Q4008RH356

E71639 LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.

8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs

Lxx08xx & Qxx08xx & Qxx08xHx Series Lxx08xx & Qxx08xx & Qxx08xHx Series Main Features

Description

8 Amp bi-directional solid state switch series is designed

for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type devices guarantee gate control in Quadrants I & IV needed for digital control circuitry. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Symbol Value Unit IT(RMS) 8 A VDRM/VRRM 400 to 1000 V IGT (Q1) 5 to 50 mA Features & Benefits

• RoHS compliant
• Glass – passivated junctions
• Voltage capability up to 1000 V
• Surge capability up to 100 A
• Electrically isolated “L-Package” is UL recognized for 2500Vrms
• Solid-state switching eliminates arcing or contact bounce that create voltage transients
• No contacts to wear out from reaction of switching events
• Restricted (or limited) RFI generation, depending on activation point of sine wave
• Requires only a small gate activation pulse in each half-cycle

Applications

Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Schematic Symbol MT2 MT1 G Agency Approval Agency Agency File Number ® L Package: E71639

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Absolute Maximum Ratings — Sensitive T riac (4 Quadrants) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) Lxx08Ly TC = 80°C 8 A Lxx08Ry / Lxx08Vy / Lxx08Dy TC = 85°C ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 50 Hz t = 20 ms 65 A f = 60 Hz t = 16.7 ms 85 I2t I2t Value for fusing tp = 8.3 ms 26.5 A2s di/dt Critical rate of rise of on-state current IG = 50mA with 0.1µs rise time f = 120 Hz TJ = 110°C 70 A/μs IGTM Peak gate trigger current tp ≤ 10 μs TJ = 110°C 1. 6 A PG(AV) Average gate power dissipation TJ = 110°C 0.4 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 110 °C Note: xx = voltage, y = sensitivity Absolute Maximum Ratings — Standard T riac Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) Qxx08Ry / Qxx08Ny TC = 95°C 8 A Qxx08Ly TC = 90°C ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 50 Hz t = 20 ms 83 A f = 60 Hz t = 16.7 ms 100 I2t I2t Value for fusing tp = 8.3 ms 41 A2s di/dt Critical rate of rise of on-state current IG = 200mA with ≤ 0.1µs rise time f = 120 Hz TJ = 125°C 70 A/μs IGTM Peak gate trigger current tp ≤ 10 μs; IGT ≤ TGTM TJ = 125°C 1. 8 A PG(AV) Average gate power dissipation TJ = 125°C 0.5 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C Note: xx = voltage, y = sensitivity

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Absolute Maximum Ratings — Alternistor (3 Quadrants) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) Qxx08LHy TC = 90°C

8 AQxx08RHy / Qxx08NHy

Qxx08VHy / Qxx08DHy TC = 95°C ITSM Non repetitive surge peak on-state current (full cycle, TJ initial = 25°C) f = 50 Hz t = 20 ms Qxx08VHy / Qxx08DHy 80 A Qxx08LHy / Qxx08RHy / Qxx08NHy f = 60 Hz t = 16.7 ms Qxx08VHy / Qxx08DHy 85 Qxx08LHy / Qxx08RHy / Qxx08NHy 100 I2t I2t Value for fusing tp = 8.3 ms Qxx08VHy / Qxx08DHy 30 A2sQxx08LHy / Qxx08RHy / Qxx08NHy di/dt Critical rate of rise of on-state current f = 120 Hz TJ = 125°C 70 A/μs IGTM Peak gate trigger current tP ≤ 10 μs; IGT ≤ IGTM TJ = 125°C Qxx08VHy / Qxx08DHy 1. 6 AQxx08LHy / Qxx08RHy / Qxx08NHy 2.0 PG(AV) Average gate power dissipation TJ = 125°C IGT = 10mA Qxx08VHy / Qxx08DHy 0.4 W IGT = 35mA Qxx08LHy / Qxx08RHy / Qxx08NHy 0.5 Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C Note: xx = voltage, y = sensitivity Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive T riac (4 Quadrants) Symbol Test Conditions Quadrant Lxx08x6 Lxx08x8 Unit IGT VD = 12V RL = 60 Ω I – II – III IV MAX. 5 20 mA VGT ALL MAX. 1. 3 V VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C ALL MIN. 0.2 V IH IT = 100mA MAX. 10 20 mA dv/dt VD = VDRM Gate Open TJ = 100°C 400V TYP . 30 40 V/μs 600V 20 30 (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 110°C TYP . 2 2 V/μs tgt IG = 100mA PW = 15µs IT = 11 .3 A(pk) TYP . 3.0 3.2 μs Note: xx = voltage, x = package, y = sensitivity

