PW084XS1 AZDISPLAYS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 25

Technical content

Datasheet sections

  • 1 Application
  • 2 Features
  • 3 Mechanical Specifications
  • 4 Mechanical Drawing of TFT-LCD module
  • 5 Input / Output Terminals
  • 7 Absolute Maximum Ratings
  • 8 Electrical Characteristics
  • 9 Power Sequence
  • 10 Optical Characteristics
  • 11 Handling Cautions
  • 12 Reliability Test
  • 13 Block Diagram
  • 14 Packing

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1 Version : 1.4 TECHNICAL SPECIFICATION MODEL NO. : PW084XS1 Customer’s Confirmation C u s t o m e r D a t e B y PVI’s Confirmation C o n f i r m e d B y Prepared By FOR MORE INFORMATION: A Z DISPLAYS, INC.

75 COLUMBIA, ALISO VIEJO, CA, 92656

http://www.AZDISPLAYS.com Date : May 17,2005 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval.

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 1. Application This technical specification applies to 8.4” color TFT-LCD module, PW084XS1. The applications of the panel are car TV, portable DVD, GPS, multimedia applications and others AV system. 2. Features . Pixel in stripe configuration . Slim and compact . High Brightness . Image Reversion ：Up/Down and Left/Right . Wide Viewing Angle . Support multi display mode (If you use this mode, you must use PVI-1004C’s timing controller (mode by PVI)) 3. Mechanical Specifications Parameter Specifications Unit Screen Size 8.4 (16:9 diagonal) Inch Display Format 1440 (H) ×234(V) dot Active Area 185.76 (H)×104.60 (V) mm Dot Pitch 0.129(H)×0.447(V) mm Pixel Configuration Stripe Outline Dimension 199.5(W)× 118.9(H) × 7.4(D)(typ.) mm Surface Treatment Anti-Glare+WV film Weight 258±5 g

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 4. Mechanical Drawing of TFT-LCD Module

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 5. Input / Output Terminals LCD Module Connector FPC Down Connect , 30 Pins , Pitch : 0.5 mm Pin No Symbol I/O Description Remark

1 GND - Ground for logic circuit

2 VCC I Supply voltage of logic control circuit for gate driver Note 5-3

3 NC - No connection

4 VEE I Negative power gate driver Note 5-4

5 NC - No connection

6 VGH I Positive power for gate driver Note 5-5

7 NC - No connection

8 STVD I/O Vertical start pulse

9 STVU I/O Vertical start pulse Note 5-1

10 CKV I Shift clock for gate driver

11 U/D I Up / Down Control for gate driver Note 5-1

12 OE3 I Output enable for gate driver

13 OE2 I Output enable for gate driver

14 OE1 I Output enable for gate driver

15 VCOM I Common electrode voltage

16 STHL I/O Start pulse for source driver Note 5-2

17 VSS2 - Ground for analog circuit

18 VR I Video Input R

19 VG I Video Input G

20 VB I Video Input B

21 VSS1 - Ground for digital circuit

22 VDD2 I Supply power for analog circuit Note 5-6

23 CPH1 I Sampling and shift clock for source driver

24 CPH2 I Sampling and shift clock for source driver

25 CPH3 I Sampling and shift clock for source driver

26 VDD1 I Supply power for digital circuit Note 5-7

27 R/L I Left / Right Control for source driver Note 5-2

28 NC I No Connection

29 OEH I Output enable for source driver

30 STHR I/O Start pulse for source driver Note 5-2

U/D STVD STVU scanning direction Vcc Input output down to up GND Output input up to down Note 5-2 R/L STHL STHR scanning direction Vcc output input left to right GND input output right to left

