RBAP015AU SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Signal conditioned pressure sensors 1/6E / 11717 / A www.sensortechnics.com
FEATURES
absolute, gage or differential pressure
- Precision ASIC signal conditioning
- Temperature compensated
- Sensortechnics PRO services ELECTRICAL CONNECTION Note: Capacitor 220 nF required between +Vs and GND and 15 nF between Vout and GND. It is important to place the capacitors as close to the pins as possible! Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason! SPECIFICATIONS Maximum ratings Supply voltage VS 4.75 V to 5.25 VDC max. 6.50 VDC Output current Sink 2 mA Source 2 mA Lead temperature (2 - 4 sec.) 250 °C Temperature ranges Compensated 0 to +85 °C Operating -20 to +105 °C Storage -40 to +125 °C Vibration 10 g at 20 - 2000 Hz Shock RBAP... 100 g for 11 ms RBAH... 50 g for 11 ms Caution! The sensors are not reverse polarity protected. Incorrect applications of excitation voltage or ground to the wrong pin can cause electrical failure. Application of supply voltage above the maximum can cause electrical failure. RBA 15 nF 220 nF 5 6 7 8 4 +Vs Vout GND3 N/C N/C MEDIA COMPATIBILITY To be used with non-corrosive, non-ionic working fluids such as clean dry air, dry gases and the like.
Signal conditioned pressure sensors 2/6E / 11717 / A www.sensortechnics.com PRESSURE RANGES SPECIFICATIONS (VS = 5.0 VDC , TA = 25°C) rebmuntraPe gnarerusserPe russerptsruB 1 ).pyt(ytivitisneS BD500HABR5 ±...0 H" 2O isp 004.0 H"/V 2OBD010HABR0 1±...03 0 02.0 UD010HABR0 1...030 04.0 UA510PABR5 1...0 )a(isp )a(isp 762.0 isp/V UA030PABR0 3...00 63 31.0 UA001PABR0 01...00 510 40.0 U)D,G(100PABR1 ...0 )g(isp )g(isp 00.4 U)D,G(500PABR5 ...00 20 8.0 U)D,G(510PABR5 1...00 37 62.0 U)D,G(030PABR0 3...00 63 31.0 U)D,G(001PABR0 01...00 510 40.0 BD100PABR1 ±...0 )d(isp )d(isp 00.2 BD500PABR5 ±...00 20 4.0 BD510PABR5 1±...00 33 31.0 BD030PABR0 3±...00 67 60.0 BD001PABR0 01±...00 510 20.0 Specification notes: 1. If maximum burst pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may fracture. 2. Full Scale Span (FSS) is the algebraic difference between the output signal for the highest and lowest specified pressure. Span is ratiometric to the supply voltage. 3. Total accuracy is the combined error from offset and span calibration, linearity, pressure hysteresis, and temperature effects. Linearity is the measured deviation based on a straight line. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. Calibration errors include the deviation of offset and full scale from nominal values. 4. Delay time between sampling and signal change at the output. 5. The smallest change in the output voltage, given any change in pressure.
