R1511J071B

Datasheet search site | www.alldatasheet.com

Document overview

• PDF pages: 26

Technical content

NO.EA-300-221111 OUTLINE The R1511x Series are CMOS-based high-voltage resistant and fast response voltage regulators that provide the minimum 300mA of output current. Internally, R1511x consists of an Output Short-circuit Protection Circuit, an Over-current Protection Circuit , and a Thermal Shutdown Circuit in addition to the basic regulator circuits. The operating temperature range is between – 40ºC to + 105ºC, and the maximum input voltage is 36V. All these features allow the R1511x Series to become an ideal power source of electric home appliances. R1511x is available in B version (R1511xxxxB) with the fixed output voltage type, and C version (R1511x001C) with adjustable output voltage type with external resistors. The output voltage accuracy is ±1.0%. R1511x is available in two types of packages: HSOP- 6J for high-density mounting and TO-252-5-P2 for high wattage.

FEATURES

(For other voltages, please refer to MARK INFORMATIONS.) R1511xxxxC: 3.0V to 12.0V

• Output Voltage Temperature-Drift Coefficient ········ Typ. ±60ppm/°C
• Built-in Output Short-circuit Protection Circuit ······· Typ. 50mA
• C eramic capacitors are recommended to be used with this IC

APPLICATIONS

• For home electrical appliances: refrigerators, rice cookers, electrical pots, etc.
• For digital equipments: laptop PCs, digital TVs, telephone equipments, home LAN systems, etc.
• For OA equipments: copy machines, printers, fax machines, scanners, projectors, etc.

NO.EA-300-221111 BLOCK DIAGRAMS R1511xxxxB R1511x001C Vref Thermal Shutdown Current Limit ON/OFF Circuit VDD CE GND VOUT Vref Thermal Shutdown Current Limit VDD VFB GND VOUT SELECTION GUIDE The output voltage, version and the package type for the ICs can be selected at the user’s request. Product Name Package Quantity per Reel Pb Free Halogen Free R1511Sxxx∗-E2-FE HSOP-6J 1,000pcs Yes Yes R1511Jxxx∗-T1-FE TO-252-5-P2 3,000pcs Yes Yes xxx : Specify the output setting voltage (VSET) R1511xxxxB: Specify the output voltage within the range of 3.0V (030) to 9.0V (090) in 0.1V steps. (For other voltages, please refer to MARK INFORMATIONS.) R1511x001C: only (001) ∗ : Specify the version (B) Fixed output and Built-in Chip Enable (“H” active) (C) Adjustable output

NO.EA-300-221111 PIN CONFIGHURATIONS

• HSOP-6J • TO-252-5-P2 1 3 6 4 1 2 3 4 5 PIN DESCRIPTIONS R1511S:HSOP-6J Pin No. Symbol Description

1 VDD Input Pin

2 GND* Ground Pin

3 GND* Ground Pin

CE R1511SxxxB Chip Enable Pin (“H” Active) VFB R1511S001C Feed Back Pin

5 GND* Ground Pin

6 VOUT Output Pin

*) No. 2, No. 3 and No. 5 pins must be wired to the GND plane when they are mounted on board. R1511J:TO-252-5-P2 Pin No. Symbol Description CE R1511JxxxB Chip Enable Pin (“H” Active) VFB R1511J001C Feed Back Pin

5 VOUT Output Pin

*) No. 2 and No. 3 pins must be wired to the GND plane when they are mounted on board.

NO.EA-300-221111 PIN EQIVALENT CIRCUIT DIAGRAMS <VOUT Pin> <CE Pin (R1511xxxxB)> <VFB Pin (R1511x001C)> VOUT Driver CE VFB ABSOLUTE MAXIMUM RATINGS Symbol Item Rating Unit VIN Input Voltage -0.3 to 50 V VIN Peak Input Voltage∗1 60 V VCE Input Voltage (CE Pin) -0.3 to 50 V VFB Input Voltage (VFB Pin) -0.3 to 50 V VOUT Output Voltage -0.3 to VIN+0.3 ≤ 50 V PD Power Dissipation (JEDEC STD. 51-7) ∗2 HSOP-6J 2700 mW TO-252-5-P2 3800 Tj Operating Junction Temperature Range -40 to +125 °C Tstg Storage Temperature Range -55 to +125 °C ∗1) Duration time: 200ms ∗2) For Power Dissipation, please refer to next page to be described. ABSOLUTE MAXIMUM RATINGS Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent damages and may degrade the lifetime and safety for both device and system using the device in the field. The functional operation at or over these absolute maximum ratings are not assured. RECOMMENDED OPERATING CONDITIONS Symbol Item Rating Unit Ta Operating Temperature Range -40 to +105 °C RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS) All of electronic equipment should be designed that the mounted semiconductor devices operate within the recommended operating conditions. The semiconductor devices cannot operate normally over the recommended operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the semiconductor devices may receive serious damage when they continue to operate over the recommended operating conditions.

