PW070XS1

PW070XS1 AZDISPLAYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 25

Technical content

Datasheet sections

• 1 Application
• 2 Features
• 3 Mechanical Specifications
• 4 Mechanical Drawing of TFT-LCD module
• 5 Input / Output Terminals
• 7 Absolute Maximum Ratings
• 8 Electrical Characteristics
• 9 Power Sequence
• 10 Optical Characteristics
• 11 Handling Cautions
• 12 Reliability Test
• 13 Indication of Lot Number Label
• 14 Block Diagram
• 15 Packing

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1 Version : 1.6 TECHNICAL SPECIFICATION MODEL NO. : PW070XS1 Customer’s Confirmation C u s t o m e r D a t e B y PVI’s Confirmation C o n f i r m e d B y Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC.

75 COLUMBIA, ALISO VIEJO, CA, 92656

Http://www.AZDISPLAYS.com Date : Apr.29,2004 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval.

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 1. Application This technical specification applies to 7.0” color TFT-LCD module, PW070XS1. The applications of the panel are car TV, portable DVD, GPS, multimedia applications and others AV system. 2. Features . Pixel in stripe configuration . Slim and compact . High Brightness . Image Reversion jUp/Down and Left/Right . Wide Viewing Angle . Support multi display mode (If you use this mode, you must use PVI-1004B’s timing controller (mode by PVI)) 3. Mechanical Specifications Parameter Specifications Unit Screen Size 7.0 (16:9 diagonal) Inch Display Format 1440 (H) Ò234(V) dot Active Area 154.08 (H)Ò87.05 (V) mm Dot Pitch 0.107(H)Ò0.372 (V) mm Pixel Configuration Stripe Outline Dimension 166.0 (W)Ò100.0 (H)Ò7.2 (D) (typ.) mm Surface Treatment Anti-Glare and Hard Coating Weight 180Ô10 g

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 4.Mechanical Drawing of TFT-LCD Module

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 5.Input / Output Terminals LCD Module Connector FPC Down Connect , 30 Pins , Pitch : 0.5 mm Pin No Symbol I/O Description Remark

1 GND - Ground for logic circuit

2 VCC I Supply voltage of logic control circuit for gate driver Note 5-3

3 NC - No connection

4 VEE I Negative power gate driver Note 5-4

5 NC - No connection

6 VGH I Positive power for gate driver Note 5-5

7 NC - No connection

8 STVD I/O Vertical start pulse

9 STVU I/O Vertical start pulse Note 5-1

10 CKV I Shift clock for gate driver

11 U/D I Up / Down Control for gate driver Note 5-1

12 OE3 I Output enable for gate driver

13 OE2 I Output enable for gate driver

14 OE1 I Output enable for gate driver

15 VCOM I Common electrode voltage

16 STHL I/O Start pulse for source driver Note 5-2

17 VSS2 - Ground for analog circuit

18 VR I Video Input R

19 VG I Video Input G

20 VB I Video Input B

21 VSS1 - Ground for digital circuit

22 VDD2 I Supply power for analog circuit Note 5-6

23 CPH1 I Sampling and shift clock for source driver

24 CPH2 I Sampling and shift clock for source driver

25 CPH3 I Sampling and shift clock for source driver

26 VDD1 I Supply power for digital circuit Note 5-7

27 R/L I Left / Right Control for source driver Note 5-2

28 NC I No Connection

29 OEH I Output enable for source driver

30 STHR I/O Start pulse for source driver Note 5-2

U/D STVD STVU scanning direction Vcc Input output down to up GND Output input up to down Note 5-2 R/L STHL STHR scanning direction Vcc output input left to right GND input output right to left

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 The definitions of Note 5-1,5-2 6% 1*/ -PX3- 1*/ )JHI 6% 1*/ )JHI3- 1*/ -PX Note 5-3 : VCC TYP.Ø+5V Note 5-4 : VEE TYP.Ø-12V Note 5-5 : VGH TYP.Ø+17V Note 5-6 : VDD2 TYP.Ø+5V Note 5-7 : VDD1 TYP.Ø+5V 6. Pixel Arrangement and input connector pin NO. 3# (3#( 3# (3#( 3# (3#( 3# (3#( 3# (3#( 3# (3#( 3# (3#( 3# (3#( 3# (3#( 3# (3#( 3# (3#( 3# (3#( 4PVSDFESJWFS (BUFESJWFS -JOF-JOF 3PX 3PX 3PX 3PX 3PX 3PX *OQVU '1$ 1JO1JO

