R6D-BS MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MODEL: R6D-BS R6D-BS SPECIFICATIONS ES-7781-AA Rev.0 Page 1/5 http://www.m-system.co.jp/ Remote I/O R6 Series INSTALLATION BASE (Euro terminal) Functions & Features

  • Installation base dedicated to Remote I/O R6 Series MODEL: R6D-BS[1][2]

ORDERING INFORMATION

  • Code number: R6D-BS[1][2] Specify a code from below for each [1] and [2]. (e.g. R6D-BS8A/Q)
  • Specify the specification for option code /Q (e.g. /C01) [1] NUMBER OF SLOTS 8A: 8 I/O slots + Network Module (18 mm wide) 8B: 8 I/O slots + Network Module (36.5 mm wide) (Selectable only for using with R6-NF1, R6-NC3/W or R6-PSM) 8P: 8 I/O slots for extension [2] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) Only solder side of the PWB is coated. /C01: Silicone coating /C02: Polyurethane coating GENERAL SPECIFICATIONS Construction: DIN rail or surface mounting Capacity:
  • R6D-BS8A: I/O / power supply module, 8 slots + network (18 mm wide) module
  • R6D-BS8B: I/O / power supply module, 8 slots + network (36.5 mm wide) module
  • R6D-BS8P: I/O / power supply module, 8 slots Housing material: Flame-resistant resin (black) INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Atmosphere: No corrosive gas or heavy dust Construction: DIN rail or surface mounting Weight (No remote I/O module mounted) R6D-BS8A: 80 g (2.8 oz) R6D-BS8B: 95 g (3.4 oz) R6D-BS8P: 50 g (1.8 oz) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @ 1 minute (internal power or internal field signal to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EN 50581

MODEL: R6D-BS R6D-BS SPECIFICATIONS ES-7781-AA Rev.0 Page 2/5 http://www.m-system.co.jp/ EXTERNAL VIEW Mount I/O and power supply modules, starting from the left end. The power supply module could be mounted at any slots, however, installing them at either end is generally recommended. ɾɾɾ I/O & Power Supply Modules ɾɾɾ ■ R6D-BS8A ■ R6D-BS8B

  • R6-NF1 ■ R6D-BS8P ɾɾɾ
  • R6-PSM Power Supply Module Network Module ɾɾɾ I/O & Power Supply Modules Network Module Network Module I/O & Power Supply Modules I/O Modules

MODEL: R6D-BS R6D-BS SPECIFICATIONS ES-7781-AA Rev.0 Page 3/5 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) 72 (2.83) 37 (1.46) 3 (.12) 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep

  • R6D-BS8A
  • R6D-BS8P 99 (3.90) 70 (2.76) 5 (.20) 5 (.20) 14 (.55) 22.5 (.89) 116 (4.57) 24.4 (.96) [3 (.12)] (.55) (.63) 49 (1.93) DIN RAIL 35mm wide 49 (1.93) 37 (1.46) 11.5 (.45) 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep 99 (3.90) 70 (2.76) 5 (.20) 5 (.20) 14 (.55) 24.4 (.96) [3 (.12)]
  • R6D-BS8B 99 (3.90) 70 (2.76) 5 (.20) 5 (.20) 37 (1.46) 3–4.5 (.18) dia. MTG HOLE 2 (.08) deep 24.4 (.96) 14 (.55)

MODEL: R6D-BS R6D-BS SPECIFICATIONS ES-7781-AA Rev.0 Page 4/5 http://www.m-system.co.jp/ MOUNTING REQUIREMENTS unit: mm (inch) ■ MOUNTING DIRECTION The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise, may shorten the product’s life expectation or deteriorate its performance. (.39) Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)R6D-BS Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.) (.39) (.55) 40 (1.6) 37 (1.46) 3–M4

  • R6D-BS8A
  • R6D-BS8B 37 (1.46) 69.6 (2.74) 37 (1.46) 3–M4 37 (1.46) 11.8 (.46) n–M4 *
  • R6D-BS8A+BS8P 37 (1.46) 37 (1.46) 11.8 (.46)
  • R6D-BS8B+BS8P n–M4 * 27.4 (1.08) 50.6 (1.99) *Number of bases x 3 24.4 (.96) ■ SURFACE MOUNTING

MODEL: R6D-BS R6D-BS SPECIFICATIONS ES-7781-AA Rev.0 Page 5/5 http://www.m-system.co.jp/ Specifications are subject to change without notice.