NO.EA-300-221111 Power Dissipation (HSOP-6J) The power dissipation of the package is dependent on PCB material, layout, and environmental conditions. The following measurement conditions are based on JEDEC STD. 51-7. Measurement Conditions Item Measurement Conditions Environment Mounting on Board (Wind Velocity = 0 m/s) Board Material Glass Cloth Epoxy Plastic (Four-Layer Board) Board Dimensions 76.2 mm × 114.3 mm × 0.8 mm Copper Ratio Outer Layer (First Layer): Less than 95% of 50 mm Square Inner Layers (Second and Third Layers): Approx. 100% of 50 mm Square Outer Layer (Fourth Layer): Approx. 100% of 50 mm Square Through-holes φ 0.3 mm × 28 pcs Measurement Result (Ta = 25°C, Tjmax = 125°C) Item Measurement Result Power Dissipation 2700 mW Thermal Resistance (θja) θja = 37°C/W Thermal Characterization Parameter (ψjt) ψjt = 7°C/W θja: Junction-to-Ambient Thermal Resistance ψjt: Junction-to-Top Thermal Characterization Parameter Power Dissipation vs. Ambient Temperature Measurement Board Pattern 500 1000 1500 2000 2500 3000 0 25 50 75 100 125 Power Dissipation PD (mW) Ambient Temperature (°C) 2700 105

NO.EA-300-221111 Power Dissipation (TO-252-5-P2) The power dissipation of the package is dependent on PCB material, layout, and environmental conditions. The following measurement conditions are based on JEDEC STD. 51-7. Measurement Conditions Item Measurement Conditions Environment Mounting on Board (Wind Velocity = 0 m/s) Board Material Glass Cloth Epoxy Plastic (Four-Layer Board) Board Dimensions 76.2 mm × 114.3 mm × 0.8 mm Copper Ratio Outer Layer (First Layer): Less than 95% of 50 mm Square Inner Layers (Second and Third Layers): Approx. 100% of 50 mm Square Outer Layer (Fourth Layer): Approx. 100% of 50 mm Square Through-holes φ 0.3 mm × 21 pcs Measurement Result (Ta = 25°C, Tjmax = 125°C) Item Measurement Result Power Dissipation 3800 mW Thermal Resistance (θja) θja = 26°C/W Thermal Characterization Parameter (ψjt) ψjt = 7°C/W θja: Junction-to-Ambient Thermal Resistance ψjt: Junction-to-Top Thermal Characterization Parameter Power Dissipation vs. Ambient Temperature Measurement Board Pattern

NO.EA-300-221111

ELECTRICAL CHARACTERISTICS

CIN=1.0μF, COUT=6.8μF, unless otherwise noted. The specification surrounded by are guaranteed by design engeneering at -40°C ≤ Ta ≤ +105°C. R1511xxxxB (T a=25°C) Symbol Item Conditions Min. Typ. Max. Unit VIN Input Voltage 3.5 36 V ISS Supply Current VIN=VSET+1.0V, IOUT=0mA 100 180 µA Istandby Standby Current VIN=36V, VCE=0V 0.1 2.0 µA VOUT Output Voltage VIN=VSET+2.0V IOUT=1mA ∆VOUT /∆IOUT Load Regulation VIN=VSET+2.0V 1mA≤IOUT≤300mA VSET≤5.0V -20 100 mV 5.0V<VSET -20 120 ∆VOUT /∆VIN Line Regulation VSET+0.5V≤VIN≤36V, IOUT=1mA 0.01 0. 02 %/V VDIF Dropout Voltage IOUT=300mA 3.0V≤VSET≤3.1V 0.98 1.5 V 3.1V<VSET≤3.4V 0.94 1.4 3.4V<VSET≤3.8V 0.88 1.3 3.8V<VSET≤4.3V 0.79 1.2 4.3V<VSET≤4.9V 0.71 1.1 4.9V<VSET≤5.7V 0.64 1.0 5.7V<VSET≤6.8V 0.59 0.9 6.8V<VSET≤8.3V 0.54 0.8 8.3V<VSET≤9.0V 0.47 0.7 ∆VOUT /∆Ta Output Voltage Temperature Coefficient VIN=VSET+2.0V, IOUT=1mA −40°C≤Ta≤+105°C ±60 ppm /°C ILIM Output Current Limit VIN=VSET+2.5V 450 mA ISC Short Current Limit VOUT=0V 50 mA RR Ripple Rejection f=1kHz, Ripple=0.5Vpp IOUT=10mA, VIN=VSET+2.0V 65 dB VCEH CE Input Voltage “H” 2.2 36 V VCEL CE Input Voltage “L” 0 1.0 V IPD CE Pull-down Current VCE=5.0V 0.2 0.6 μA VCE=36V 0.5 1.3 TTSD Thermal Shutdown Temparature Junction Temperature 160 °C TTSR Thermal Shutdown Released Temperature Junction Temperature 135 °C All test items listed under Electrical Characteristics are done under the pulse load condition (Tj≈Ta=25ºC) except for Ripple Rejection and Output Voltage Temperature Coefficient.

