Q60-5S

Q01-5 XPPOWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 9

Technical content

Features

• Output voltages from 100VDC to 10,000VDC
• Output proportional to input
• 0.7VDC turn-on voltage
• Wide operating temperature range
• Short circuit protection
• Low ripple <1%
• 500VDC input to output isolation
• No minimum load
• 3 year warranty Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage 0.7 5, 12, 15, 24 VDC See Models and Ratings table Input Current 400 mA See Models and Ratings table Control Voltage Input (optional) Analog Control Voltage adjusts output from 0 to 100%, not to exceed Input Voltage, see Application Notes Typical Applications
• Avalanche Photo Diodes
• Photo Multiplier Tubes
• Piezo Devices
• Sustaining Ion Pumps
• Electrophoresis
• Igniters
• Capacitor Charging CONVECTION COOLED Q01 - Q50: Q60 - Q80: Dimensions

Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 10,000 VDC See Models and Ratings table Output Current 5 mA See Models and Ratings table Output Voltage Tolerance ±10 % At Max Vout, Full Load, measured from Pin 3 to Pin 4 Minimum Load No minimum load required Regulation Unregulated, output is proportional to input. See Application Notes Short Circuit Protection 1 minute Ripple and Noise 0.1 1 % See Models and Ratings table Characteristic Minimum Typical Maximum Units Notes & Conditions Isolation: Input to Output 500 V < ±500VDC Bias on Output Return Leakage Current 250 nA Switching Frequency 75 500 kHz Construction Solid vacuum encapsulation, UL 94 V-0 rated. Mean Time Between Failure 3 Mhrs Per Bellcore TR 332 General Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature (case) -25 +70 °C Q01 to Q20, standard operating temperature Operating Temperature (case) -55 +75 °C Q01 to Q20, extended operating temperature Operating Temperature (case) -25 +60 °C Q25 to Q50, standard operating temperature Operating Temperature (case) -55 +70 °C Q25 to Q50, extended operating temperature Operating Temperature (case) -10 +60 °C Q60 to Q101, standard operating temperature Storage Temperature -55 +105 °C Q01 to Q50 Storage Temperature -20 +105 °C Q60 to Q101 Cooling Natural convection Humidity 95 %RH Non-condensing Notes: 1. Maximum output current is available at maximum rated output voltage, and derates linearly as input voltage is decreased. 2. Output Voltage is load dependent. Under light or no-load conditions, reduce the Input Voltage so maximum rated Output Voltage is not exceeded. 3. Specifications are after 30 minute warm-up, full-load at 25°C, unless otherwise noted. 4. Proper thermal management techniques are required to maintain safe case temperature at maximum power output. 5. See page 9 for connection diagrams. 6. All orderable part numbers are listed on the data sheet.

