R7C-AN2P2B

R7C-AN2P2B EVERLIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

Features

․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain with in RoHS compliant version Descriptions ․The 17-215 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. ․Indoor signboard use. Device Selection Guide Chip Part No. Material Emitted Color Resin Color 17-215/R7C-AN2P2B/DT AlGaInP Dark-Red Water Clear

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua Package Outline Dimensions Note: The tolerances unless mentioned are ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage V R 5 V Forward Current I F 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Power Dissipation P d 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 36.0 ----- 72.0 mcd Viewing Angle 2 θ1/2 ----- 130 ---- deg Peak Wavelength λp ---- 639 ---- nm Dominant Wavelength λd 625.5 ---- 637.5 nm Spectrum Radiation Bandwidth △λ ----- 20 ---- nm Forward Voltage V F 1.75 ---- 2.35 V IF =20mA Reverse Current I R ---- ---- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua Bin Range Of Dom. Wavelength Groups Bin Min Max Unit Condition E6 625.5 629.5 E7 629.5 633.5 A E8 633.5 637.5 nm I F =20mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition N2 36.0 45.0 P1 45.0 57.0 P2 57.0 72.0 mcd I F =20mA Bin Range Of Luminous Voltage Group Bin Min Max Unit Condition 0 1.75 1.95 1 1.95 2.15 B 2 2.15 2.35 V IF =20mA Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua Typical Electro-Optical Characteristics Curves 500 100 550 600 650 700 Ta=25°C Forward Voltage V (V) Relative luminous intensity (%) -60 Forward Current Derating Curve Ambient Temperature Ta (°C) Forward Current FI (mA) -20-40 0 20 6040 100 80 Relative luminous intensity (%) 100 1000 Forward Current Wavelength λ (nm) Luminous Intensity vs. Ambient Temperature I (mA)F Spectrum Distribution Forward Voltage F Ta=25°C Forward Current vs. Relative luminous intensity (%)1 100 1000 Forward Current I (mA) F Ta=25°C Luminous Intensity vs. Forward Current 30° 20° Ta=25°C 10°0° Radiation Diagram 40° 60° 50° 90° 80° 0.6 70° 1.0 0.8 0.9 0.7 Ambient Temperature Ta (°C) 1.20 10 10 4020 60 100 85

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua xxxxxx xxxxxx xxxxxxxxxxxx xxxx xxxxxxxx RoHS Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85% RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD. 17-215/R7C-AN2P2B/DT Device No. : DSE-175- Prepared date: 31-Jul-2007 Prepared by: Zhouhua 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com