NO.EA-300-221111 CIN=1.0μF, COUT=6.8μF, VOUT=VFB, unless otherwise noted. The specification surrounded by are guaranteed by design engeneering at -40°C ≤ Ta ≤ +105°C. R1511x001C (Ta=25°C) Symbol Item Conditions Min. Typ. Max. Unit VIN Input Voltage 3.5 36 V ISS Supply Current VIN=4.0V, IOUT=0mA 100 180 µA VOUT Output Voltage VIN=5.0V IOUT=1mA Ta=25°C 2.97 3.03 V ∆VOUT /∆IOUT Load Regulation VIN=5.0V 1mA≤IOUT≤300mA -20 40 mV ∆VOUT /∆VIN Line Regulation VSET+0.5V≤VIN≤36V IOUT=1mA 0.01 0. 02 %/V VDIF Dropout Voltage IOUT=300mA 0.98 1.5 V ∆VOUT /∆Ta Output Voltage Temperature Coefficient VIN=VSET+2.0V, IOUT=1mA −40°C≤Ta≤+105°C ±60 ppm /°C ILIM Output Current Limit VIN= VSET+2.5V 450 mA ISC Short Current Limit VOUT=0V 50 mA RR Ripple Rejection f=1kHz, Ripple=0.5Vpp IOUT=10mA, VIN=VSET+2.0V 65 dB RFB VFB Pin Resistanse 1.0 3.0 MΩ TTSD Thermal Shutdown Temparature Junction Temperature 160 °C TTSR Thermal Shutdown Released Temperature Junction Temperature 135 °C All test items listed under Electrical Characteristics are done under the pulse load condition (Tj≈Ta=25ºC) except for Ripple Rejection and Output Voltage Temperature Coefficient.

NO.EA-300-221111 TYPICAL APPLICATIONS R1511xxxxB Series VDD CE VOUT GND CIN COUT CIN=Ceramic 1.0μF COUT=Ceramic 6.8μF R1511x001C Series VDD VFB VOUT GND CIN COUT CIN=Ceramic 1.0μF COUT=Ceramic 6.8μF R3 RFB NOTES CONCERNING EXTERNAL PARTS Phase Compensation In the R1511x Series, phase compensation is provided to secure stable operation even when the load current is varied. For this purpose, please make sure to use a COUT capacitor. In case of using a tantalum type capacitor and the ESR (Equivalent Series Resistance) value of the capacitor is large, the output might be unstable. Evaluate the circuit including consideration of frequency characteristics. Depending on the capacitor size, manufacturer, and part number, the bias characteristics and temperature characteristics are different. Evaluate the circuit taking actual characteristics into account. PCB Layout and GND Wiring Ensure the VDD and GND lines are sufficiently robust. If their impedance is too high, noise pickup or unstable operation may result. Connect a C IN capacitor with 1.0µF or more value between the V DD and GND pins, and as close as possible to the pins. Likewise, connect a COUT capacitor with suitable values between the VOUT and GND pins, and as close as possible to the pins (Please refer to the Typical Application above). In the case of using HSOP -6J package, please make sure to wire No. 2, No. 3, and No. 5 pins to the GND plane. Also, in the case of using TO -252-5-P2 package, please make sure to wire No. 2 and No. 3 pins to the GND plane. Thermal Shutdown R1511x contains a thermal shutdown circuit, which stops regulator operation if the junction temperature of R1511x becomes higher than 160 ºC (Typ.). Additionally, if the junction temperature after the regulator being stopped decreases to a level below 135 ºC (Typ.), it restarts regulator operation. As a result the operation of the thermal shutdown circuit causes the regulator repeatedly to turn off and on until the causes of overheating are removed. As a consequence a pulse shaped output voltage occurs. Output Voltage Setting Method (R1511x001C) R1511x001C can be adjusted the output voltage up to 12.0V by using the external divider resistors. The output voltage can be calculated by the following equation. V OUT=VFB×(R2+R3)/R3 However, output voltage will be as large as “R2×IFB” by the current flowing through the resistor in the IC. Because IFB = VFB/RFB, “R2×IFB” cause of error is as follows. R 2×IFB=R2×VFB/RFB=VFB×R2/RFB For better accuracy, choosing R2<<R FB reduces this error. R FB of R1511x is approximately min 1.0M Ω (guaranteed by design).

NO.EA-300-221111 Package Dimensions (HSOP-6J) 3.81 123 5.02±0.3 654 (Unit: mm) 0.10 0.12 M 0.605TYP . 0.15±0.1 1.5±0.1 1.67±0.1 0.4±0.1 0.60±0.2 0.2 6.0±0.3 3.9±0.2 +0.10 -0.05

NO.EA-300-221111 Mark Specification (HSOP-6J) : Product Code … Refer to R1511S Series Mark Specification Table  : Lot Number … Alphanumeric Serial Number NOTICE There can be variation in the marking when different AOI (Automated Optical Inspection) equipment is used. In the case of recognizing the marking characteristic with AOI, please contact our sales or distributor before attempting to use AOI.  

