PW114_V01 SJM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • 5 to 1000MHz
  • Gain 19.3dB @ 140MHz
  • P1dB 19.8dBm @ 500MHz
  • OIP3 40.2dBm @ 70MHz
  • Lead-free / Green / compliant SOT-89 Package

Applications

1 ESD sensitive device. Observe handling precautions.

2 HBM: Class 1C, JESD22-A114

3 CDM: Class C3 , JESD22-

4 MSL 3, J-STD-020

  • Base station / Repeater / Mobile / Automotive / Military – FDD-LTE, TD-LTE, TDS-CDMA, CDMA, WCDMA, WiMAX, PCS, GSM, GPS, GPRS, TETRA
  • IoT/ Broadcasting / WLAN – FM, DMB, DVB, ISM Functional Diagram RF IN GND 2,4 RF OUT / Bias 3 1) Stresses above the maximum values listed have may cause permanent damage to the device. 2) MTTF is more than 100 years.

http://www.prewell.com 2 Gain Block SJM PREWELL PW114 Productsand product information are subject to change without notice.Version 0.9 Parameters Units Frequency (MHz) 50 70 140 250 500 900 S11 dB -21 -24 -30 -35 -25 -22 S22 dB -11 -12 -12 -12 -12 -11 Typical RF Performance for IF Amp Application CircuitⅠ Supply Bias Voltage = 5V, R(bias)= 2ohm, Current= 86mA Recommended Bias Values Supply Voltage ( V ) RBIAS Value (ohm) Size 5 2.0 0805 5.3 5.5 0805 6 13.6 0805 7 25.2 1210 8 36.9 1210 9 48.5 2010 10 60.0 2010 12 83.4 2512 0 200 400 600 800 1000 25℃ -40℃ 85℃ S21 (dB) Frequency (MHz) Gain vs Frequency 0 200 400 600 800 1000 -50 -40 -30 -20 -10 25℃ -40℃ 85℃ S11 (dB) Frequency (MHz) Input Return Loss 0 200 400 600 800 1000 -15 -12 25℃ -40℃ 85℃ S22 (dB) Frequency (MHz) Output Return Loss Gain vs. Frequency Input Return Loss Output Return Loss RF IN RF OUT10nF 10nF 820nH 10nF 1uF Supply Voltage RBIAS 0 200 400 600 800 1000 25℃ -40℃ 85℃ OIP3 (dBm) Frequency (MHz) OIP3 vs Frequency OIP3 vs. Frequency

http://www.prewell.com 3 Gain Block SJM PREWELL PW114 Productsand product information are subject to change without notice.Version 0.9 3 5 7 9 11 13 OIP3 @ 70MHz OIP3 @ 140MHz OIP3 @ 250MHz OIP3 @ 500MHz OIP3 (dBm) Output Power (dBm) OIP3 vs Output Power 0 200 400 600 800 1000 25℃ -40℃ 85℃ P1dB (dBm) Frequency (MHz) P1dB vs Frequency 0 200 400 600 800 1000 25℃ NF (dB) Frequency (MHz) NF vs. Frequency -20 -15 -10 -5 0 5 Gain Output Power Output power(dBm) / Gain (dB) Input Power (dBm) Output Power / Gain vs Input Power @ 70MHz -20 -15 -10 -5 0 5 Gain Output Power Output power(dBm) / Gain (dB) Input Power (dBm) Output Power / Gain vs Input Power @ 250MHz 8 10 12 14 16 18 -70 -64 -58 -52 -46 -40 25℃ ACPR (dBc) Output Channel Power (dBm) ACPR IS-95A vs. Channel Power IS-95, 9 Ch.Forward, 30 kHz Meas BW, +/- 885 kHz offset Freq. = 70MHz -20 -15 -10 -5 0 5 Gain Output Power Output power(dBm) / Gain (dB) Input Power (dBm) Output Power / Gain vs Input Power @ 500MHz P1dB vs. Frequency NF vs. Frequency OIP3 vs. Output Power Output Power / Gain vs Input Power @ 70MHz Output Power / Gain vs Input Power @ 250MHz Output Power / Gain vs Input Power @ 500MHz ACPR IS-95A vs. Channel Power IS-95, 9 Ch.Forward, 30 kHz MeasBW, +/- 885 kHz offset 0 1 2 3 4 5 6 7 120 160 200 25℃ Id (mA) Vd (V) Id vs. Vd Id vs. Vd

http://www.prewell.com 4 Gain Block SJM PREWELL PW114 Productsand product information are subject to change without notice.Version 0.9 0 200 400 600 800 1000 -60 -50 -40 -30 -20 -10 25℃ -40℃ 85℃ S11 (dB) Frequency (MHz) Input Return Loss 0 200 400 600 800 1000 -25 -20 -15 -10 25℃ -40℃ 85℃ S22 (dB) Frequency (MHz) Output Return Loss Parameters Units Frequency (MHz) 50 70 140 250 500 900 S11 dB -23 -25 -30 -32 -32 -25 S22 dB -11 -12 -12 -12 -13 -16 Typical RF Performance for 50 -1000MHz Tuned Application Circuit Ⅱ Supply Bias Voltage = 5V, R(bias)= 2ohm, Current= 86mA 0 200 400 600 800 1000 25℃ -40℃ 85℃ S21 (dB) Frequency (MHz) Gain vs Frequency Input Return Loss Output Return Loss Gain vs. Frequency RF IN RF OUT10nF 10nF 820nH 10nF 1uF Supply Voltage RBIAS 3.3nH

http://www.prewell.com 5 Gain Block SJM PREWELL PW114 Productsand product information are subject to change without notice.Version 0.9 Evaluation Board Layout (40x40) Lead-free /RoHS Compliant / Green SOT-89 Package Outline Land Pattern Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 ozcopper minimum. 3 Measurement for our data sheet was made on 0.8mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add mounting screws near the part to fasten the board to a heatsink. 6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. REF. DIMENSIONS (mm) Min. Max. A 1.40 1.60 B 0.43 0.58 B1 0.36 0.54 C 0.35 0.46 D 4.30 4.70 D1 1.50 1.87 E 2.29 2.70 E1 2.13 2.18 e 1.5 e1 3.0 H 3.43 5.10 L 0.74 1.20 Product Code Lot Number POOOO X X X X