RACT09 RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Triac –dimmable with leading or trailing edge dimmers
  • Class II with SELV output (no earth required)
  • Extra-large screw terminals and integrated cable clamps for easy installation
  • Power factor corrected >0.95
  • Dimming range 1..100%
  • Compatible with a wide range of dimmers RACT09

Description

The RACT09-xxx series are low cost, triac-dimmable, constant current 9W LED drivers available with either 350mA, 500mA or 700mA full-range outputs. The drivers are Class II (double insulated) meaning no earth connection is required. The phase angle dimming works with leading or trailing edge dimmers. The RACT09 is suitable for indoor locations up to 50°C ambient temperature and is certified for building into furniture for applications such as dimmable shelf lighting, cove lighting or accent lighting. It is CE marked (LVD + EMC + RoHS) and has IEC61347-1/IEC61347-2-13 CB report certification. Selection Guide Part Input Output Output Efficiency Output Number Voltage Range Voltage Range Current min. @rated load Power [VAC] [VDC] [mA] [%] [W] RACT09-350 198-264 13-26 350 80 9 RACT09-500 198-264 9-18 500 81 9 RACT09-700 198-264 7-13 700 76 9

3 YEAR

Parameter Condition Min. Typ. Max. Input Voltage Range 198VAC 230VAC 264VAC Input Current 60mA Inrush Current full load 5A No Load Power Consumption 1W Input Frequency Range 50Hz 60Hz Power Factor full load 0.95 continued on next page Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified) All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. Model Numbering Output CurrentOutput Power RACT09-___ M M IEC/EN61347 Certified IEC/EN61347-2-13 Certified EN61547 Certified EN62493 Certifed EN55015 Compliant CB Report

L-2 REV.: 0/2017 www.recom-power.com Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified) PROTECTION Parameter Condition Value Input Fuse fusible resistor Short Circuit Protection (SCP) Latch OFF, auto recovery after fault condition is removed Over Voltage Protection (OVP) RACT09-350 RACT09-500 RACT09-700 31VDC max. 25VDC max. 17VDC max. Latch OFF, auto recovery after fault condition is removed Over Load Protection (OLP) Latch OFF, auto recovery after fault condition is removed Over Temperature Protection (OTP) 110°C Latch OFF, auto recovery after fault condition is removed Isolation Voltage I/P to O/P tested for 1 minute 3.75kVAC Leakage Current 5mA max. RACT09 Series Maximum loading of automatic circuit breakers* Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A B 36 57 69 85 C 57 87 109 134 * @ 230VAC, 1Ohm, 90° phase angle and max. load ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without derating @ natural convection 0.1m/s (see graph) -20°C to +50°C Max. Case Temperature at tc point +80°C max. Operating Humidity non-condensing 5-85% RH IP Rating IP20 Pollution Degree PD2 Design Lifetime +25°C ambient >30 x 10³ hours continued on next page REGULATIONS Parameter Condition Value Output Accuracy ±5% typ. Load Regulation 5% max. Line Regulation 5% max. Parameter Condition Min. Typ. Max. THD full load 25% Start-up Time 500ms Internal Operating Frequency 60kHz Output Ripple Current (1) RACT09-350 RACT09-500 RACT09-700 175mA 350mA 900mA Notes: Note1: Measured at 20MHz BW by using a 12” twisted pair-wie terminated with a 0.1µF and 47µF capacitor parallel across output.

L-3REV.: 0/2017www.recom-power.com RACT09 Series Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified) -20 50403020100-10 100 Ambient Temperature [°C] Output Current [%] Derating Graph (@ Chamber and natural convection 0.1m/s) SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report Number Standard Lamp Controlgear General Requirments for Safety (CB Scheme) 325797 IEC61347-1:2007, 2nd Edition Lamp Controlgear Particular Requirements (CB Scheme) IEC61347-2-13: 2014, 2nd Edition Lamp Controlgear General Requirments for Safety (LVD) EN61347-1:2007, 2nd Edition Lamp Controlgear Particular Requirements (LVD) EN61347-2-13: 2014, 2nd Edition RoHS2+ RoHS 2011/65/EU + AM2015/863 EMC Compliance Condition Standard / Criterion Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EN55015: 2013 +A1 2015 Limits for harmonic current emissions IEC61000-3-2: 2014, Class C Limitation of voltage fluctuations/flicker in low-voltage systems IEC61000-3-3:2013 Equipment for general Lighting Purpose EMC Immunity Requirements IEC61547:2009 Assessment of lighting equipment related to human exposure to electromagnetic fields EN62493:2015 ESD Electrostatic discharge immunity test ±8kV Air Discharge, ±4kV Contact Discharge IEC61000-4-2, Criteria A Radiated, radio-frequency, electromagnetic field immunity test 3V/m IEC61000-4-3, Criteria A Fast Transient and Burst Immunity L-N= ±1kV; DC Output= ±0.5kV IEC61000-4-4, Criteria A Surge Immunity L-N= ±0.5kV IEC61000-4-5, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields 3V r.m.s. IEC61000-4-6, Criteria A Voltage Dips and Interruptions >95% reduction IEC61000-4-11, Criteria B 30% IEC61000-4-11, Criteria B DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case PCB Plastic (UL94V-2) FR4 (UL94V-0) Package Dimension (LxWxH) 109.0 x 40.0 x 22.0mm Package Weight 70g typ. continued on next page

INSTALLATION and APPLICATION Dimming Type Value AC phase-cut work with leading/trailing edge dimmers AC/DC Converter L-4 REV.: 0/2017 www.recom-power.com Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified) RACT09 Series Connection L N LED+ LED- 109.0 FC 13.0 Top View 40.022.0 15.4 10.0 15.0 PRI SECL N 27.5 66.1 PRI SEC L N +- Dimensions Drawing (mm) without cable cover\`s Connection via Screw Terminal Function Solid Wire Stranded Wire (3) AWG VAC in (N) 0.75-2.5mm² 0.75-2.5mm² 20-14 VAC in (L) 0.75-2.5mm² 0.75-2.5mm² 20-14 LED+ 0.5-2.5mm² 0.5-2.5mm² 21-14 LED- 0.5-2.5mm² 0.5-2.5mm² 21-14 wire stripping length: 6-7mm recommended tightening torque: 0.25Nm tc= case temperature measuring point FC = fixing centers Tolerance: xx.x= ±1.0mm xx.xx= ±0.5mm Notes: Note3: The use of sleeve or ferrule terminations is recommended.

The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) cardboard box 270.0 x 127.0 x 48.0mm Packaging Quantity 10pcs Storage Temperature Range -20°C to +70°C Storage Humidity non-condensing 5-85% RH L-5REV.: 0/2017www.recom-power.com RACT09 Series Specifications (measured @ ta= 25°C, 240VAC, rated load unless otherwise specified)