NO.EA-300-221111 R1511S Series Mark Specification Table PKG: HSOP-6J R 1511SxxxB Mark Specification Table Product Name  VSET Product Name  VSET R1511S030B S 3 0 B 3.0 V R1511S081B S 8 1 B 8.1 V R1511S031B S 3 1 B 3.1 V R1511S082B S 8 2 B 8.2 V R1511S032B S 3 2 B 3.2 V R1511S083B S 8 3 B 8.3 V R1511S033B S 3 3 B 3.3 V R1511S084B S 8 4 B 8.4 V R1511S034B S 3 4 B 3.4 V R1511S085B S 8 5 B 8.5 V R1511S035B S 3 5 B 3.5 V R1511S086B S 8 6 B 8.6 V R1511S036B S 3 6 B 3.6 V R1511S087B S 8 7 B 8.7 V R1511S037B S 3 7 B 3.7 V R1511S088B S 8 8 B 8.8 V R1511S038B S 3 8 B 3.8 V R1511S089B S 8 9 B 8.9 V R1511S039B S 3 9 B 3.9 V R1511S090B S 9 0 B 9.1 V R1511S040B S 4 0 B 4.0 V R1511S041B S 4 1 B 4.1 V R1511S001C Mark Specification Table R1511S042B S 4 2 B 4.2 V Product Name  VSET R1511S043B S 4 3 B 4.3 V R1511S001C S 0 0 C 3.0 V R1511S044B S 4 4 B 4.4 V R1511S045B S 4 5 B 4.5 V R1511S046B S 4 6 B 4.6 V R1511S047B S 4 7 B 4.7 V R1511S048B S 4 8 B 4.8 V R1511S049B S 4 9 B 4.9 V R1511S050B S 5 0 B 5.0 V R1511S051B S 5 1 B 5.1 V R1511S052B S 5 2 B 5.2 V R1511S053B S 5 3 B 5.3 V R1511S054B S 5 4 B 5.4 V R1511S055B S 5 5 B 5.5 V R1511S056B S 5 6 B 5.6 V R1511S057B S 5 7 B 5.7 V R1511S058B S 5 8 B 5.8 V R1511S059B S 5 9 B 5.9 V R1511S060B S 6 0 B 6.0 V R1511S061B S 6 1 B 6.1 V R1511S062B S 6 2 B 6.2 V R1511S063B S 6 3 B 6.3 V R1511S064B S 6 4 B 6.4 V R1511S065B S 6 5 B 6.5 V R1511S066B S 6 6 B 6.6 V R1511S067B S 6 7 B 6.7 V R1511S068B S 6 8 B 6.8 V R1511S069B S 6 9 B 6.9 V R1511S070B S 6 0 B 7.0 V R1511S071B S 7 1 B 7.1 V R1511S072B S 7 2 B 7.2 V R1511S073B S 7 3 B 7.3 V R1511S074B S 7 4 B 7.4 V R1511S075B S 7 5 B 7.5 V R1511S076B S 7 6 B 7.6 V R1511S077B S 7 7 B 7.7 V R1511S078B S 7 8 B 7.8 V R1511S079B S 7 9 B 7.9 V R1511S080B S 8 0 B 8.0 V

NO.EA-300-221111 Package Dimensions (TO-252-5-P2) (Unit : mm) 0.50±0.10 0.50±0.10 (0°～8°) 1.52 +0.26 -0.13 (0～0.127) S 0.12 M 0.50±0.10 2.30±0.20 (1.00) 0.10 (6.20) 6.60±0.20 5.34±0.20 6.10±0.20 (1.00) 9.90±0.30 1.10±0.20 C0.60 1.27 2.70±0.20 (4.06) (3.56) R0.325 R0.225 (4.19) (1.50) (5.04) *) The tab on the bottom of the package enhances thermal performance and is electrically connected to GND (substrate level). It is recommended that the tab be connected to the ground plane on the board, or otherwise be left floating.

NO.EA-300-221111 Mark Specification (TO-252-5-P2) : Product Code … Refer to R1511J Series Mark Specification Table : Lot Number … Alphanumeric Serial Number NOTICE There can be variation in the marking when different AOI (Automated Optical Inspection) equipment is used. In the case of recognizing the marking characteristic with AOI, please contact our sales or distributor before attempting to use AOI. ①②③④⑤⑥ ⑦⑧ ⑨⑩