Specifications subject to change without notice. 3 Models & Ratings Model Number Output Input Output Voltage(2) Output Current(1) Ripple Polarity(5) Input Voltage Input Current, No Load Input Current, Full Load Q01-5 0 to 100V 5.00mA <1.0% Reversible 5V <100mA <250mA Q01-5C 0 to 100V 5.00mA <1.0% Reversible 5V <100mA <250mA Q01CT-5 0 to ±50V 5.00mA <1.0% Dual 5V <100mA <250mA Q01-12 0 to 100V 5.00mA <1.0% Reversible 12V <40mA <100mA Q01-12CT 0 to 100V 5.00mA <1.0% Reversible 12V <40mA <100mA Q01-12S 0 to 100V 5.00mA <1.0% Reversible 12V <40mA <100mA Q01CT-12TS 0 to ±50V 5.00mA <1.0% Dual 12V <40mA <100mA Q01-24 0 to 100V 5.00mA <1.0% Reversible 24V <20mA <50mA Q015-5 0 to 150V 3.33mA <0.50% Reversible 5V <100mA <250mA Q015-5TS 0 to 150V 3.33mA <0.50% Reversible 5V <100mA <250mA Q015-12CTRS 0 to 150V 3.33mA <0.50% Reversible 12V <40mA <100mA Q015-12C 0 to 150V 3.33mA <0.50% Reversible 12V <40mA <100mA Q02-5 0 to 200V 2.50mA <0.25% Reversible 5V <100mA <250mA Q02-5CS 0 to 200V 2.50mA <0.25% Reversible 5V <100mA <250mA Q02-5CTS 0 to 200V 2.50mA <0.25% Reversible 5V <100mA <250mA Q02-5TR 0 to 200V 2.50mA <0.25% Reversible 5V <100mA <250mA Q02-12 0 to 200V 2.50mA <0.25% Reversible 12V <40mA <100mA Q02-12CTS 0 to 200V 2.50mA <0.25% Reversible 12V <40mA <100mA Q02-24 0 to 200V 2.50mA <0.25% Reversible 24V <20mA <50mA Q02CT-24R 0 to ±100V 2.50mA <0.25% Dual 24V <20mA <50mA Q025-5 0 to 250V 2.00mA <0.25% Reversible 5V <100mA <250mA Q025-5C 0 to 250V 2.00mA <0.25% Reversible 5V <100mA <250mA Q025-5RS 0 to 250V 2.00mA <0.25% Reversible 5V <100mA <250mA Q025-12 0 to 250V 2.00mA <0.25% Reversible 12V <40mA <100mA Q03-5 0 to 300V 1.67mA <0.25% Reversible 5V <100mA <250mA Q03-12 0 to 300V 1.67mA <0.25% Reversible 12V <40mA <100mA Q04-5 0 to 400V 1.25mA <0.10% Reversible 5V <100mA <250mA Q04-5RS 0 to 400V 1.25mA <0.10% Reversible 5V <100mA <250mA Q04CT-5 0 to ±200V 1.25mA <0.10% Dual 5V <100mA <250mA Q04-12 0 to 400V 1.25mA <0.10% Reversible 12V <40mA <100mA Q04CT-12 0 to ±200V 1.25mA <0.10% Dual 12V <40mA <100mA Q04-24 0 to 400V 1.25mA <0.10% Reversible 24V <20mA <50mA Q04-24TR 0 to 400V 1.25mA <0.10% Reversible 24V <20mA <50mA Q045-12 0 to 450V 1.11mA <0.15% Reversible 12V <40mA <100mA Q05-5 0 to 500V 1.00mA <0.15% Reversible 5V <100mA <250mA Safety Approvals Safety Agency Standard Notes & Conditions UL IEC/UL/CSA/EN 62368 CE CE Directive, RoHs and LVD Where applicable RoHS RoHS 2 and 3 Directive (2011/65/EU) Where applicable