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 7. Absolute Maximum Ratings The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Parameter Symbol MIN. MAX. Unit Remark VDD2 -0.3 +5.8 V Supply Voltage For Source Driver VDD1 -0.3 +7.0 V VCC -0.3 +6.0 V VGH-VEE -0.3 +40.0 V H Level VGH -0.3 +25.0 V Supply Voltage For Gate Driver L Level VEE -16 +0.3 V Analog Signal Input Level VR,VG,VB -0.2 VDD1+0.2 V Note 7-1 Storage Temperature -30 +80 Ċ Operation Temperature -20 +80 Ċ Note 7-2 Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Optical characteristics shown in Table 10-1 are measured under Ta=+25Ċ. 8. Electrical Characteristics 8-1) Recommended Driving condition for TFT-LCD panel Parameter Symbol MIN. Typ. MAX. Unit Remark Analog VDD2 +4.5 +5.0 +5.5 V Supply Voltage For Source Driver Logic VDD1 +4.5 +5.0 +5.5 V H level VGH +15 +17 +19 V L level VEE DC -13.0 -12 -10.5 V DC Component of VEE VEE AC +6.0 VP-P AC Component of V EE Supply Voltage For Gate Driver Logic VCC +4.5 +5.0 +5.5 V Analog Signal input Level Amplitud +0.3 VCC-0.3 V H level VIH 0.7 VDD1 - VDD1 V Digital input voltage L level VIL -0.3 - 0.3 VDD1 V H level VOH 0.7 VDD1 - VDD1 V Digital output voltage L level VOL -0.3 - 0.3 VDD1 V VCOM AC - +6.0 - VP-P AC Component of V COMVCOM VCOM DC 1.3 1.5 1.7 V DC Component of V COM Note 8-1 Note 8-1 : PVI strongly suggests that the VCOM DC level shall be adjustable , and the adjustable level range is 1.5V Ô1V , every module’s VCOM DC level shall be carefully adjusted to show a best image performance.

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 8-2) Back Light driving (JST BHSR-02VS-1 ,Pin No.j2) Pin No Symbol Description Remark

1 VL1 Input terminal (Hi voltage side) Wire color: pink

2 VL2 Input terminal (Low voltage side) Wire color: white Note 8-1

Note 8-1 : Low voltage side of back light inverter connects with Ground of inverter circuits. Recommended driving condition for back light Ta= 25 Ċ Parameter Symbol Min. Typ. Max. Unit Remark Lamp voltage VL 474 527 580 Vrms IL=6mA Lamp current IL 3 6 8 mA Note 8-2 Lamp frequency PL 40 55 80 KHz Note 8-3 Starting voltage(25Ċ) (Reference Value) Vs 630 Vrms Note 8-4 Starting voltage(0Ċ) (Reference Value) Vs 890 Vrms Note 8-4 Note 8-2 : In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused b y B / L . Note 8-3 : The waveform of lamp driving voltage should be as closed to a perfect sine wave as p o s s i b l e . Note 8-4 : This value is not output voltage of inverter. The voltage of inverter must larger than the starting voltage. The kick-off time must larger than 1 second. 8-3) Power Consumption T a = 2 5 Ċ Parameter Symbol Conditions TYP. MAX Unit Remark Supply current for Gate Driver (Hi level) IGH VGH Ø +17V 0.11 0.17 mA Supply current for Gate Driver (Low level) IEE VEE Ø -12V 1.12 1.68 mA Supply current for Source Driver(Digital) IDD1 VDD1 Ø +5V 1.80 4.50 mA Supply current for Source Driver(Analog) IDD2 VDD2 Ø +5V 10.5 15.0 mA Supply current for Gate Driver (Digital) ICC VCC Ø +5V 0.02 0.05 mA LCD Panel Power Consumption 76.9 120.8 mW Note 8-5 Back Light Lamp Power Consumption 3.15 W Note 8-6 Note 8-5: The power consumption for back light is not included. Note 8-6: Back light lamp power consumption is calculated by ILÒVL.

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 8-4) Timing Characteristics Of Input Signals Characteristics Symbol Min. Typ. Max. Unit Remark Rising time tr - - 10 ns Falling time tf - - 10 ns High and low level pulse width tCPH 9.2 9.6 10.0 MHz CPH1~CPH3 CPH pulse duty tCWH 30 50 70 % CPH1~CPH3 STH setup time tSUH 20 - - ns STHR,STHL STH hold time tHDH 20 - - ns STHR,STHL STH pulse width tSTH - 1 - tCPH STHR,STHL STH period tH 61.5 63.5 65.5 DŽs STHR,STHL OEH pulse width tOEH - 1.40 - DŽs OEH Sample and hold disable time tDIS1 - 7.43 - DŽs OEV pulse width tOEV - 18 - DŽs OEV CKV pulse width tCKV - 31.75 - DŽs CKV Clean enable time tDIS2 - 9.0 - DŽs Horizontal display start tSH - 0 - tCPH/3 Horizontal display timing range tDH - 480 - tCPH STV setup time tSUV 400 - - Ns STVR,STVL STV hold time tHDV 400 - - Ns STVR,STVL STV pulse width tSTV - - 1 tH STVR,STVL Horizontal lines per field tV 256 262 268 tH Vertical display start tSV 3 - tH Vertical display timing range tDV 234 - tH VCOM rising time trCOM - 5 Ƭs VCOM falling time tfCOM - 5 Ƭs VCOM delay time tDCOM - 3 Ƭs RGB delay time tDRGB - 1 Ƭs