NO.EA-300-221111 R1511J Series Mark Specification Table PKG: TO-252-5-P2 R1511JxxxB Mark Specification Table R1511J030B H 1 J 0 3 0 B _ 3.0 V R1511J081B H 1 J 0 8 1 B _ 8.1 V R1511J031B H 1 J 0 3 1 B _ 3.1 V R1511J082B H 1 J 0 8 2 B _ 8.2 V R1511J032B H 1 J 0 3 2 B _ 3.2 V R1511J083B H 1 J 0 8 3 B _ 8.3 V R1511J033B H 1 J 0 3 3 B _ 3.3 V R1511J084B H 1 J 0 8 4 B _ 8.4 V R1511J034B H 1 J 0 3 4 B _ 3.4 V R1511J085B H 1 J 0 8 5 B _ 8.5 V R1511J035B H 1 J 0 3 5 B _ 3.5 V R1511J086B H 1 J 0 8 6 B _ 8.6 V R1511J036B H 1 J 0 3 6 B _ 3.6 V R1511J087B H 1 J 0 8 7 B _ 8.7 V R1511J037B H 1 J 0 3 7 B _ 3.7 V R1511J088B H 1 J 0 8 8 B _ 8.8 V R1511J038B H 1 J 0 3 8 B _ 3.8 V R1511J089B H 1 J 0 8 9 B _ 8.9 V R1511J039B H 1 J 0 3 9 B _ 3.9 V R1511J090B H 1 J 0 9 0 B _ 9.0 V R1511J040B H 1 J 0 4 0 B _ 4.0 V R1511J041B H 1 J 0 4 1 B _ 4.1 V R1511J001C Mark Specification Table R1511J042B H 1 J 0 4 2 B _ 4.2 V Product Name  VSET R1511J043B H 1 J 0 4 3 B _ 4.3 V R1511J001C H 1 J 0 0 1 C _ 3.0 V R1511J044B H 1 J 0 4 4 B _ 4.4 V R1511J045B H 1 J 0 4 5 B _ 4.5 V R1511J046B H 1 J 0 4 6 B _ 4.6 V R1511J047B H 1 J 0 4 7 B _ 4.7 V R1511J048B H 1 J 0 4 8 B _ 4.8 V R1511J049B H 1 J 0 4 9 B _ 4.9 V R1511J050B H 1 J 0 5 0 B _ 5.0 V R1511J051B H 1 J 0 5 1 B _ 5.1 V R1511J052B H 1 J 0 5 2 B _ 5.2 V R1511J053B H 1 J 0 5 3 B _ 5.3 V R1511J054B H 1 J 0 5 4 B _ 5.4 V R1511J055B H 1 J 0 5 5 B _ 5.5 V R1511J056B H 1 J 0 5 6 B _ 5.6 V R1511J057B H 1 J 0 5 7 B _ 5.7 V R1511J058B H 1 J 0 5 8 B _ 5.8 V R1511J059B H 1 J 0 5 9 B _ 5.9 V R1511J060B H 1 J 0 6 0 B _ 6.0 V R1511J061B H 1 J 0 6 1 B _ 6.1 V R1511J062B H 1 J 0 6 2 B _ 6.2 V R1511J063B H 1 J 0 6 3 B _ 6.3 V R1511J064B H 1 J 0 6 4 B _ 6.4 V R1511J065B H 1 J 0 6 5 B _ 6.5 V R1511J066B H 1 J 0 6 6 B _ 6.6 V R1511J067B H 1 J 0 6 7 B _ 6.7 V R1511J068B H 1 J 0 6 8 B _ 6.8 V R1511J069B H 1 J 0 6 9 B _ 6.9 V R1511J070B H 1 J 0 7 0 B _ 7.0 V R1511J071B H 1 J 0 7 1 B _ 7.1 V R1511J072B H 1 J 0 7 2 B _ 7.2 V R1511J073B H 1 J 0 7 3 B _ 7.3 V R1511J074B H 1 J 0 7 4 B _ 7.4 V R1511J075B H 1 J 0 7 5 B _ 7.5 V R1511J076B H 1 J 0 7 6 B _ 7.6 V R1511J077B H 1 J 0 7 7 B _ 7.7 V R1511J078B H 1 J 0 7 8 B _ 7.8 V R1511J079B H 1 J 0 7 9 B _ 7.9 V R1511J080B H 1 J 0 8 0 B _ 8.0 V

NO.EA-300-221111 TEST CIRCUITS. R1511xxxxB Series VDD CE VOUT GND CIN COUT IOUT CIN=Ceramic1.0μF, COUT=Ceramic6.8μF R1511xxxxB Series VDD CE VOUT GND CIN COUT A CIN=Ceramic1.0μF, COUT=Ceramic6.8μF R1511xxxxB Basic Test Circuit R1511xxxxB Test Circuit for Supply Current R1511xxxxB Series VDD CE VOUT GND COUT IOUT COUT=Ceramic6.8μF P. G. R1511xxxxB Series VDD CE VOUT GND CIN COUT IOUT CIN=Ceramic1.0μF, COUT=Ceramic6.8μF P. G. R1511xxxxB Test Circuit for Ripple Rejection R1511xxxxB Test Circuit for CE Start-up and Regulator Input Transient Response R1511xxxxB Series VDD CE VOUT GND CIN COUT CIN=Ceramic1.0μF, COUT=Ceramic6.8μF R1511x001C Series VDD VFB VOUT GND CIN COUT IOUT CIN=Ceramic1.0μF, COUT=Ceramic6.8μF R1511xxxxB Test Circuit for Load Transient Response R1511x001C Basic Test Circuit R1511x001C Series VDD VFB VOUT GND CIN COUT CIN=Ceramic1.0μF, COUT=Ceramic6.8μF A R1511x001C Series VDD VFB VOUT GND R3=10kΩ R2=30kΩ R1511x001C Test Circuit for Supply Current R1511x001C Case of output voltage adjustment by external resistors

NO.EA-300-221111 TYPICAL CHARACTERISTICS (1) Output Voltage Vs. Output Current (Ta=25ºC) R1511x030B R1511x050B R1511x090B R1511x001C 2) Output Voltage Vs. Input Voltage (Ta=25ºC) R1511x030B R1511x050B 0.0 0.5 1.0 2.0 2.5 3.0 3.5 0 100 200 300 400 500 600 Output Current IOUT ( mA ) Output Voltage VOUT (V) VIN=4.5V 5.0V 6.0V 0 100 200 300 400 500 600 Output Current IOUT ( mA ) Output Voltage VOUT (V) VIN=5.5V 6.0V 6.5V 0 100 200 300 400 500 600 Output Current IOUT ( mA ) Output Voltage VOUT (V) VIN=9.5V 10.0V 10.5V 0 100 200 300 400 500 600 Output Current IOUT ( mA ) Output Voltage VOUT (V) R2=30kΩ R3=10kΩ (VOUT=12V) VIN=12.5V 13.0V 13.5V 0.0 0.5 1.0 2.0 2.5 3.0 3.5 Input Voltage VIN (V) Output Voltage VOUT (V) IOUT=1mA 50mA 150mA 300mA 2 3 4 5 6 7 Input Voltage VIN (V) Output Voltage VOUT (V) IOUT=1mA 50mA 150mA 300mA

