R6G6BHC-A01

R6G6BHC-A01 EVERLIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Full-color type. Descriptions ․The 15-23B SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color Lens Color R6 AlGaInP Brilliant Red G6 InGaN Brilliant Yellow Green BH InGaN Blue Water Clear

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Package Outline Dimensions Notes: Tolerances Unless Dimension ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage V R 5 V Forward Current I F R6:25 G6:25 BH:25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol 260 (for 5 seconds) Electrostatic Discharge ESD R6:2000 G6:150 BH:150 V Power Dissipation Pd R6:60 G6:110 BH:110 mW Peak Forward Current (Duty 1/10 @1KHz) IF P R6:60 G6:100 BH:100 mA

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity I v G 6 B H 28.5 28.5 100 180 mcd Viewing Angle 2θ1/2 ----- 120 ----- deg Peak Wavelength R 6 λp G 6 B H ----- 632 575 468 ----- nm Dominant Wavelength R 6 λd G 6 B H 619 568 465 ----- 629 575 480 nm Spectrum Radiation Bandwidth R 6 △λ G 6 B H ----- ----- nm Forward Voltage R 6 VF G 6 B H ----- 2.0 2.0 3.5 2.4 2.4 3.9 V IF=20mA Reverse Current R 6 IR G 6 B H ----- ----- μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Typical Electro-Optical Characteristics Curves BH

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Aluminum moistue-proof bag LabelDesiccantLabel

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 240℃±5℃ 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/R.H85% 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 ℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition

3.1 Lead solder temperature profile

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

EVERLIGHT ELECTRONICS CO.,LTD. 15-23B/R6G6BHC-A01/2T Device No:DSE-153- Prepared date: 09-08-2003 Prepared by: Jeff Tsai 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com