Output Voltage(2) Output Current(1) Ripple Polarity(5) Input Voltage Input Current, No Load Input Current, Full Load Q05-5C 0 to 500V 1.00mA <0.15% Reversible 5V <100mA <250mA Q05-5CTRS 0 to 500V 1.00mA <0.15% Reversible 5V <100mA <250mA Q05-5RS 0 to 500V 1.00mA <0.15% Reversible 5V <100mA <250mA Q05-12 0 to 500V 1.00mA <0.15% Reversible 12V <40mA <100mA Q05-12T 0 to 500V 1.00mA <0.15% Reversible 12V <40mA <100mA Q05-15 0 to 500V 1.00mA <0.15% Reversible 15V <32mA <80mA Q05-24 0 to 500V 1.00mA <0.15% Reversible 24V <20mA <50mA Q05-24CRS 0 to 500V 1.00mA <0.15% Reversible 24V <20mA <50mA Q05-24CTS 0 to 500V 1.00mA <0.15% Reversible 24V <20mA <50mA Q06-5 0 to 600V 833μA <0.10% Reversible 5V <100mA <250mA Q06-12 0 to 600V 833μA <0.15% Reversible 12V <40mA <100mA Q06-15 0 to 600V 833μA <0.15% Reversible 15V <32mA <80mA Q06-24 0 to 600V 833μA <0.15% Reversible 24V <20mA <50mA Q07-5 0 to 700V 714μA <0.25% Reversible 5V <100mA <250mA Q07-12 0 to 700V 714μA <0.25% Reversible 12V <40mA <100mA Q07-15 0 to 700V 714μA <0.25% Reversible 15V <32mA <80mA Q08-24 0 to 800V 625μA <0.30% Reversible 24V <20mA <50mA Q09-12 0 to 900V 556μA <0.25% Reversible 12V <40mA <100mA Q09-12C 0 to 900V 556μA <0.25% Reversible 12V <40mA <100mA Q09-12T 0 to 900V 556μA <0.25% Reversible 12V <40mA <100mA Q09CT-12 0 to ±450V 556μA <0.25% Dual 12V <40mA <100mA Q09-24R 0 to 900V 556μA <0.25% Reversible 24V <20mA <50mA Q10-5 0 to +1000V 500μA <0.25% Positive 5V <100mA <250mA Q10-5RS 0 to +1000V 500μA <0.25% Positive 5V <100mA <250mA Q10-5CTS 0 to +1000V 500μA <0.25% Positive 5V <100mA <250mA Q10-5TS 0 to +1000V 500μA <0.25% Positive 5V <100mA <250mA Q10N-5 0 to -1000V 500μA <0.25% Negative 5V <100mA <250mA Q10N-5C 0 to -1000V 500μA <0.25% Negative 5V <100mA <250mA Q10N-5CS 0 to -1000V 500μA <0.25% Negative 5V <100mA <250mA Q10N-5S 0 to -1000V 500μA <0.25% Negative 5V <100mA <250mA Q10-12 0 to +1000V 500μA <0.25% Positive 12V <40mA <100mA Q10-12CTS 0 to +1000V 500μA <0.25% Positive 12V <40mA <100mA Q10N-12 0 to -1000V 500μA <0.25% Negative 12V <40mA <100mA Q10-24R 0 to +1000V 500μA <0.25% Positive 24V <20mA <50mA Q12-5 0 to +1200V 417μA <0.25% Positive 5V <100mA <250mA Q12-5R 0 to +1200V 417μA <0.25% Positive 5V <100mA <250mA Q12-5RS 0 to +1200V 417μA <0.25% Positive 5V <100mA <250mA Q12-5TS 0 to +1200V 417μA <0.25% Positive 5V <100mA <250mA Q12N-5 0 to -1200V 417μA <0.25% Negative 5V <100mA <250mA Q12N-5RS 0 to -1200V 417μA <0.25% Negative 5V <100mA <250mA Q12N-5TS 0 to -1200V 417μA <0.25% Negative 5V <100mA <250mA Q12-12 0 to +1200V 417μA <0.25% Positive 12V <40mA <100mA Q12N-12 0 to -1200V 417μA <0.25% Negative 12V <40mA <100mA Q12N-15 0 to -1200V 417μA <0.25% Negative 15V <32mA <80mA Models & Ratings DC-HVDC CONVERTERQ Series