NO.EA-300-221111 R1511x090B R1511x001C 3) Supply Current Vs. Input Voltage R1511x030B R1511x050B R1511x090B R1511x001C 2 3 4 5 6 7 8 9 10 11 Input Voltage VIN (V) Output Voltage VOUT (V) IOUT=1mA 50mA 150mA 300mA 0.0 0.5 1.0 2.0 2.5 3.0 3.5 Input Voltage VIN (V) Output Voltage VOUT (V) IOUT=1mA 50mA 150mA 300mA 100 120 140 0 6 12 18 24 30 36 Input Voltage VIN (V) Supply Current Iss (μA) Ta=-40°C 25°C 105°C 100 120 140 0 6 12 18 24 30 36 Input Voltage VIN (V) Supply Current Iss (μA) Ta=-40°C 25°C 105°C 100 120 140 0 6 12 18 24 30 36 Input Voltage VIN (V) Supply Current Iss (μA) Ta=-40°C 25°C 105°C 100 120 140 0 6 12 18 24 30 36 Input Voltage VIN (V) Supply Current Iss (μA) Ta=-40°C 25°C 105°C

NO.EA-300-221111 4) Output Voltage Vs. Ambient Temperature R1511x030B R1511x050B R1511x090B R1511x001C 5) Dropout Voltage Vs. Output Current R1511x030B/R1511x001C R1511x050B -40 -25 0 25 50 75 105100 2.940 2.955 2.970 985 3.000 3.015 3.030 3.045 3.060 Ta (°C) Output Voltage VOUT (V) VIN = 5.0V IOUT =1mA -40 -25 0 25 50 75 100 105 4.900 4.925 4.950 975 5.000 5.025 5.050 5.075 5.100 Ta (°C) Output Voltage VOUT (V) VIN = 7.0V IOUT =1mA -40 -25 0 25 50 75 100 105 8.820 8.865 8.910 955 9.000 9.045 9.090 9.135 9.180 Ta (°C) Output Voltage VOUT (V) VIN = 11.0V IOUT =1mA -40 -25 0 25 50 75 105100 11.76 11.82 11.88 11. 12.00 12.06 12.12 12.18 12.24 Ta (°C) Output Voltage VOUT (V) R2=30kΩ R3=10kΩ (VOUT=12V) VIN = 14.0V IOUT =1mA 0.0 0.2 0.4 0.8 1.0 1.2 1.4 0 50 100 150 200 250 300 Output Current IOUT ( mA ) Dropout Voltage VDIF (V) Ta=-40°C 25°C 105°C 0.0 0.1 0.2 0.4 0.5 0.6 0.7 0.8 0.9 0 50 100 150 200 250 300 Output Current IOUT ( mA ) Dropout Voltage VDIF (V) Ta=-40°C 25°C 105°C

NO.EA-300-221111 R1511x090B 6) Dropout Voltage Vs. Setting Voltage (Ta=25ºC) 7) Ripple Rejection Vs. Input Bias Voltage (Ta=25°C, Ripple=0.5Vpp) R 1511x030B/R1511x001C (IOUT=1mA) R1511x030B/R1511x001C (IOUT=100mA) R1511x050B (IOUT=1mA) R1511x050B (IOUT=100mA) 0.0 0.1 0.2 0.4 0.5 0.6 0 50 100 150 200 250 300 Output Current IOUT ( mA ) Dropout Voltage VDIF (V) Ta=-40°C 25°C 105°C 0.0 0.1 0.2 0.4 0.5 0.6 0.7 0.8 0.9 1.0 3 4 5 6 7 8 9 Output Setting Voltage VSET (V) Dropout Voltage VDIF (V) IOUT=1mA 50mA 150mA 300mA 3 4 5 6 7 8 Input Voltage VIN (V) Ripple Rejection Ratio RR (dB) f=100Hz 1kHz 10kHz 100kHz 3 4 5 6 7 8 Input Voltage VIN (V) Ripple Rejection Ratio RR (dB) f=100Hz 1kHz 10kHz 100kHz 5 6 7 8 9 10 Input Voltage VIN (V) Ripple Rejection Ratio RR (dB) f=100Hz 1kHz 10kHz 100kHz 5 6 7 8 9 10 Input Voltage VIN (V) Ripple Rejection Ratio RR (dB) f=100Hz 1kHz 10kHz 100kHz

NO.EA-300-221111 R1511x090B (IOUT=1mA) R1511x090B (IOUT=100mA) 8) Ripple Rejection Vs. Frequency (Ta=25°C, Ripple=0.5Vpp) R1511x030B/R1511x001C R1511x050B R1511x090B 9 10 11 12 13 14 Input Voltage VIN (V) Ripple Rejection Ratio RR (dB) f=100Hz 1kHz 10kHz 100kHz 9 10 11 12 13 14 Input Voltage VIN (V) Ripple Rejection Ratio RR (dB) f=100Hz 1kHz 10kHz 100kHz 0 1 10 100 1000 Frequency (kHz) Ripple Rejection Ratio RR (dB) VIN = 5V IOUT=1mA 10mA 100mA 0 1 10 100 1000 Frequency (kHz) Ripple Rejection Ratio RR (dB) VIN = 7V IOUT=1mA 10mA 100mA 0 1 10 100 1000 Frequency (kHz) Ripple Rejection Ratio RR (dB) VIN = 11V IOUT=1mA 10mA 100mA

