CGY52 SIEMENS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Siemens Aktiengesellschaft pg. 1/4 12.02.96 HL EH PD 21 D a t a s h e e t * Two stages monolithic microwave IC (MMIC- Amplifier) *All gold metallisation *Chip fully passivated *Operating voltage range: 2.7 to 5 V *50 Ω input / output ESD: Electrostatic discharge sensitive device, observe handling precautions! Type Marking Ordering code (taped) Package 1) CGY 52 CGY52 Q68000-A8615 MW-7 Maximum ratings Symbol Unit Drain voltage VD 6V Channel temperature TCh 150 °C Storage temperature range Tstg -55...+150 °C Total power dissipation (TS < 55°C) 2) 3) Ptot 1000 mW Thermal resistance Channel-soldering point (GND) 2) R thChS < 95 K/W Junction-ambient 4) R thJA < 175 K/W 1) Dimensions see chapter Package Outlines 2) TS is measured on the source 2 lead at the soldering point of the pcb. 3) Please care for sufficient heat dissipation on the pcb! 4) Package mounted on alumina 15mm x16.7 mm x0.7 mm
Siemens Aktiengesellschaft pg. 2/4 12.02.96 HL EH PD 21
Electrical characteristics
TA = 25°C V D = 4.5 V RS = RL = 50 Ω unless otherwise specified Characteristics Symbol min typ max Unit Drain current ID - 160 220 mA Power Gain f = 200 MHz f = 900 MHz f = 1800 MHz G 13 14.5 12.5 15.5 13.5 dB Gain flatness f = 200 MHz to 1800 MHz ΔG -34 d B Noise figure f = 900 MHz to 1800 MHz F - 4.8 - dB Input return loss f = 200 MHz to 300 MHz f = 300 MHz to 1800 MHz f = 200 MHz f = 900 MHz f = 1800 MHz RL in 6.5 7.5 7.5 8.5 7.5 12.5 dB Output return loss f = 200 MHz to 1800 MHz f = 200 MHz f = 900 MHz f = 1800 MHz RL out 9.5 10.5 10.5 12.5 11.5 dB Third order input intercept point two-tone intermodulation test f1 = 806 MHz, f2 = 810 MHz P = = 10 dBm (both carriers) IP3 - 32 - dBm 1dB gain compression f = 200 MHz to 1800 MHz P-1dB -1 9- dBm
Siemens Aktiengesellschaft pg. 3/4 12.02.96 HL EH PD 21 Typical S-Parameters VD = 4.5 V, VG = 0 V, Zo = 50Ω f/GHz S11 S21 S12 S22 MAG ANG MAG ANG MAG ANG MAG ANG CGY52
50 Ohm Microstripline
10Ω 40 nH L = 100 nH C = 1nF VG *) L, C are optional, only needed when gain control via VG is used
Siemens Aktiengesellschaft pg. 4/4 12.02.96 HL EH PD 21 Total Power Dissipation Ptot = f ( TS; TA ) 0 50 100 150 AS totP TT; [ °C ] [ W ] AT ST 0.2 0.4 0.6 0.8 1.0 Terminal identification: 1 n.c.
2 Interstage
4 n.c.