Models & Ratings Model Number Output Input Output Voltage(2) Output Current(1) Ripple Polarity(5) Input Voltage Input Current, No Load Input Current, Full Load Q12N-24C 0 to -1200V 417μA <0.25% Negative 24V <20mA <50mA Q15-5 0 to +1500V 333μA <0.25% Positive 5V <100mA <250mA Q15-5S 0 to +1500V 333μA <0.25% Positive 5V <100mA <250mA Q15N-5 0 to -1500V 333μA <0.25% Negative 5V <100mA <250mA Q15N-5S 0 to -1500V 333μA <0.25% Negative 5V <100mA <250mA Q15N-5T 0 to -1500V 333μA <0.25% Negative 5V <100mA <250mA Q15-12 0 to +1500V 333μA <0.25% Positive 12V <40mA <100mA Q15-12C 0 to +1500V 333μA <0.25% Positive 12V <40mA <100mA Q15-12S 0 to +1500V 333μA <0.25% Positive 12V <40mA <100mA Q15-12T 0 to +1500V 333μA <0.25% Positive 12V <40mA <100mA Q15-12TS 0 to +1500V 333μA <0.25% Positive 12 V <40mA <100mA Q15N-12C 0 to -1500V 333μA <0.25% Negative 12V <40mA <100mA Q15-24 0 to +1500V 333μA <0.25% Positive 24V <20mA <50mA Q15N-24 0 to -1500V 333μA <0.25% Negative 24V <20mA <50mA Q20-5 0 to +2000V 250μA <0.25% Positive 5V <100mA <250mA Q20-5RS 0 to +2000V 250μA <0.25% Positive 5V <100mA <250mA Q20-5TR 0 to +2000V 250μA <0.25% Positive 5V <100mA <250mA Q20N-5 0 to -2000V 250μA <0.25% Negative 5V <100mA <250mA Q20-12 0 to +2000V 250μA <0.25% Positive 12V <40mA <100mA Q20N-12 0 to -2000V 250μA <0.25% Negative 12V <40mA <100mA Q20-24 0 to +2000V 250μA <0.25% Positive 24V <20mA <50mA Q25-5 0 to +2500V 200μA <0.50% Positive 5V <250mA <400mA Q25-5T 0 to +2500V 200μA <0.50% Positive 5V <250mA <400mA Q25N-5TR 0 to -2500V 200μA <0.50% Negative 5V <250mA <400mA Q25-12TR 0 to +2500V 200μA <0.50% Positive 12V <100mA <250mA Q25-24 0 to +2500V 200μA <0.50% Positive 24V <35mA <75mA Q30-5 0 to +3000V 167μA <0.50% Positive 5V <250mA <400mA Q30N-5 0 to -3000V 167μA <0.50% Negative 5V <250mA <400mA Q30-12 0 to +3000V 167μA <0.50% Positive 12V <100mA <250mA Q30N-12 0 to -3000V 167μA <0.50% Negative 12V <100mA <250mA Q30-24R 0 to +3000V 167μA <0.50% Positive 24V <35mA <75mA Q30N-24R 0 to -3000V 167μA <0.50% Negative 24V <35mA <75mA Q40-5 0 to +4000V 125μA <0.50% Positive 5V <250mA <400mA Q40N-5 0 to -4000V 125μA <0.50% Negative 5V <250mA <400mA Q40N-5T 0 to -4000V 125μA <0.50% Negative 5V <250mA <400mA Q40-12 0 to +4000V 125μA <0.50% Positive 12V <100mA <250mA Q50-5 0 to +5000V 100μA <0.50% Positive 5V <250mA <400mA Q50-5C 0 to +5000V 100μA <0.50% Positive 5V <250mA <400mA Q50-5CTS 0 to +5000V 100μA <0.50% Positive 5V <250mA <400mA Q50N-5 0 to -5000V 100μA <0.50% Negative 5V <250mA <400mA Q50N-5T 0 to -5000V 100μA <0.50% Negative 5V <250mA <400mA Q60-5 0 to +6000V 83.3μA <1.0% Positive 5V <175mA <250mA Q60-5S 0 to +6000V 83.3μA <1.0% Positive 5V <175mA <250mA Q60N-5 0 to -6000V 83.3μA <1.0% Negative 5V <175mA <250mA DC-HVDC CONVERTERQ Series Specifications subject to change without notice. 5

CT- Center T ap, Dual Output -S External Copper Shield -C Control Pin -R RoHS Designator for Legacy Model -T Extended Operating T emperature Option Codes Models & Ratings Model Number Output Input Output Voltage(2) Output Current(1) Ripple Polarity(5) Input Voltage Input Current, No Load Input Current, Full Load Q80-5 0 to +8000V 62.5μA <1.0% Positive 5V <175mA <250mA Q101-5 0 to +10,000V 50.0μA <1.0% Positive 5V <175mA <250mA Q101N-5 0 to -10,000V 50.0μA <1.0% Negative 5V <175mA <250mA Q101N-5RS 0 to -10,000V 50.0μA <1.0% Negative 5V <175mA <250mA Copper Shield Placement Center Tap (Option) OSCILLATOR RECTIFIER & MULTIPLIER (-) IN 1 2 3 Center Tap (Option) HV RETURN HV OUTPUT High Voltage Transformer Control (Option) Block Diagram

Specifications subject to change without notice. Notes: 1. All dimensions are in inches (mm) 2. Weight: Q01-Q50: 0.15oz (4.25g). 3. Tolerance: X.XX±0.02 (0.51) 4. Pin Tolerance: ±0.005 (0.127) 0.50 (12.70) Ø 0.025 (.64) ALL PINS 0.200 (5.08) MIN 0.50 (12.70) 0.50 (12.70) 0.10 (2.54) 0.400 (10.16) 0.350 (8.89) Ø 0.065 (1.65) 0.05 (1.27) 0.150 (3.81) 1 3 RECOMMENDED PCB LAYOUT Ø 0.043 (1.09) & 0.25 (6.35) Q01 to Q20 TOP VIEW 0.300 (7.62) OPTIONAL* 0.200 (5.08) TOP VIEW FRONT VIEW MODEL: XXXXXXXXX MFG CODE: XXXXXXXXXXX All places* Tab Loca/g2462on for op/g2462onal copper shields 0.20 (5.1) SQ. Recommended hole and pad size No components in this area 0.54 (13.7) SQ. Q01-Q20 PCB Layout Pin Q01-Q09 Q10-Q20 Q25-Q50