NO.EA-300-221111 10) Input Transient Response (Ta=25°C) R1511x030B R1511x050B R1511x090B 10) Load Transient Response (Ta=25°C) R1511x030B R1511x050B 2.7 2.8 2.9 3.1 3.2 3.3 3.4 3.5 -100 0 100 200 300 400 500 time (μs) Output Voltage VOUT (V) Input Voltage VIN (V) Input Voltage tr=tf = 1μ s Output Voltage IOUT=1mA 100mA 4.7 4.8 4.9 5.1 5.2 5.3 5.4 5.5 -100 0 100 200 300 400 500 time (μs) Output Voltage VOUT (V) Input Voltage VIN (V) Output Voltage IOUT=1mA 100mA Input Voltage tr=tf= 1 μs 8.7 8.8 8.9 9.1 9.2 9.3 9.4 9.5 -100 0 100 200 300 400 500 time (μs) Output Voltage VOUT (V) Input Voltage VIN (V) Output Voltage IOUT=1mA 100mA Input Voltage tr=tf= 1 μs 2.8 2.9 3.0 3.2 3.3 3.4 3.5 3.6 -100 0 100 200 300 400 500 time (μs) Output Voltage Vout (V) 100 150 Output Current Iout (mA)Output Voltage 100mA 1mA Vin=5V Output Current tr=tf = 0.5μ s 4.8 4.9 5.0 5.2 5.3 5.4 5.5 5.6 -100 0 100 200 300 400 500 time (μs) Output Voltage Vout (V) 100 150 Output Current Iout (mA) Output Voltage 100mA 1mA Vin=7V Output Current tr=tf = 0.5μ s

NO.EA-300-221111 R1511x090B 11) CE Response (Ta=25°C) R1511x030B (Turn On) R1511x030B (Turn Off) R1511x050B (Turn On) R1511x050B (Turn Off) 8.8 8.9 9.0 9.2 9.3 9.4 9.5 9.6 -100 0 100 200 300 400 500 time (μs) Output Voltage Vout (V) 100 150 Output Current Iout (mA) Output Current tr=tf = 0.5μ s Output Voltage 100mA 1mA Vin=11V -100 0 100 200 300 400 500 600 time (μs) Output Voltage VOUT (V) 100 200 300 400 500 600 700 800 900 1000 1100 Inrush Current Irush (mA) Output Voltage Inrush Current VIN = 5V CE Input Voltage COUT=6.8μF 10μF -1 0 1 2 3 4 5 6 7 8 9 time ( ms ) Output Voltage VOUT (V) CE Input Voltage Vce (V) IOUT=1mA 10mA50mA 150mA CE Input Voltage VIN = 5V Output Voltage -100 0 100 200 300 400 500 600 time (μs) Output Voltage VOUT (V) 100 200 300 400 500 600 700 800 900 1000 1100 Inrush Current Irush (mA) Output Voltage Inrush Current VIN = 7V CE Input Voltage COUT=6.8μF 10μF -1 0 1 2 3 4 5 6 7 8 9 time ( ms ) Output Voltage VOUT (V) CE Input Voltage Vce (V) IOUT=1mA 10mA 50mA 150mA CE Input Voltage VIN = 7V Output Voltage

NO.EA-300-221111 R1511x090B (Turn On) R1511x090B (Turn Off) 12) Start Up Waveform (Ta=25°C) R1511x030B R1511x001C 13) CE Pin Current Vs. CE Input Voltage R1511xxxxB -100 0 100 200 300 400 500 600 time (μs) Output Voltage VOUT (V) 100 200 300 400 500 600 700 800 900 1000 1100 Inrush Current Irush (mA) Output Voltage Inrush Current VIN = 11V CE Input Voltage COUT=6.8μF 10μF -1 0 1 2 3 4 5 6 7 8 9 time ( ms ) Output Voltage VOUT (V) CE Input Voltage Vce (V) IOUT=1mA 10mA 50mA 150mA CE Input Voltage VIN = 11V Output Voltage -100 0 100 200 300 400 500 600 time (μs) Output Voltage VOUT (V) 100 200 300 400 500 600 700 800 900 1000 1100 Inrush Current Irush (mA) Output Voltage Inrush Current VCE = 5V Input Voltage COUT=6.8μF 10μF -100 0 100 200 300 400 500 600 time (μs) Output Voltage VOUT (V) 100 200 300 400 500 600 700 800 900 1000 1100 Inrush Current Irush (mA) Output Voltage Inrush Current Input Voltage COUT=6.8μF 10μF 0.0 0.1 0.2 0.4 0.5 0.6 0 6 12 18 24 30 36 CE Input Voltage VCE (V) CE Current ICE (μA)

