R80DAT8A/Q

R80DAT8A MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

MODEL: R80DAT8A R80DAT8A SPECIFICATIONS ES-7023 Rev.0 Page 1/5 http://www.m-system.co.jp/ Remote I/O R80 Series NPN DISCRETE INPUT MODULE, 8 points (Tension clamp terminal block) Functions & Features

• 8 channels for discrete input, compact size remote I/O module
• 16 pins tension clamp connector 12 (.42) 115 (4.53) (mm) 73 (2.87) MODEL: R80DAT8A[1]

ORDERING INFORMATION

• Code number: R80DAT8A[1] Specify a code from below for [1]. (e.g. R80DAT8A/Q)
• Specify the specification for option code /Q (e.g. /C01) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating

RELATED PRODUCTS

• PC configurator software (model: R80CFG) Downloadable at M-System’s web site. For connecting to PC, use commercially available Mini-B type USB cable. (provided by user) GENERAL SPECIFICATIONS Connection Input: Separable tension clamp terminal Internal bus, internal power, excitation power supply: Connected to internal bus connector Isolation: Input or exc. supply to internal bus or internal power Module address: With rotary switch Terminating resistor: Built-in (DIP Switch, default: disable) Status indicator: Bi-color (red/green) LED; Refer to the instruction manual. Discrete input status indicators: Green LED; Refer to the instruction manual. INPUT SPECIFICATIONS Module type: Discrete input, 8 points Common: Positive common (NPN) Number of input: 8 points Maximum inputs applicable at once: No limit (at 24 V DC) Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max. ON voltage / current: ≥ 15 V DC (input – 24 V) / ≥ 2.3 mA OFF voltage / current: ≤ 5 V DC (input – 24 V) / ≤ 1 mA Input current: ≤ 4.5 mA per point at 24 V DC Input resistance: Approx. 5.7 kΩ ON delay: ≤ 0.2 msec. OFF delay: ≤ 0.5 msec. Read rate: 100 μsec., 400 μsec., 800 μsec., 4 msec., 8 msec., 16 msec., 40 msec. (Configurable with PC configurator) (Factory setting: 100 μsec. ) INSTALLATION Max. current consumption: 100 mA Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: DIN rail Weight: 80 g (2.82 oz) PERFORMANCE Power output (input terminal): Rated curent 3 A DC (rated current 3 A for internal fuse (slow blow fuse i2t (A2sec) max. 5.04) Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input or exc. supply to internal bus or internal power to ground)

MODEL: R80DAT8A R80DAT8A SPECIFICATIONS ES-7023 Rev.0 Page 2/5 http://www.m-system.co.jp/ EXTERNAL VIEW CARD ADD. SW1 SW2Term On RUN 8 67 345 210FEDCBA9 Status Indicator LED Discrete Input Status Indicator LED Internal Bus Connector Input Connectors ■ FRONT VIEW ■ SIDE VIEW Module Address Setting Rotary SW Terminator DIP SW

MODEL: R80DAT8A R80DAT8A SPECIFICATIONS ES-7023 Rev.0 Page 3/5 http://www.m-system.co.jp/ WIRING

• INPUT CONNECTOR Unit side connector: M-System’s product Cable side connector: DFMC1,5/2-ST-3,5 (Phoenix Contact) (included in the package) Applicable wire size: 0.2 − 1.5 mm2; stripped length 10 mm Recommended solderless terminal
• AI0,25−10YE 0.25 mm2 (Phoenix Contact)
• AI0,34−10TQ 0.34 mm2 (Phoenix Contact)
• AI0,5−10WH 0.5 mm2 (Phoenix Contact)
• AI0,75−10GY 0.75 mm2 (Phoenix Contact)
• A1−10 1.0 mm2 (Phoenix Contact)
• A1,5−10 1.5 mm2 (Phoenix Contact) Di 1 Di 2 Di 3 Di 4 Di 5 Di 6 Di 7 Di 8 0 V 0 V 24 V 24 V NC NC NC NC PIN No. ID FUNCTION Di 1 Di 2 Di 3 Di 4 Di 5 Di 6 Di 7 Di 8 0 V 0 V 24 V 24 V NC NC NC NC INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 INPUT 8 Excitation supply 24 V DC Excitation supply 24 V DC Excitation supply 0 V DC Excitation supply 0 V DC No connection No connection No connection No connection OPERATING MODE SETTING
• Module address setting Module address: Selectable between 0 and F, with rotary switch (Factory setting: 0)
• Terminator DIP SW TERMINATOR SW SW2 Without ( *) OFF With ON (*) Factory setting

MODEL: R80DAT8A R80DAT8A SPECIFICATIONS ES-7023 Rev.0 Page 4/5 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) 12 (.47) 73 (2.87) DIN RAIL (35 mm wide) [4 (.16)] 55 (2.17) [3 (.12)]

MODEL: R80DAT8A R80DAT8A SPECIFICATIONS ES-7023 Rev.0 Page 5/5 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM 0 V +24 V Di 1 Di 2 Di 3 Di 4 Di 5 Di 6 Di 7 Di 8 0 V 0 V 0 V 0 V 5.7 kΩ Di 1 24 V 24 V Di 8 0 V 0 V ■ INPUT CIRCUIT +24 V 3 A 24 V 24 V Di 1 Di 8 STATUS IND. LED INTERNAL BUS EXC. SUPPLY INTERNAL POWER Input Circuit Power Circuit Comm. Circuit Control Circuit ROTARY SW DIP SW DISCRETE INPUT STATUS IND. LED +24 V * The fuse is not replaceable. Control Circuit Detection Detection BUS CONNECTOR Specifications are subject to change without notice.