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard T riac Symbol Test Conditions Quadrant Qxx08x4 Qxx08x5 Unit IGT VD = 12V RL = 60 Ω I – II – III IV MAX. TYP . 75 mA V GT I – II – III MAX. 1. 3 V VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C ALL MIN. 0.2 V IH IT = 200mA MAX. 50 50 mA dv/dt VD = VDRM Gate Open TJ = 125°C 400V MIN. 150 V/μs 600V 125 800V 100 1000V 80 (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 125°C TYP . 4 4 V/μs tgt IG = 100mA PW = 15µs IT = 11 .3 A(pk) TYP . 3.0 3.0 μs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor T riac (3 Quadrants) Symbol Test Conditions Quadrant Qxx08xH3 Qxx08xH4 Unit IGT VD = 12V RL = 60 Ω I – II – III MAX. 10 35 mA VGT I – II – III MAX. 1. 3 V VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C I – II – III MIN. 0.2 V IH IT = 100mA MAX. 15 35 mA dv/dt VD = VDRM Gate Open TJ = 125°C Qxx08LHy / Qxx08RHy / Qxx08NHy MIN. 400V 75 400 V/μs 600V 50 300 800V 200 1000V 100 Qxx08VHy / Qxx08DHy 400V 75 450 600V 50 350 800V 250 1000V 150 (dv/dt)c (di/dt)c = 4.3 A/ms TJ = 125°C MIN. 20 25 V/μs tgt IG = 100mA PW = 15µs IT = 11 .3 A(pk) TYP . 4.0 4.0 μs Note : xx = voltage, x = package, y = sensitivity

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Static Characteristics Symbol Test Conditions Value Unit VTM ITM = 11 .3A tp = 380 µs MAX. 1 .60 V IDRM IRRM VDRM = VRRM Lxx08xy TJ = 25°C 400 - 600V MAX. 20 μA TJ = 110°C 400 - 600V 0.5 mA Qxx08xy TJ = 25°C 400 - 1000V 50 μA TJ = 125°C 400 - 800V 2 mA TJ = 100°C 1000V 3 Qxx08xHy TJ = 25°C 400 - 800V 10 μA 1000V 20 TJ = 125°C 400 - 800V 2 mA TJ = 100°C 1000V 3 Thermal Resistances Symbol Parameter Value Unit Rθ(J-C) Junction to case (AC) L/Qxx08Ryy / L/Qxx08Nyy 1. 5 °C/WL/Qxx08Lyy 2.8 L/Qxx08Vyy 2.1 Rθ(J-A) Junction to ambient L/Qxx08Ryy 45 °C/WL/Qxx08Lyy 50 L/Qxx08Vyy 64 Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity Figure 2: Normalized DC Gate T rigger Current for All Quadrants vs. Junction T emperature Junction Temperature (TJ)- ºC -65 -40 -15 10 35 60 85 110 125 0.0 Ratio of IGT IGT (TJ = 25°C) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Figure 1: Definition of Quadrants Note: Alternistors will not operate in QIV MT2 POSITIVE (Positi ve Half Cycle) MT2 NEGATIVE (Negative Half Cycle) NOTE: Alternistor s will not operate in QIV MT1 MT2 + IGT REF QII MT1 IGT GATE MT2 REF MT1 MT2 REF MT1 MT2 REF QI QIV QIII ALL POLARITIES ARE REFERENCED TO MT1 (-) IGT GATE (+) IGT - IGT GATE (-) IGT GATE (+)

