R80NECT1 MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MODEL: R80NECT1 R80NECT1 SPECIFICATIONS ES-7022 Rev.2 Page 1/4 http://www.m-system.co.jp/ Remote I/O R80 Series POWER/NETWORK MODULE (EtherCAT) Functions & Features

  • Free combination of analog and discrete I/O
  • Space-saving EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. (mm) 50 (1.97) 115 (4.53) 73 (2.87) MODEL: R80NECT1–R[1]

ORDERING INFORMATION

  • Code number: R80NECT1-R[1] Specify a code from below for [1]. (e.g. R80NECT1-R/Q)
  • Specify the specification for option code /Q (e.g. /C01) MODULE TYPE NECT1: EtherCAT POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating

RELATED PRODUCTS

  • PC configurator software (model: R80CFG)
  • ESI file The ESI file and configurator software are downloadable at M-System’s web site. For connecting to PC, use commercially available Mini-B type USB cable. (provided by user) PACKAGE INCLUDES...
  • Protective cover GENERAL SPECIFICATIONS Connection
  • Power input and excitation supply: Tension clamp terminal block (Front Twin connection)
  • EtherCAT: RJ-45 modular jack
  • Internal bus, internal power and excitation supply: Via bus connector Max. number of I/O modules: 16 (Max. consumption current of I/O modules: 1.6 A) Isolation: Internal bus or internal power or power input to excitation supply to EtherCAT or FE1 Status indicator LEDs: PWR, RUN, ERR, L/A IN, L/A OUT (For details, refer to the operating manual.) EtherCAT COMMUNICATION Standard: IEEE 802.3u Transmission type: 100BASE-TX Transmission speed: Full-duplex 100 Mbps Transmission media: 100BASE-TX (STP cable; Category 5e) Maximum internode length: 100 meters Fixed address: Set with rotary switches (The master must support MDP.) INSTALLATION Power consumption
  • DC: Approx. 12 W 24 V DC (@ internal power max. current

1.6 A) )

Internal power supply (power supply for I/O module):

  • DC power supply: 5 V DC
  • Current capacity: 1.6 A Excitation supply output (excitation for I/O module)
  • DC: 24 V DC ±10 %
  • Operational current: 10 A (From power and excitation supply connector, via connector for internal bus, supplied to each I/O module. Power output current consumption must be under operational current.)

MODEL: R80NECT1 R80NECT1 SPECIFICATIONS ES-7022 Rev.2 Page 2/4 http://www.m-system.co.jp/ Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: DIN rail Weight: 210 g (0.46 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (internal bus or internal power or power input to excitation supply to EthrtCAT or FE1) EXTERNAL VIEW PWR OUT IN ERR RUN L/A L/A Dev ID X16 ECT OUT ECT IN PC Configurator Connector Fixed Address Setting Rotary SW Connector for Power Supply and Excitation Supply Status Indicator LED Internal Bus Connector EtherCAT Communication RJ-45 Modular Jack WIRING

  • POWER SUPPLY AND EXCITATION SUPPLY CONNECTOR TERMINAL ASSIGNMENT Unit side connector: MSTBV2,5/5-GF-5, 08AU (Phoenix Contact) Cable side connector: TFKC2,5/5-STF-5, 08AU (Phoenix Contact) Applicable wire size: 0.2 − 2.5 mm2; stripped length 10 mm Recommended solderless terminal
  • AI0,25−10YE 0.25 mm2 (Phoenix Contact)
  • AI0,34−10TQ 0.34 mm2 (Phoenix Contact)
  • AI0,5−10WH 0.5 mm2 (Phoenix Contact)
  • AI0,75−10GY 0.75 mm2 (Phoenix Contact)
  • AI1−10RD 1.0 mm2 (Phoenix Contact)
  • AI1,5−10BK 1.5 mm2 (Phoenix Contact)
  • AI2,5−10BU 2.5 mm2 (Phoenix Contact) ID FUNCTION Grounding Power supply 24 V DC Power supply 0 V DC Excitation supply 24 V DC Excitation supply 0 V DC PIN No. 24 V 0 V FE1

MODEL: R80NECT1 R80NECT1 SPECIFICATIONS ES-7022 Rev.2 Page 3/4 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) ■UNIT 50 (1.97) 4 (.16) 73 (2.87) DIN RAIL (35 mm wide) 55 (2.17)[3 (.12)] 115 (4.53) 7 (.28) [4 (.16)] ■PROTECTIVE COVER 5 (.20) 50 (1 .97) 115 (4.53)

MODEL: R80NECT1 R80NECT1 SPECIFICATIONS ES-7022 Rev.2 Page 4/4 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Comm. CircuitControl Circuit +24 V 0 V FE1 RJ-45 MODULAR JACK RJ-45 MODULAR JACK Isolation INTERNAL BUS INTERNAL POWER (5V) EXC. SUPPLY (24V) BUS CONNECTOR EtherCAT (IN) EtherCAT (OUT) PC CONFIGURATOR CONNECTOR STATUS IND. LED ROTARY SW Isolation Power Circuit (No isolation) CONNECTOR POWER EXC. SUPPLY USB CONNECTOR Specifications are subject to change without notice.