ≤ 100 kΩ max. 6µV/V R ≤ 1M Ω max. 10µV/V Other applicable tests humidity load (steady state) (JIS) 1000 hours; +40°C; 90 to 95% RH; loaded with P n or Vmax ; 1.5 hours on and 0.5 hours off R ≤ 1M ΩΔ R/R max.:±3% +0.1Ω R>1M ΩΔ R/R max.:±5% +0.1Ω not applicable leaching unmounted chips; 60 s; 260 ±5 °C good tinning; no leaching trio damp heat test 1 000 hours; +85°C; 85% RH; loaded with 0.1 Pn or Vmax R ≤ 1M ΩΔ R/R max.:±3% +0.1Ω R>1M ΩΔ R/R max.:±5% +0.1Ω not applicable IEC 115-8 CLAUSE IEC 68-2 TEST METHOD TEST PROCEDURE RESISTANCE RANGE REQUIREMENTS RC01 RC11 RC21 RC31