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: Normalized DC Gate T rigger Voltage for All Quadrants vs. Junction T emperature Junction Temperature (TJ)- ºC -65 -40 -151 03 56 08 51 10 125 0.0 Ratio of IH IH (TJ = 25°C) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Junction Temperature (TJ)- ºC Ratio of VGT VGT (TJ = 25°C) -65 -40 -151 03 56 08 51 10 125 0.0 0.5 1.0 1.5 2.0 Figure 7: Maximum Allowable Case T emperature vs. On-State Current (Standard / Alternistor T riac) Figure 8: On-State Current vs. On-State Voltage (T ypical) TC = 25°C Postitive or Negative Instantaneous On-State Voltage (vT) - Volts Postitive or Negative Instantaneous On-State Current (iT) - Amps RMS On-State Current (IT(RMS)) - Amps 0246 81 0 Average On-State Power Dissipation (PD(AV)) - Watts Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current Figure 6: Maximum Allowable Case T emperature vs. On-State Current (Sensitive T riac) RMS On-State Current (IT(RMS)) - Amps 012345678 100 105 110 Maximum Allowable Case Temperature (TC) - °C Lxx08Vy Lxx08Dy Lxx08Ry Lxx08Ly CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawings RMS On-State Current (IT(RMS)) - Amps 100 110 120 130 Maximum Allowable Case Temperature (TC) - °C 01234567 8 Qxx08Lyy Qxx08Ryy Qxx08Nyy Qxx08Vyy Qxx08Dyy Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Surge Current Duration- Full Cycles Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps 11 01 00 1000 100 L/Qxx08Ryy L/Qxx08Lyy L/Qxx08Nyy L/Qxx08Vyy L/Qxx08Dyy Figure 10: Surge Peak On-State Current vs. Number of Cycles SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Figure 9: Maximum Allowable Ambient T emperature vs. On-State Current RMS On-State Current (IT(RMS)) - Amps 100 120 Maximum Allowable Ambient Temperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 FREE AIR RATING - NO HEATSINK L/Qxx08Lyy L/Qxx08Ryy L/Qxx08Vyy Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Soldering Parameters Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking (VDRM) MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours T emperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High T emp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-T emp Storage 1008 hours; -40°C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwell- time at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 T erminal Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1. 14 1 .52 R 0.038 0.048 0.97 1 .22 Dimensions — TO-220AB (L-Package) — Isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1. 14 1 .52 R 0.038 0.048 0.97 1 .22 K J A H G B F E C D L R TC MEASURING POINT AREA (REF.) 0.17 IN2 MT2 O P N M MT1 GATE .320 8.13 .526 13.36 .276 7.01 K J A H G B F E C D L R TC MEASURING POINT MT2 MT2 O P N M MT1 .276 7.01 .526 13.36 .320 8.13 GATE AREA (REF.) 0.17 IN2 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm).

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount Dimensions — TO-251AA (V-Package) — V-PAK Through Hole Dimension Inches Millimeters Min Typ Max Min Typ Max Dimension Inches Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1. 14 1 .52 F 0.060 0.075 1 .52 1 .91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1. 14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1 .02 1 .78 G B A W V S MT1 MT2 TC MEASURING POINT C E K H J U .320 8.13 .276 7.01 .331 8.41 GATE .460 11.68 .665 16.89 .260 6.60 .150 3.81 .080 2.03 .085 2.16 .055 1.40 .350 8.89 .276 7.01 .276 7.01 AREA: 0.11 IN2 D F AREA: 0.040 IN2TC MEASURING POINT GATE G I E D A B C F J H K L 5.28 .208 5.34 .210 MT2 MT1 MT2 P Q R S

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount Dimension Inches Millimeters Min Typ Max Min Typ Max M O N HJ L K .118 .063 1.60 .071 1.80 .264 6.71 .264 6.71 .181 4.60 GATE MT2 MT1 MT2 TC MEASURING POINT G I D E A B C F 5.28 .208 5.34 .210 : 0.040 IN2AREA P Q