NO.EA-300-221111 EFFECTIVE SERIES RESISTANCE (ESR) VS. OUTPUT CURRENT Ceramic type output capacitor is recommended for this series; however, the other output capacitors with low ESR also can be used. As for reference, the below graphs show the relationship between output current (IOUT) and effective series resistance (ESR). The noise level of the output current (IOUT) was measured by the test circuit and is lower than the specified value. R1511xxxxB Series VDD CE VOUT GND CIN COUT IOUT CIN=Ceramic1.0μF, COUT=Ceramic6.8μF ESR R1511x001C Series VDD VFB VOUT GND CIN COUT IOUT CIN=Ceramic1.0μF, COUT=Ceramic6.8μF ESR Measurement Conditions ・ Noise Frequency Range: 10Hz to 1MHz ・ Ambient Temperature: -40ºC to 105ºC ・ Shaded Area: Noise level is lower than the specified value (40μV) ・ Capacitor: CIN=Ceramic 1.0µF, COUT=Ceramic 6.8µF (C4532X7S1H685K) R1511x030B R1511x050B R1511x090B R1511x001C (VOUT=12V) 0.01 0.1 100 0 50 100 150 200 250 300 Output Current IOUT ( mA ) Equivalent Series Resistance ESR (Ω) VIN=3.5V to 36V Ta=-40°C 25°C 105°C 0.01 0.1 100 0 50 100 150 200 250 300 Output Current IOUT ( mA ) Equivalent Series Resistance ESR (Ω) VIN =5V to 36V Ta=-40°C 25°C 105°C 0.01 0.1 100 0 50 100 150 200 250 300 Output Current IOUT ( mA ) Equivalent Series Resistance ESR (Ω) VIN=9V to 36V 25°C 105°C Ta=-40°C 0.01 0.1 100 0 50 100 150 200 250 300 Output Current IOUT ( mA ) Equivalent Series Resistance ESR (Ω) VIN=12V to 36V 25°C 105°C Ta=-40°C

1. T he products and the product specifications described in this document are subject to change or discontinuation of production without notice for reasons such as improvement. Therefore, before deciding to use the products, please refer to our sales representatives for the latest information thereon. 2. The materials in this document may not be copied or otherwise reproduced in whole or in part without the prior written consent of us. 3. This product and any technical information relating thereto are subject to complementary export controls (so- called KNOW controls) under the Foreign Exchange and Foreign Trade Law, and related politics ministerial ordinance of the law. (Note that the complementary export controls are inapplicable to any application-specific products, except rockets and pilotless aircraft, that are insusceptible to design or program changes.) Accordingly, when exporting or carrying abroad this product, follow the Foreign Exchange and Foreign Trade Control Law and its related regulations with respect to the complementary export controls. 4. The technical information described in this document shows typical characteristics and example application circuits for the products. The release of such information is not to be construed as a warranty of or a grant of license under our or any third party's intellectual property rights or any other rights. 5. The products listed in this document are intended and designed for use as general electronic components in standard applications (office equipment, telecommunication equipment, measuring instruments, consumer electronic products, amusement equipment etc.). Those customers intending to use a product in an application requiring extreme quality and reliability, for example, in a highly specific application where the failure or misoperation of the product could result in human injury or death should first contact us.

• Aerospace Equipment
• Equipment Used in the Deep Sea
• Power Generator Control Equipment (nuclear, steam, hydraulic, etc.)
• Life Maintenance Medical Equipment
• Fire Alarms / Intruder Detectors
• Vehicle Control Equipment (automotive, airplane, railroad, ship, etc.)
• Various Safety Devices
• Traffic control system
• Combustion equipment In case your company desires to use this product for any applications other than general electronic equipment mentioned above, make sure to contact our company in advance. Note that the important requirements mentioned in this section are not applicable to cases where operation requirements such as application conditions are confirmed by our company in writing after consultation with your company. 6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor products are likely to fail with certain probability. In order to prevent any injury to persons or damages to property resulting from such failure, customers should be careful enough to incorporate safety measures in their design, such as redundancy feature, fire containment feature and fail-safe feature. We do not assume any liability or responsibility for any loss or damage arising from misuse or inappropriate use of the products. 7. The products have been designed and tested to function within controlled environmental conditions. Do not use products under conditions that deviate from methods or applications specified in this datasheet. Failure to employ the products in the proper applications can lead to deterioration, destruction or failure of the products. We shall not be responsible for any bodily injury, fires or accident, property damage or any consequential damages resulting from misuse or misapplication of the products. 8. Quality Warranty 8-1. Quality Warranty Period In the case of a product purchased through an authorized distributor or directly from us, the warranty period for this product shall be one (1) year after delivery to your company. For defective products that occurred during this period, we will take the quality warranty measures described in section 8-2. However, if there is an agreement on the warranty period in the basic transaction agreement, quality assurance agreement, delivery specifications, etc., it shall be followed. 8-2. Quality Warranty Remedies When it has been proved defective due to manufacturing factors as a result of defect analysis by us, we will either deliver a substitute for the defective product or refund the purchase price of the defective product. Note that such delivery or refund is sole and exclusive remedies to your company for the defective product. 8-3. Remedies after Quality Warranty Period With respect to any defect of this product found after the quality warranty period, the defect will be analyzed by us. On the basis of the defect analysis results, the scope and amounts of damage shall be determined by mutual agreement of both parties. Then we will deal with upper limit in Section 8-2. This provision is not intended to limit any legal rights of your company. 9. Anti-radiation design is not implemented in the products described in this document. 10. The X-ray exposure can influence functions and characteristics of the products. Confirm the product functions and characteristics in the evaluation stage. 11. WLCSP products should be used in light shielded environments. The light exposure can influence functions and characteristics of the products under operation or storage. 12. Warning for handling Gallium and Arsenic (GaAs) products (Applying to GaAs MMIC, Photo Reflector). These products use Gallium (Ga) and Arsenic (As) which are specified as poisonous chemicals by law. For the prevention of a hazard, do not burn, destroy, or process chemically to make them as gas or power. When the product is disposed of, please follow the related regulation and do not mix this with general industrial waste or household waste. 13. Please contact our sales representatives should you have any questions or comments concerning the products or the technical information. Official website https://www.nisshinbo-microdevices.co.jp/en/ Purchase information https://www.nisshinbo-microdevices.co.jp/en/buy/