PW111_V01 SJM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • 40 - 1500MHz
  • Gain 24.2dB @ 300MHz
  • CSO 65dBc @ 20dBmV
  • CTB 85dBc @ 20dBmV
  • NF 1.9dB @ 800MHz
  • Lead-free / Green / compliant SOT-89 Package

Description

ThePW111isa highperformanceInGaPHBTMMICAmplifierthat isinternallymatchedto75Ωinput/output. ThefeaturesofPW111are highlinearperformance,highCSO/CTBperformance,highreliability and low noiseas a CATVamplifier. The PW111 operatesfroma singlesupplyvoltageandrequiresminimalexternalcomponentsfor operation. Thepurposeof usingPW111is thatoffershighdynamic rangein a lowcostsurface- mountedplasticSOT-89 package. All devicesare100% RFandDCtested. Specifications 1) Test Conditions : T=25°C, Supply Voltage=6V, Rbias=18.6ohm, 75ohm System 2) Note 1. Two Tones, 1MHz Spacing, 3dBm per Tone at Output Absolute Maximum Ratings Parameter Rating Unit Device Voltage 8 V Device Current 265 mA RF Power Input 10 dBm Storage Temperature -55 to 150 °C Ambient Operating Temperature -40 to 85 °C Junction Temperature 188 °C Parameter Units Typ. Condition S21 dB 23.0 40 ~ 1500MHz S11 dB -12 @ 1000 MHz S22 dB -10 @ 1000 MHz CSO dBc 58 20dBmV/132ch Flat CTB dBc 80 20dBmV/132ch Flat OIP3 dBm 30.0 Note 1 2) P1dB dBm 17.0 @ 500 MHz NF dB 1.9 @ 800 MHz V / I mA 4.74 / 69 Rth °C/W 63 ESD/MSL 1 ESD sensitive device. Observe handling precautions.

2 HBM: Class 2, JESD22-A114

3 CDM: Class C3 , JESD22-

4 MSL 3, J-STD-020

2,4 RF OUT / Bias 3 1) Stresses above the maximum values listed have may cause permanent damage to the device. 2) MTTF is more than 100 years.

Applications

  • Headend
  • Drop Amplifier
  • Cable Modem
  • Laser Diode Driver
  • FTTH Receiver
  • Optical Transmitter
  • RFoG/ MOCA

http://www.prewell.com 2 CATV Amplifier SJM PREWELL PW111 Productsand product information are subject to change without notice.Version 0.6 0 150 300 450 600 750 900 1050 1200 1350 1500 25℃ OIP3 (dBm) Frequency (MHz) 0 150 300 450 600 750 900 1050 1200 1350 1500 25℃ P1dB (dBm) Frequency (MHz) 0 150 300 450 600 750 900 1050 1200 1350 1500 -30 -20 -10 Gain Input Return Loss Output Return Loss S-parameter (dB) Frequency (MHz) 0 100 200 300 400 500 600 700 800 900 1000 Rbias : 18.6ohm_69mA CTB (-dBc) Frequency (MHz) CTB vs. Frequency 132 channels, 20dBmV/channel flat loading, 25℃ 0 100 200 300 400 500 600 700 800 900 1000 Rbias : 18.6ohm_69mA CSO (-dBc) Frequency (MHz) CSO vs. Frequency 132 channels, 20dBmV/channel flat loading, 25℃ 0 150 300 450 600 750 900 1050 1200 1350 1500 25℃ NF (dB) Frequency (MHz) NF vs. FrequencyS-parameter vs. Frequency 40 –1500MHz CATV Application Circuit RF IN RF OUT10nF 10nF 820nH 10uF 1uF Supply Voltage RBIAS 100nH 100Ω Supply Voltage ( V ) R bias Value (ohm) Size 6 18.6 1210 8 47.2 1210 10 76.5 2010 12 105.6 2512 Recommended Bias Values P1dB vs. FrequencyOIP3 vs. Frequency

http://www.prewell.com 3 CATV Amplifier SJM PREWELL PW111 Productsand product information are subject to change without notice.Version 0.6 Mounting Instructions 1 Use a large ground pad area with many plated through-holes as shown. 2 We recommend 1 ozcopper minimum. 3 Measurement for our data sheet was made on 1.6mm thick FR-4 Board. 4 RF trace width depends on the board material and construction. 5 Add mounting screws near the part to fasten the board to a heatsink. 6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. Lead-free /RoHS Compliant / Green SOT-89 Package Outline Land Pattern REF. DIMENSIONS (mm) Min. Max. A 1.40 1.60 B 0.43 0.58 B1 0.36 0.54 C 0.35 0.46 D 4.30 4.70 D1 1.50 1.87 E 2.29 2.70 E1 2.13 2.18 e 1.5 e1 3.0 H 3.43 5.10 L 0.74 1.20 Product Code Lot Number POOOO X X X X Evaluation Board Layout (30x40)