R6D-SV2/Q

R6D-SV2 MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: R6D-SV2 R6D-SV2 SPECIFICATIONS ES-7781-AD Rev.0 Page 1/3 http://www.m-system.co.jp/ Remote I/O R6 Series DC VOLTAGE INPUT MODULE (2 points, Euro terminal) Functions & Features

• 2 channels for DC voltage input, compact size remote I/O module
• Isolation between channels
• Input range adjustment with DIP switch or PC configurator 5.9 (.23) (3.70) 102 (4.02) mm (inch) MODEL: R6D–SV2[1]

ORDERING INFORMATION

• Code number: R6D-SV2[1] Specify a code from below for [1]. (e.g. R6D-SV2/Q)
• Specify the specification for option code /Q (e.g. /C01) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating

RELATED PRODUCTS

• PC configurator software (model: R6CON) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types. GENERAL SPECIFICATIONS Connection Internal bus: Via the Installation Base (model: R6D-BS) Input: Euro terminal block (torque 0.3 N·m) (Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm) Internal power: Via the Installation Base (model: R6D-BS) Housing material: Flame-resistant resin (black) Isolation: Input 1 to input 2 to internal bus or internal power Zero adjustments: PC programming Span adjustments: PC programming Input range: Selectable with the side DIP SW or PC programming Module address: Selectable with DIP and rotary switches on the side Configuration mode: With DIP switches on the side panel Power indicator: Green LED; Refer to the istruction manual for details. Status indicator: Bi-color (red/green) LED; Refer to the instruction manual for details. INPUT SPECIFICATIONS ■ Narrow Span: -1 – +1 V, 0 – 1 V, -0.5 – +0.5 V DC Input resistance: 100 kΩ min. ■ Wide Span: -10 – +10 V, -5 – +5 V, 0 – 10 V, 0 – 5 V, 1 – 5 V DC Input resistance: 1 MΩ min. INSTALLATION Current consumption: 20 mA Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Mounting: Installation Base (model: R6D-BS) Weight: 60 g (2.1 oz) PERFORMANCE Conversion rate (PC programmable. Factory set to 80 msec.)/conversion accuracy: 10 msec./±0.8 % 20 msec./±0.4 % 40 msec./±0.2 % 80 msec./±0.1 % Data range: 0 – 10000 of the input range Data allocation: 2 Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) Response time: Conversion rate × 2 + 50 msec. or less Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 1500 V AC @ 1 minute (input 1 to input 2 to internal bus or internal power to ground)

MODEL: R6D-SV2 R6D-SV2 SPECIFICATIONS ES-7781-AD Rev.0 Page 2/3 http://www.m-system.co.jp/ STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581 EXTERNAL VIEW 867 345 210FEDCBA9

• Front View (cover opened) • Side View 5 6 7 8 1 2 3 4 SW3 SW2 SW1 2 3 4 5 6 7 8 OFF ON SW3 SW2 SW1 Module Address Setting Operating Mode Setting Status LED Power LED Refer to the instruction manual for setting procedures. EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 5.9 (.23) 102 (4.02) 5 6 7 8 1 2 3 4 8–M3 EURO TERMINAL WIRE INSERTION ANGLE: approx. 7°

MODEL: R6D-SV2 R6D-SV2 SPECIFICATIONS ES-7781-AD Rev.0 Page 3/3 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM INPUT 1 NARROW SPAN WIDE SPAN INTERNAL POWER INTERNAL BUS Control Circuit Communication Circuit Input Circuit BUS CONNECTOR STATUS LED INPUT 2 NARROW SPAN WIDE SPAN Input Circuit ROTARY SW DIP SW POWER LED Specifications are subject to change without notice.