1 Input (-) Input (-) Input (-)

2 Input (+) Input (+) Input (+)

3 Output (+) HV Output HV Output

4 Output (-) HV Return HV Return

5* Center T ap 6* Control Pin *Pins 5 & 6 are optional Q25-Q50 0.50 (12.70) Ø 0.016 (.41) ALL PINS 0.200 (5.08) MIN 0.50 (12.70) 0.50 (12.70) 0.10 (2.54) 0.400 (10.16) 0.370 (9.40) Ø 0.042 (1.07) All places* Tab Loca/g2462on for op/g2462onal copper shields 0.20 (5.1) SQ. 0.05 (1.27) 0.150 (3.81) 1 3 RECOMMENDED PCB LAYOUT Recommended Ø 0.028 (.71) & hole and pad size 0.25 (6.35) Q25 to Q50 TOP VIEW No components in this area 0.54 (13.7) SQ. 6*0.300 (7.62) Op/g2462onal* TOP VIEW FRONT VIEW MODEL: XXXXXXXXX MFG CODE: XXXXXXXXXXX PCB Layout

0.680 (17.27) 0.85 (21.59) 0.085 (2.16) 0.43 (10.92) 0.680 (17.27) 0.085 (2.16) 0.43 (10.92) 0.85 (21.59) OUTPUT LEADS #22 AWG 15KV >8"(20.3cm) INPUT LEADS #22 AWG >8"(20.3cm) #4-40 NYLON MOUNTING STUD WITH NUT 0.85 (21.59) 0.33 +0.03/-0.06 (8.38 +0.76/-1.52) HIGH VOLTAGE WARNING MODEL: MFG CODE: XXXXXXX XXXXXXXXX TOP VIEW SIDE VIEW BOTTOM VIEW Mechanical Details Notes: 1. All dimensions are in inches (mm) 2. Weight: Q01-Q50: 0.15oz (4.25g). 3. Tolerance: X.XX±0.02 (0.51) 4. Pin Tolerance: ±0.005 (0.127) Wire Color Function

1 Red Input (+)

2 Black Input (-)

3 Brown HV Output

4 Violet HV Return

Typical HV Output vs. Control Voltage Typical Output vs. Input Voltage Typical HV Output vs. Control Voltage 100 150 02 04 06 08 01 00 % Control Voltage NOTE: Vin held at maximum % HV Output Full Load Output No Load Output (Q) Safe Opera/g2462ng Limit Typical Input Vs. Output Voltage 100 01 02 03 04 05 06 07 08 09 01 00 % Input Voltage NOTE: Control Pin /g2462ed to Vin Pin % Output Voltage Loaded No Load Typical HV Output vs. Control Voltage 100 150 02 04 06 08 01 00 % Control Voltage NOTE: Vin held at maximum % HV Output Full Load Output No Load Output (Q) Safe Opera/g2462ng Limit Typical Input Vs. Output Voltage 100 01 02 03 04 05 06 07 08 09 01 00 % Input Voltage NOTE: Control Pin /g2462ed to Vin Pin % Output Voltage Loaded No Load *For more details, our website has an Application Note - Design Considerations for the Q Series 8 DC-HVDC CONVERTERQ Series

906 Apr 2023

+Vin +Vout -Vout-Vin +Vin -Vin +Vin +Vout -Vin -Vout4 +Vin HV OUTPUT -Vin

4 HVRTN

Q01CT-Q09CT - dual output Q10-Q101 - output is positive or negative by model number +Vin +Vout -Vout-Vin +Vin -Vin +Vin +Vout -Vin -Vout4 +Vin HV OUTPUT -Vin Q01-Q09 - negative output for reversible models +Vin +Vout -Vout-Vin +Vin -Vin +Vin +Vout -Vin -Vout4 +Vin HV OUTPUT -Vin Q01-Q09 - positive output for reversible models +Vin +Vout -Vout-Vin +Vin -Vin +Vin +Vout -Vin -Vout4 +Vin HV OUTPUT -Vin