R6N-TS2A. MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: R6N-TS2A R6N-TS2A SPECIFICATIONS ES-7781-BR Rev.0 Page 1/3 http://www.m-system.co.jp/ Remote I/O R6 Series THERMOCOUPLE INPUT MODULE (high-accuracy, 2 points, Screw terminal) Functions & Features

  • Accepts direct input from an thermocouple and provides an isolated, linearized DC signal compact size remote I/O module mm (inch) 7.5 (.30) 102 (4.02) 102 (4.02) MODEL: R6N–TS2A[1]

ORDERING INFORMATION

  • Code number: R6N-TS2A[1] Specify a code from below for [1]. (e.g. R6N-TS2A/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating

RELATED PRODUCTS

  • PC configurator software (model: R6CON) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types. GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R6N-BS) Input: M3 screw terminals (torque 0.5 N·m) Internal power: Via the Installation Base (model: R6N-BS) Recommended solderless terminal: Max. 5.8 mm (0.23”) wide; Ones with insulation sleeve do not fit. Applicable wire size: 0.2 – 2.5 mm2 Housing material: Flame-resistant resin (black) Isolation: Input 1 to input 2 to internal bus or internal power Zero adjustments: PC programming Span adjustments: PC programming Input type: Selectable with the side DIP SW or PC programming Burnout detection: Upscale or downscale selectable with the side DIP SW or PC programming Linearization: Standard Cold junction compensation: CJC sensor attached to the input terminals Module address: Selectable with DIP and rotary switches on the side Configuration mode: With DIP switches on the side panel Power indicator: Green LED; Refer to the istruction manual for details. Status indicator: Bi-color (red/green) LED; Refer to the instruction manual for details. ■Recommended solderless terminal (unit: mm (inch)) 3.2 (.13) dia. 4 min. (.16) 5.8 max. (.23) 5.5 max. (.22) INPUT SPECIFICATIONS Thermocouple: K, E, J, T, B, R, S, C, N, U, L, P, PR Input resistance: 30 kΩ min. Burnout sensing: ≤ 0.1 μA T/C USABLE RANGE (°C) CONFORMANCE RANGE (°C) K (CA) E (CRC) J (IC) -272 to +1472 -272 to +1100 -260 to +1300 -150 to +1370 -170 to +1000 -180 to +1200 T (CC) B (RH) R -272 to +500 24 to 1920 -100 to +1860 -170 to +400 1000 to 1760 380 to 1760 S C (WRe 5-26) N -100 to +1860 -52 to +2416 -272 to +1400 400 to 1760 100 to 2315 -130 to +1300 U L P (Platinel II ) (PR) -252 to +700 -252 to +1000 -52 to +1496 -52 to +1860 -200 to +600 -200 to +900 0 to 1395 300 to 1760

MODEL: R6N-TS2A R6N-TS2A SPECIFICATIONS ES-7781-BR Rev.0 Page 2/3 http://www.m-system.co.jp/ INSTALLATION Current consumption: 20 mA Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R6N-BS) Weight: 70 g (2.5 oz) PERFORMANCE Conversion accuracy: ±0.5°C (±0.9°F) except ±1°C (±1.8°F) for B, R, S, C, PR Conversion rate: 250 msec. / 500 msec.(PC programmable. Factory set to 500 msec.) Converted data range:

  • Engineering unit value (°C, K) × 10 (integer)
  • Engineering unit value (°F) Data allocation: 2 Cold junction compensation error: ±1°C max. at 25 ±10°C ±1.8°F max. at 77 ±18°F Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span Response time: Conversion rate × 2 + 50 msec. or less Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input 1 to input 2 to internal bus or internal power to ground) EXTERNAL VIEW 867 345 210FEDCBA9
  • Front View (cover opened) • Side View 5 6 7 8 1 2 3 4 SW3 SW2 SW1 2 3 4 5 6 7 8 OFF ON SW3 SW2 SW1 Module Address Setting Operating Mode Setting Status LED Power LED Refer to the instruction manual for setting procedures.

MODEL: R6N-TS2A R6N-TS2A SPECIFICATIONS ES-7781-BR Rev.0 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 102 (4.02) 7.5 (.30) *Screwdriver stem diameter: 6 mm (.24”) or less 102 (4.02) 8–M3 SCREW TERMINAL WIRE INSERTION ANGLE : approx. 35° SCREWDRIVER INSERTION ANGLE : approx. 55° 5 6 7 8 1 2 3 4 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM INPUT 1 INTERNAL POWER INTERNAL BUS Input Circuit STATUS LED INPUT 2 Input Circuit ROTARY SW DIP SW POWER LED T/C comp. leadwire T/C comp. leadwire Comm. Circuit CJC SENSOR CJC SENSOR BUS CONNECTOR Control Circuit Specifications are subject to change without notice.