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 The definitions of Note 5-1,5-2 Note 5-3 : VCC TYP.＝+5V Note 5-4 : VEE TYP.＝-12V Note 5-5 : VGH TYP.＝+17V Note 5-6 : VDD2 TYP.＝+5V Note 5-7 : VDD1 TYP.＝+5V 6. Pixel Arrangement and input connector pin NO. RB GRBG RB GRBG RB GRBG RB GRBG RB GRBG RB GRBG RB GRBG RB GRBG RB GRBG RB GRBG RB GRBG RB GRBG Source driver Gate driver Line 1440Line 1 Row 1 Row 2 Row 3 Row 4 Row 233 Row 234 Input FPC Pin 1Pin 30 U/D(PIN 11)=Low R/L(PIN 27)=High U/D(PIN 11)=High R/L(PIN 27)=Low

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 7. Absolute Maximum Ratings The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Parameter Symbol MIN. MAX. Unit Remark VDD2 -0.3 +5.8 V Supply Voltage For Source Driver VDD1 -0.3 +7.0 V V CC -0.3 +6.0 V V GH-VEE -0.3 +40.0 V H Level V GH -0.3 +25.0 V Supply Voltage For Gate Driver L Level VEE -16 +0.3 V Analog Signal Input Level V R,VG,VB -0.2 V DD1+0.2 V Note 7-1 Storage Temperature -30 +80 ℃ Operation Temperature -20 +80 ℃ Note 7-2 Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Optical characteristics shown in Table 10-1 are measured under Ta=+25℃. 8. Electrical Characteristics 8-1) Recommended Driving condition for TFT-LCD panel Parameter Symbol MIN. Typ. MAX. Unit Remark Analog V DD2 +4.5 +5.0 +5.5 V Supply Voltage For Source Driver Logic V DD1 +4.5 +5.0 +5.5 V H level V GH +15 +17 +19 V L level V EE DC -13.0 -12 -10.5 V DC Component of VEE V EE AC +6.0 V P-P AC Component of VEE Supply Voltage For Gate Driver Logic V CC +4.5 +5.0 +5.5 V Analog Signal input Level Amplitud +0.3 V CC-0.3 V H level V IH 0.7 V DD1 - V DD1 V Digital input voltage L level V IL -0.3 - 0.3 V DD1 V H level V OH 0.7 V DD1 - V DD1 V Digital output voltage L level V OL -0.3 - 0.3 V DD1 V VCOM AC - +6.0 - VP-P AC Component of VCOM VCOM VCOM DC 1.6 1.8 2.0 V DC Component of VCOM Note 8-1 Note 8-1 : PVI strongly suggests that the V COM DC level shall be adjustable , and the adjustable level range is 1.8V ±1V , every module’s VCOM DC level shall be carefully adjusted to show a best image performance.

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 8-2) Back Light driving (JST BHSR-02VS-1 ,Pin No.：2) Pin No Symbol Description Remark

1 VL1 Input terminal (Hi voltage side) Wire color: pink

2 VL2 Input terminal (Low voltage side) Wire color: white Note 8-2

Note 8-2 : Low voltage side of back light inverter connects with Ground of inverter circuits. Recommended driving condition for back light Ta= 25 ℃ Parameter Symbol Min. Typ. Max. Unit Remark Lamp voltage V L 585 637 716 Vrms Lamp current I L 4 6 8 mA Note 8-3 Lamp frequency P L 40 55 80 KHz Note 8-4 Starting voltage(25℃) (Reference Value) Vs 930 Vrms Note 8-5 Starting voltage(0℃) (Reference Value) Vs 1170 Vrms Note 8-5 Note 8-3 : In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused b y B / L . Note 8-4 : The waveform of lamp driving voltage should be as closed to a perfect sine wave as p o s s i b l e . Note 8-5 : This value is not output voltage of inverter. The voltage of inverter must larger than the starting voltage. The kick-off time must larger than 1 second. 8-3) Power Consumption T a = 2 5 ℃ Parameter Symbol Conditions TYP. MAX Unit Remark Supply current for Gate Driver (Hi level) I GH VGH ＝ +17V 0.11 0.17 mA Supply current for Gate Driver (Low level) I EE VEE ＝ -12V 1.12 1.68 mA Supply current for Source Driver(Digital) IDD1 VDD1 ＝ +5V 1.80 4.50 mA Supply current for Source Driver(Analog) IDD2 VDD2 ＝ +5V 10.5 15.0 mA Supply current for Gate Driver (Digital) I CC VCC ＝ +5V 0.02 0.05 mA LCD Panel Power Consumption 76.9 120.8 mW Note 8-6 Back Light Lamp Power Consumption 3.82 W Note 8-7 Note 8-6 : The power consumption for back light is not included. Note 8-7 : Back light lamp power consumption is calculated by I L×VL.

