R5M RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

  • 5W power in SMD package
  • 4:1 Input voltage range
  • Efficiency up to 86%
  • 1.6kVDC/1min isolation
  • Regulated output
  • -40°C to +50°C at full load
  • Continuous short circuit protected R5M Selection Guide Model Numbering YEAR warr anty3 RECOMCONVERTERS COM PLIANT PRODUCTS REACH compliant RECOMCONVERTERS COM PLIANT PRODUCTS RoHS compliant 10 from 10 Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Part Input nom. Output Output Efficiency max. Capacitive Number Voltage Range (1) Voltage Current typ. (2) Load (3) [VDC] [VDC] [mA] [%] [µF] R5M-xx3.3S/SMD 9-36, 18-75 3.3 1000 77 4400 R5Mxx05S/SMD 9-36, 18-75 5 1000 81 2200 R5Mxx09S/SMD 9-36, 18-75 9 555 82 1470 R5M-xx12S/SMD 9-36, 18-75 12 420 84-85 1220 R5M-xx15S/SMD 9-36, 18-75 15 333 85-86 1000 R5M-xx24S/SMD 9-36, 18-75 24 210 82 470 R5M-xx05D/SMD 9-36, 18-75 ±5 ±500 82 ±1000 R5M-xx12D/SMD 9-36, 18-75 ±12 ±210 84 ±680 R5M-xx15D/SMD 9-36, 18-75 ±15 ±168 85 ±440 Notes: Note1: Refer to “Input Voltage Range” Note2: Efficiency is tested at nominal input and full load at +25°C ambient Note3: Max Cap Load is tested at nominal input and full resistive load BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range nom. VIN= 24VDC 9VDC 24VDC 36VDC nom. VIN= 48VDC 18VDC 48VDC 75VDC Input Surge Voltage 1 second max. nom. VIN= 24VDC 50VDC nom. VIN= 48VDC 100VDC continued on next page Case Style Single/Dual nom. Input Voltage nom. Output Voltage R5M- /SMD

5 Watt

Single & Dual Output

www.recom-power.com REV.: 0/2023 ECO-2 DC/DC Converter R5M Series BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Quiescent Current nom. VIN= 24VDC 30mA nom. VIN= 48VDC 15mA Start-up time power up, CTRL ON/OFF 10ms 20ms ON/OFF CTRL (4) DC-DC ON open or high impedance DC-DC OFF 2mA 3mA 4mA Standby Current DC-DC OFF 2.5mA Internal Operating Frequency 100kHz Output Ripple and Noise 20MHz BW 50mVp-p Reflected Back Ripple Current with external components nom. VIN= 24VDC 20mAp-p nom. VIN= 48VDC 15mAp-p continued on next page Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Efficiency vs. LoadR5M-2405S Power Dissipation vs. Load 0 10 20 30 40 50 60 70 80 90 100 100 Efficiency [%] Output Load [%] 9Vin 18Vin 24Vin 36Vin 1.2 1.4 0.6 1.8 1.6 0.8 0.2 0.4 Power Dissipation [W] 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] 9Vin 18Vin 24Vin 36Vin Efficiency vs. LoadR5M-4812S Power Dissipation vs. Load 0 10 20 30 40 50 60 70 80 90 100 100 Efficiency [%] Output Load [%] 18Vin 36Vin 54Vin 75Vin 0.8 1.2 0.6 0.4 1.4 0.2 Power Dissipation [W] 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] 18Vin 36Vin 54Vin 75Vin Notes: Note4: Refer to “ON/OFF CTRL”

