PZUXBL_SER NEXPERIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 12
Technical content
Datasheet sections
- Non-repetitive peak rerverse power dissipation: PZSM ≤ 40 W
- Total power dissipation: Ptot ≤ 250 mW
- Tolerance series: B: approximately ±5 %; B2: approximately ±2 %
- Wide working voltage range: nominal 2.4 V to 36 V (E24 range)
- Low reverse current IR range
- Small plastic package suitable for surface-mounted design
- AEC-Q101 qualified 1.3. Applications
- General regulation functions 1.4. Quick reference data
Table 1. Quick reference data [4] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1cm2.
Table 2. Pinning Table 3. Ordering information [1] The series consists of 29 types with nominal working voltages from 2.4 V to 36 V. [2] The series consists of 25 types with nominal working voltages from 2.7 V to 24 V.
Table 4. Marking codes
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [3] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1cm2. Table 6. Thermal characteristics [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1cm2. [3] Soldering point of cathode tab. Table 7. Characteristics
Table 8. Characteristics per type; PZU2.4BL to PZU36BL
Single Zener diodes in a SOD882 package Working voltage VZ (V); Maximum differential resistance rdif (Ω) Temperature coefficient SZ (mV/K); Diode capacitance Cd (pF) ; VR = 0 V IZ = 5 mA IZ = 0.5 mA IZ = 5 mA Reverse current IR (μA) IZ = 5 mA f = 1 MHz; Non-repetitive peak reverse current IZSM (A) tp = 100 μs; square wave; Tj = 25 °C ; prior to surge PZU xBL Sel Min Max Max Max Max VR (V) Typ Max Max B 12.47 13.9613 B2 12.91 13.49 80 10 0.1 10 9.4 103 2.5 14 B2 13.70 14.30 80 10 0.1 11 10.4 101 2 B 13.84 15.5215 B2 14.34 14.98 80 15 0.05 11 11.4 99 2 B 15.37 17.0916 B2 15.85 16.51 80 20 0.05 12 12.4 97 1.5 B 16.94 19.0318 B2 17.56 18.35 80 20 0.05 13 14.4 93 1.5 B 18.86 21.0820 B2 19.52 20.39 100 20 0.05 15 16.4 88 1.5 B 20.88 23.1722 B2 21.54 22.47 100 25 0.05 17 18.4 84 1.3 B 22.93 25.5724 B2 23.72 24.78 120 30 0.05 19 20.4 80 1.3 27 B 25.1 28.9 150 40 0.05 21 23.4 73 1 30 B 28 32 200 40 0.05 23 26.6 66 1 33 B 31 35 250 40 0.05 25 29.7 60 0.9 36 B 34 38 300 60 0.05 27 33.0 59 0.8 006aab129 102 103 PZSM (W) tp (ms) 10- 1 101 Tj = 25 °C Fig. 1. Non-repetitive peak reverse power dissipation as a function of pulse duration; maximum values VF (V) 0.6 10.8 mbg781 100 200 300 IF (mA) Tj = 25 °C Fig. 2. Forward current as a function of forward voltage; typical values PZUXBL_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2019. All rights reserved Product data sheet Rev. 2 — 11 November 2019 6 / 12
Single Zener diodes in a SOD882 package 0 60 - 2 - 3 - 1 mgl273 20 40 IZ (mA) SZ (mV/K) 4.3 3.9 3.6 3.3 3.0 2.4 2.7 PZU2.4BL to PZU4.3B2L Tj = 25 °C to 150 °C Fig. 3. Temperature coefficient as a function of working current; typical values 0 2016 - 5 mgl274 4 8 12 IZ (mA) SZ (mV/K) 4.7 9.1 8.2 7.5 6.8 6.2 5.6 5.1 PZU4.7BL to PZU12B2L Tj = 25 °C to 150 °C Fig. 4. Temperature coefficient as a function of working current; typical values 006aab246 10- 1 10- 2 102 IZ (mA) 10- 3 VZ (V) 0 542 31 VZ(nom) (V) = 2.4 2.7 3.0 3.3 3.6 3.9 4.3 PZU2.4BL to PZU4.3B2L Tj = 25 °C Fig. 5. Working current as a function of working voltage; typical values 006aab247 10- 1 10- 2 102 IZ (mA) 10- 3 VZ (V) 0 1410 12862 4 VZ(nom) (V) = 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 PZU4.7BL to PZU12B2L Tj = 25 °C Fig. 6. Working current as a function of working voltage; typical values PZUXBL_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2019. All rights reserved Product data sheet Rev. 2 — 11 November 2019 7 / 12
Single Zener diodes in a SOD882 package 006aab248 10- 1 10- 2 102 IZ (mA) 10- 3 VZ (V) 10 403020 VZ(nom) (V) = 13 PZU13BL to PZU36BL Tj = 25 °C Fig. 7. Working current as a function of working voltage; typical values 8. Test information Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. 9. Package outline 03-04-17Dimensions in mm 0.55 0.47 0.65 0.62 0.55 0.50 0.46 cathode marking on top side (if applicable) 1.02 0.95 0.30 0.22 0.30 0.22 Fig. 8. Package outline SOD882 PZUXBL_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2019. All rights reserved Product data sheet Rev. 2 — 11 November 2019 8 / 12
Single Zener diodes in a SOD882 package 10. Soldering solder lands solder resist occupied area solder paste sod882_fr 0.9 0.3 (2×) R0.05 (8×) 0.6 (2×) 0.7 (2×) 0.4 (2×) 1.3 0.5 (2×) 0.8 (2×) 0.7 Dimensions in mm Reflow soldering is the only recommended soldering method. Fig. 9. Reflow soldering footprint for SOD882 PZUXBL_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2019. All rights reserved Product data sheet Rev. 2 — 11 November 2019 9 / 12
Table 9. Revision history
- Legal texts have been adapted to the new company name where appropriate. PZUXBL_SER v. 1 20080506 Product data sheet - - PZUXBL_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2019. All rights reserved Product data sheet Rev. 2 — 11 November 2019 10 / 12
Single Zener diodes in a SOD882 package 12. Legal information Data sheet status Document status [1][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the internet at https://www.nexperia.com. Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use in automotive applications — This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. PZUXBL_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2019. All rights reserved Product data sheet Rev. 2 — 11 November 2019 11 / 12