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 8-4) Timing Characteristics Of Input Signals Characteristics Symbol Min. Typ. Max. Unit Remark Rising time t r - - 10 ns Falling time t f - - 10 ns High and low level pulse width t CPH 9.2 9.6 10.0 MHz CPH1~CPH3 CPH pulse duty t CWH 30 50 70 % CPH1~CPH3 STH setup time t SUH 20 - - ns STHR,STHL STH hold time t HDH 20 - - ns STHR,STHL STH pulse width t STH - 1 - t CPH STHR,STHL STH period t H 61.5 63.5 65.5 μs STHR,STHL OEH pulse width t OEH - 1.40 - μs OEH Sample and hold disable time t DIS1 - 7.43 - μs OEV pulse width t OEV - 18 - μs OEV CKV pulse width t CKV - 31.75 - μs CKV Clean enable time t DIS2 - 9.0 - μs Horizontal display start t SH - 0 - t CPH/3 Horizontal display timing range t DH - 480 - t CPH STV setup time t SUV 400 - - Ns STVR,STVL STV hold time t HDV 400 - - Ns STVR,STVL STV pulse width t STV - - 1 t H STVR,STVL Horizontal lines per field t V 256 262 268 t H Vertical display start t SV 3 - t H Vertical display timing range t DV 234 - t H VCOM rising time t rCOM - 5 Μs VCOM falling time t fCOM - 5 Μs VCOM delay time t DCOM - 3 Μs RGB delay time t DRGB - 1 Μs

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 8-5) Signal Timing Waveforms tr tf 10% 90% 10% 90% tSUH tHDH tSTH tCPH tCWH 50%50% STHL(R) CPH1 CPH2 (L) CPH3 (L) Fig. 8-1 Sa mpling clock ti ming

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 Input (STHL/STHR) Output (STHR/STHL) CPH1 tDH Fig. 8-2 Horizontal display timing range

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 tH VCAC VCD C White Blank Black VIDC VIA VIAC White Black Blank (HSY) OEH STHL(R) OE 1,2,3 CKV VCOM V(R,G,B) Fig. 8-3 (a) Horizontal timing

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 tDRGB trCOM tfCOM 10% 90%90% 10% 50% tDCOM tDIS2 tCKV tOEV tOEH tDIS1 tSTH (HSY) OEH STHL(R) OE 1,2,3 CKV VCOM V(R,G,B) Note : The falling edge of OEV should be synchronized with the falling edge of OEH Fig. 8-3 (b) Detail horizontal timing

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 tSUV tHDV tCKV STVU(D) CKV Fig. 8-4 Vertical shift clock timing

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 Vertical timing (From up to down) Display on panel first line V(R,G,B) (HSY) (VSY) STVL VCOM (Odd field) VCOM (Even field) Fig. 8-5 (a) Vertical timing (From Up to Down) tsv

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 Vertical timing (From down to up) Display on panel first line V(R,G,B) (HSY) (VSY) STVL VCOM (Odd field) VCOM (Even field) Fig. 8-5 (b) Vertical timing (From Down to Up) tsv