www.recom-power.com REV.: 0/2023 ECO-3 DC/DC Converter R5M Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Efficiency vs. LoadR5M-4824S Power Dissipation vs. Load 0 10 20 30 40 50 60 70 80 90 100 100 Efficiency [%] Output Load [%] 18Vin 36Vin 54Vin 75Vin 1.2 0.6 1.6 1.4 0.8 0.2 0.4 Power Dissipation [W] 0 10 20 30 40 50 60 70 80 90 100 Output Load [%] 18Vin 36Vin 54Vin 75Vin ON/OFF CTRL +Vout+Vin CTRL -Vout-Vin -Vout +Vout -Vin +Vin VCTRL 1kΩ REGULATIONS Parameter Condition Value Output Accuracy ±1.0% max. Line Regulation low line to high line, full load ±0.2% max. Load Regulation 0% to 100% load single 1% max. dual 1% max. 10% to 90% load single 0.5% max. dual 0.8% max. Cross Regulation asymmetrical 25% / 100% load ±5% max. Transient Response Recovery Time 25% load step change ±500µs typ. PROTECTIONS Parameter Type Value Short Circuit Protection (SCP) continuous, auto recovery Isolation Voltage (5) I/P to O/P 1 minute 1.6kVDC min. Isolation Resistance I/P to O/P , VISO= 500VDC 1GΩ min. Isolation Capacitance I/P to O/P , 100kHz/0.1V 50pF typ. Notes: Note5: This power module is not internally fused. An input line fuse must always be used Recom suggests: 24Vin=T1.25A; 48Vin=T0.63A slow blow DC-DC ON Open or high impedance DC-DC OFF 2.0mA to 4.0mA max.

www.recom-power.com REV.: 0/2023 ECO-4 DC/DC Converter R5M Series Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) ENVIRONMENTAL Parameter Condition Value Operating Temperature Range with derating -40°C to +105°C without derating -40°C to +50°C Maximum Case Temperature measured at “tc point” +105°C Operating Humidity non-condensing 5% - 95% RH max. Thermal Shock according to MIL-STD-810F Vibration according to MIL-STD-810F MTBF according to MIL-HDBK-217F, G.B. +25°C 2959 x 10³ hours Derating Graph (@ Chamber and natural convection 0.1m/s) -40 -20 0 20 40 7060-30 -10 10 30 50 80 90 120110100 100 Output Load [%] Ambient Temperature [°C] 105 SAFETY AND CERTIFICATIONS Certificate Type (Safety) File Number Standard RoHS2 RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Standard / Criterion Electromagnetic compatibility of multimedia equipment – Emission Requirements with external filter refer to “EMC Filtering” EN55032, Class A and B Suggestions according to EN55032EMC Filtering -Vout +Vout -Vin +Vin +Vout+Vin -Vout-Vin Class A Component List Model C1 C2 C3 L1 R5M-24xxS 10µF N/A 330pF 22µH R5M-48xxS 2.2µF 2.2µF 330pF 68µH Class B Component List Model C1 C2 C3 L1 R5M-24xxS 10µF N/A 680pF 22µH R5M-48xxS 4.7µF 2.2µF 680pF 68µH

www.recom-power.com REV.: 0/2023 ECO-5 DC/DC Converter Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) R5M Series DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material baseplate/case black plastic (UL94 V-0) potting silicone (UL94 V-0) Dimension (LxWxH) 14.2 x 9.1 x 10.2mm Weight 2.7g typ. Pinning Information Pin # Single Dual 1 +Vin +Vin 2 -Vin -Vin

4 CTRL CTRL

5 NC -Vout

NC= no connection 13.2 16.2 min. 5.70 tc seating plane 0 ~5° 9.1 10.1 min. 1.6 2.1 3.8 1.404.7 14.2 2.00 6.00 0.60±0.1 0.20±0.1 9.9 10.2 67 72 Dimension Drawing standard “/SMD” version (mm) PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 218.0 x 17.2 x 19.9mm Packaging Quantity 20pcs Storage Temperature Range non-condensing -55°C to +125°C Storage Humidity 5% to 95% RH max. Moisture Sensitive Level MSL peak temp. (6) Level 2 The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. Recommended Footprint Details Tolerance: xx.x xx.xx ±0.5mm ±0.25mm tc point Notes: Note6: The Moisture Sensitivity Level rating is according to the JEDEC industry standard classifications and peak solder temperature