Signal conditioned pressure sensors 3/6E / 11717 / A www.sensortechnics.com PERFORMANCE CHARACTERISTICS 0.5 to 4.5 V ratiometric output (VS = 5.0 VDC , TA = 25°C) scitsiretcarahC. niM. pyT. xaMs tinU V srehtolla2 4.20 5.28 5.2 )SSF(napselacslluF 2 00.4 srehtolla2 4.40 5.48 5.4 srehtolla2 4.00 5.08 5.0 tesffonotceffeerutarepmeT 6 BD...HABR0 01± Vmsrehtolla0 8± etarelpmaS0 01z H yaledesnopseR 4 37.21 1.41s m petsnoitazitnauQ 5 3V m noitpmusnoctnerruC 6A m All RBA...U (unidirectional devices) scitsiretcarahC. niM. pyT. xaMs tinU tesffoerusserporeZU D010HABR0 4.00 5.00 6.0 V srehtolla2 4.00 5.08 5.0 )SSF(napselacslluF 2 00.4 tuptuoelacslluFU D010HABR0 4.40 5.40 6.4 srehtolla2 4.40 5.48 5.4 etarelpmaS0 01z H yaledesnopseR 4 37.21 1.41s m petsnoitazitnauQ 5 3V m noitpmusnoctnerruC 6A m All RBA...B (bidirectional devices)
Signal conditioned pressure sensors 4/6E / 11717 / A www.sensortechnics.com Differential (D) package Gage (G) package Absolute (A) package PHYSICAL DIMENSIONS dimensions in mm (inches) 16.89 (0.665) 1.27 typ (0.050 typ) 13.97 (0.550) 16.64 ±0.64 (0.655 ±0.025) 8.89 (0.350) 7.87 typ (0.310 typ) 4.5 (0.177) 2.54 typ (0.100 typ) 8.26 typ (.325 typ) 1.78 (0.070) 3.63 (0.143) 3.38 (0.133) 8.13 (0.320) 0.51 typ (0.02 typ) Low pressure port High pressure port 2.29 (0.090) 4.5 (0.177) 16.64 ±0.64 (0.655 ±0.025) 16.89 (0.665)1.27 typ (0.050 typ) 13.97 (0.550) 8.89 (0.350) 8.0 typ (0.315 typ) 2.29 typ (0.090 typ) 8.46 (0.333) 2.54 typ (0.100 typ) 0.51 typ (0.02 typ) 2 ° typ 16.89 (0.665) 1.27 typ (0.050 typ) 13.97 (0.550) 3.15 (0.124) 4.9 (0.193) 16.64 ±0.64 (0.655 ± 0.025) 8.89 (0.350)5.08 (0.200) 2.29 typ (0.090 typ) 4.5 (0.177) 2.54 typ (0.100 typ) 0.51 typ (0.02 typ) 6.99 (0.275) 1.19 typ (0.047 typ) 2.79 typ (0.11 typ) third angle projection
Signal conditioned pressure sensors 5/6E / 11717 / A www.sensortechnics.com ELECTRICAL CONNECTIONS RBA...AU Note: Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason! Vs (pin 1) identifier Vs (pin 1) identifier N/C N/C N/C N/C N/C N/C N/C N/C +Vs Vout GND N/C +Vs Vout GND N/C Vs (pin 1) identifier N/C N/C N/C N/C +Vs Vout GND N/C TOTAL ACCURACY (-20 to +105°C) -20 0 20 40 60 85 105 Temperature (°C) Total accuracy (%FSS) -1.0 -2.0 -3.0 3.0 2.0 1.0 For all RBAP... devices
Signal conditioned pressure sensors 6/6E / 11717 / A www.sensortechnics.com Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. egnarerusserP) A(etulosbA) G(egaG) D(laitnereffiD )U(lanoitceridinU Hhcni01...0 2O UD010HABR isp1...0 UG100PABR UD100PABR isp5...0U G500PABRU D500PABR isp51...0U A510PABR UG510PABR UD510PABR isp03...0 UA030PABR UG030PABRU D030PABR isp001...0 UA001PABR UG001PABR UD001PABR )B(lanoitceridiB Hhcni5±...0 2O BD500HABR Hhcni01±...0 2O BD010HABR isp1±...0 BD100PABR isp5±...0 BD500PABR isp51±...0 BD510PABR isp03±...0 BD030PABR isp001±...0 BD001PABR Sensortechnics PRO services:
- Extended guarantee period of 2 years
- Improved performance characteristics
- Custom product modifications and adaptations even for small quantities
- Advanced logistics models for supply inventory and short delivery times
- Technical support through application engineers on the phone or at your site
- Fastest possible technical response for design and QA engineers ... plus other services on request ORDERING INFORMATION - AVAILABLE LISTINGS Note: Preferred listings are highlighted in grey