PW210 SJM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • 5 - 6000MHz
  • Gain 20.0dB @ 950MHz
  • P1dB 16.0dBm @ 950MHz
  • OIP3 30.4dBm @ 950MHz
  • Lead-free / Green / compliant SOT-89 Package

Applications

1 ESD sensitive device. Observe handling precautions.

2 HBM: Class 2, JESD22-A114

3 CDM: Class C3 , JESD22-

4 MSL 3, J-STD-020

  • Set-top Box
  • FTTH Receiver
  • Drop Amplifier
  • Satellite Amplifier
  • Bluetooth / WiFi Functional Diagram RF IN GND 2,4 RF OUT / Bias 3 1) Stresses above the maximum values listed have may cause permanent damage to the device. 2) MTTF is more than 100 years.

http://www.prewell.com 2 CATV Amplifier SJM PREWELL PW210 Productsand product information are subject to change without notice.Version 0.9 950 1150 1350 1550 1750 1950 2150 25℃ P1dB (dBm) Frequency (MHz) P1dB vs Frequency 950 1150 1350 1550 1750 1950 2150 -30 -20 -10 S21 (dB) Frequency (MHz) Gain vs Frequency S21 S22 S11 950 1150 1350 1550 1750 1950 2150 25℃ NF (dB) Frequency (MHz) NF vs. Frequency Parameters Units Frequency (MHz) 950 1250 1550 1850 2150 Typical RF Performance for Application Circuit Supply Bias Voltage = 5V, R(bias)= 5.6 ohm, Current= 46mA Recommended Bias Values Supply Voltage ( V ) R bias Value (ohm) Size 5 5.6 0805 5.3 12 0805 6 27 0805 7 51 1210 8 71 1210 9 91 2010 10 113 2010 12 155 2512 RF IN RF OUT56pF 56pF 22nH 56pF 1uF Supply Voltage RBIAS S-Parameter NF vs. Frequency 950 1150 1350 1550 1750 1950 2150 25℃ OIP3 (dBm) Frequency (MHz) OIP3 vs Frequency OIP3 vs. Frequency P1dB vs. Frequency

http://www.prewell.com 3 CATV Amplifier SJM PREWELL PW210 Productsand product information are subject to change without notice.Version 0.9 Lead-free /RoHS Compliant / Green SOT-89 Package Outline Land Pattern Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 ozcopper minimum. 3 Measurement for our data sheet was made on 1.6mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add mounting screws near the part to fasten the board to a heatsink. 6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. Evaluation Board Layout (30x40) REF. DIMENSIONS (mm) Min. Max. A 1.40 1.60 B 0.43 0.58 B1 0.36 0.54 C 0.35 0.46 D 4.30 4.70 D1 1.50 1.87 E 2.29 2.70 E1 2.13 2.18 e 1.5 e1 3.0 H 3.43 5.10 L 0.74 1.20 Product Code Lot Number PW210 X X X X