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series Product Selector Part Number Voltage (xx) Gate Sensitivity Quadrants Type Package 400V 600V 800V 1000V I – II – III IV Lxx08L6 X X 5 mA 10 mA Sensitive Triac TO-220L Lxx08D6 X X 5 mA 10 mA Sensitive Triac TO-252 D-PAK Lxx08R6 X X 5mA 10mA Sensitive Triac TO-220R Lxx08V6 X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK Lxx08L8 X X 10 mA 20 mA Sensitive Triac TO-220L Lxx08D8 X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK Lxx08R8 X X 10mA 20mA Sensitive Triac TO-220R Lxx08V8 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK Qxx08RH3 X X 10 mA Alternistor Triac TO-220R Qxx08VH3 X X 10 mA Alternistor Triac TO-251 V-PAK Qxx08DH3 X X 10 mA Alternistor Triac TO-252 D-PAK Qxx08L4 X 25 mA Triac TO-220L Qxx08R4 X 25 mA Triac TO-220R Qxx08N4 X 25 mA Triac TO-263 D²-PAK Qxx08LH4 X X X X 35 mA Alternistor Triac TO-220L Qxx08RH4 X X X X 35 mA Alternistor Triac TO-220R Qxx08VH4 X X X X 35 mA Alternistor Triac TO-251 V-PAK Qxx08DH4 X X X X 35 mA Alternistor Triac TO-252 D-PAK Qxx08NH4 X X X X 35 mA Alternistor Triac TO-263 D²-PAK Qxx08L5 X X X 50 mA Triac TO-220L Qxx08R5 X X X 50 mA Triac TO-220R Qxx08N5 X X X 50 mA Triac TO-263 D²-PAK Packing Options Part Number Marking Weight Packing Mode Base Quantity L/Qxx08L/Ryy L/Qxx08L/Ryy 2.2 g Bulk 500 L/Qxx08L/RyyTP L/Qxx08L/Ryy 2.2 g Tube Pack 500 (50 per tube) Qxx08NyyTP Qxx08Nyy 1 .6 g Tube 500 (50 per tube) Qxx08NyyRP Qxx08Nyy 1 .6 g Embossed Carrier 500 L/Qxx08DyyTP L/Qxx08Dyy 0.3 g Tube 750 (75 per tube) L/Qxx08DyyRP L/Qxx08Dyy 0.3 g Embossed Carrier 2500 L/Qxx08VyyTP L/Qxx08Vyy 0.4 g Tube 750 (75 per tube) Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series 0.512 (13.0) Arbor Hole Dia. DC XXXXXX XXXXXX DC XXXXXX DC XXXXXX XX XX XX Gate MT1 MT2 0.63 (16.0) 0.157 (4.0) 0.64 (16.3) 12.99 (330.0) 0.524 (13.3) 0.315 (8.0) 0.059 Dia(1.5) * Cover tape Direction of Feed Dimensions are in inches (and millimeters). Gate MT1 MT2 0.512 (13.0) Arbor Hole Dia. 0.945 (24.0) 0.63 (16.0) 1.01 (25.7) 12.99 (330.0) 0.827 (21.0) 0.157 (4.0) Direction of Feed Dimensions are in inches (and millimeters). * Cover tape 0.059 DIA(1.5) TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards

Revised: June 24, 2011 04:57 PM ©2011 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Lxx08xx & Qxx08xx & Qxx08xHx Series CURRENT 08: 8A SENSITIVITY & TYPE Sensitive Triac: 6 : 5 mA (QI, II, III) 10 mA (QIV) 8 : 10 mA (QI, II, III) 20 mA (QIV) Standard Triac: : 25 mA (QI, II, III) 5 : 50 mA (QI, II, III) Alternistor Triac: H3 : 10 mA (QI, II, III) H4 : 35 mA (QI, II, III) PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D2PAK) V : TO-251 (VPAK) D : TO-252 (DPAK) VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V LEAD FORM DIMENSIONS xx : Lead Form Option Q 60 08 L 5 56 DEVICE TYPE L : Sensitive Triac Q : Triac or Alternistor Part Numbering System Part Marking System MY MY Q6008R5 Q6008L5 L6008V5 YMLDD TO-252AA –( D Package) TO-251AA –( V Package)