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 9. Power on Sequence The Power on Sequence only effect by V CC, VDD,VEE and VGH, the others do not care. 1) 10ms ≦T1<T2 2) 0ms<T3 ≦T4≦10ms 10. Optical Characteristics 10-1) Specification Ta = 25 ℃ Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks Horizontal θ21,θ22 55 60 deg θ12 35 40 deg Viewing Angle Vertical θ11 CR≧10 45 50 deg Note 10-1 Contrast Ratio CR At optimized Viewing angle 200 350 Note 10-2 Rise Tr 15 30 ms Response time Fall Tf θ=0° 25 50 ms Note 10-4 Brightness 350 400 cd/㎡ Note 10-3 Uniformity U 70 75 % Note 10-5 x 0.270 0.300 0.330 White Chromaticity y θ=0° 0.297 0.327 0.357 Note 10-3 Lamp Life Time +25℃ 30000 hrs VSS(0V) VGH ONOFF OFF VDD,VCC VEE Logic signal RGB-Video signal

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 Note 10-1 : The definitions of viewing angles Luminance when Testing point is WhiteNote 10-2 : CR ＝ Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. Note 10-3 : 1. Topcon BM-7(fast) luminance meter 1°field of view is used in the testing (after 20~30 minutes operation). 2.Lamp current : 6 mA 3.Inverter model : TDK-347. Note 10-4 : The definition of response time: 100% 90% 10% White White Brightness Black Tr Tf

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 Note 10-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U = The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 1/6 2/6 2/6

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 10-2) Testing configuration y LCD Display y R, G, B Waveform of Pa ttern A at Testing Point y R, G, B Waveform of Pa ttern B at Testing Point 500mm BM-7(fast) LCD Backlight R,G,B signal Pattern generator input Pattern A Pattern B Testing Point Testing Point 63.6us 63.6us 63.6us 63.6us Caution: 1. Environmental illumination ≦1 lux 2. Before test CR, Vcom voltage must be adjusted ca refully to get the best CR. Vcom RGB waveform RGB waveform Vcom RGB Signal Level =4.0 Vp-p(white to black)

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled c a r e f u l l y . d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. 11-4) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction.

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 12. Reliability Test No Test Item Test Condition

1 High Temperature Storage Test Ta = +80℃, 240 hrs

2 Low Temperature Storage Test Ta = -30℃, 240 hrs

3 High Temperature Operation Test Ta = +80℃, 240 hrs

4 Low Temperature Operation Test Ta = -20℃, 240 hrs

5 High Temperature & High Humidity

Operation Test Ta = +60℃, 80%RH, 240 hrs

6 Thermal Cycling Test

(non-operating) -30℃→+80℃, 200 Cycles 3 0 m i n 3 0 m i n

7 Vibration Test

(non-operating) Frequency：10 ~ 55 HZ Amplitude：1 mm Sweep time: 11 mins Test Period: 6 Cycles for each direction of X, Y, Z

8 Shock Test

(non-operating) 100G, 6ms Direction: ±X, ±Y, ±Z Cycle: 3 times

9 Electrostatic Discharge Test

(non-operating) 200pF , 0Ω ±200V 1 time / each terminal Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function.

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 13. Block Diagram LCD Panel H Driver (Source) Back-light

30 PIN Input

(Gate)

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 14. Packing

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25

Revision History

Rev. Issued Date Revised Contents 1.0 Oct. 24, 2003 NEW 1.1 Nov.24, 2003 Modify Page17 : Optical Characteristics (contrast ratio from 150 to 350 Typ.) (contrast ratio from 110 to 200 Min.) Page23: 12. Reliability Test NO.3 Test Item→ Low Temperature Operation Test change to High Temperature Operation Test 1.2 Apr.1,2004 Modify Page4: 4.Mechanical Drawing of TFT-LCD Module (Change ground line form 45mm increase length to 100mm) 1.3 Oct..4,2004 Updata: Page8:Note 8-5 B/L Lamp voltage kick-off time 1.4 Jun.17,2004 Modify Page4: 4.Mechanical Drawing of TFT-LCD Module→FPC change (Two piece FPC band to one piece)