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 8-5) Signal Timing Waveforms US UG U46) U)%) U45) U$1) U$8) 45)- 3 $1) $1) $1) 'JH4BNQMJOHDMPDLUJNJOH

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 *OQVU 45)-45)3 0VUQVU 45)345)- $1) U%) 'JH)PSJ[POUBMEJTQMBZUJNJOHSBOHF

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 7$"$ 7$% 8IJUF #MBOL #MBDL 7*%$ 8IJUF #MBDL #MBOL )4: 0&) 45)- 3 $,7 7$0. 7 3 'JH B )PSJ[POUBMUJNJOH

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 U%3(# US$0. UG$0. U%$0. U%*4 U$,7 U0&7 U0&) U%*4 U45) )4: 0&) 45)- 3 $,7 7$0. 7 3 /PUF5IFGBMMJOHFEHFPG0&7TIPVMECFTZODISPOJ[FEXJUIUIFGBMMJOHFEHFPG0&) 'JH C %FUBJMIPSJ[POUBMUJNJOH

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 U467 U)%7 U$,7 4576 % $,7 'JH7FSUJDBMTIJGUDMPDLUJNJOH

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 Vertical timing (From up to down) %JTQMBZPOQBOFMGJSTUMJOF 7 3 )4: 74: 457- 7$0. 0EEGJFME 7$0. &WFOGJFME 'JH B 7FSUJDBMUJNJOH 'SPN6QUP%PXO UTW

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 Vertical timing (From down to up) %JTQMBZPOQBOFMGJSTUMJOF 7 3 )4: 74: 457- 7$0. 0EEGJFME 7$0. &WFOGJFME 'JH C 7FSUJDBMUJNJOH 'SPN%PXOUP6Q UTW

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 9. Power on Sequence 744 7 7() 0/0'' 0'' 7%% 7$$ 7&& -PHJDTJHOBM 3(#7JEFPTJHOBM The Power on Sequence only effect by VCC, VDD,VEE and VGH, the others do not care. 1) 10ms ÙT1<T2 2) 0ms<T3 ÙT4Ù10ms 10. Optical Characteristics 10-1) Specification Ta = 25Ċ Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks Horizontal ǀ21,ǀ22 55 60 deg ǀ12 35 40 deg Viewing Angle Vertical ǀ11 CRÚ10 45 50 deg Note 10-1 Contrast Ratio CR At optimized Viewing angle 200 350 Note 10-2 Rise Tr 15 30 ms Response time Fall Tf ǀ=0Ę 25 50 ms Note 10-4 Brightness 350 400 cd/Ĕ Note 10-3 Transmission Ratio T 7.8 8.3 % Uniformity U 70 75 % Note 10-5 x 0.260 0.290 0.320 White Chromaticity y ǀ=0Ę 0.280 0.310 0.340 Note 10-3 Lamp Life Time +25Ċ 40000 hr

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 Note 10-1 : The definitions of viewing angles LNote 10-2 : CR Ø uminance when Testing point is White Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. Note 10-3 : Topcon BM-7(fast) luminance meter 2Ęfield of view is used in the testing (after 20~30 minutes operation). Lamp Current 6mA Note 10-4 : The definition of response time: 100% 90% 10% White White Brightness Black Tr Tf

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 Note 10-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U = The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 1/62/6 2/6

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 10-2) Testing configuration y LCD Display y R, G, B Waveform of Pattern A at Testing Point y R, G, B Waveform of Pattern B at Testing Point 500mm BM-7(fast) LCD Backlight R,G,B signal Pattern generator input Pattern A Pattern B Testing Point Testing Point 63.6us 63.6us 63.6us 63.6us Caution: 1. Environmental illuminationÙ1 lux 2. Before test CR, Vcom voltage must be adj usted car efully to get the best CR. Vcom RGB waveform RGB waveform Vcom RGB Signal Level =4.0 Vp-p(white to black)

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled c a r e f u l l y . d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. 11-4) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction.

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 12. Reliability Test No Test Item Test Condition

1 High Temperature Storage Test Ta = +95Ċ, 240 hrs

2 Low Temperature Storage Test Ta = -40Ċ, 240 hrs

3 High Temperature Operation Test Ta = +85Ċ, 240 hrs

4 Low Temperature Operation Test Ta = -30Ċ, 240 hrs

5 High Temperature & High Humidity

Operation Test Ta = +60Ċ, 90%RH, 240 hrs

6 Thermal Cycling Test

(non-operating) -30Ċ ÷ +80 Ċ, 200 Cycles 3 0 min 3 0 min

7 Vibration Test

(non-operating) Frequencyj10 ~ 55 HZ Amplitudej1 mm Sweep time: 11 mins Test Period: 6 Cycles for each direction of X, Y, Z

8 Shock Test

(non-operating) 100G, 6ms Direction: ÔX, ÔY, ÔZ Cycle: 3 times

9 Electrostatic Discharge Test

(non-operating) 200pF , 0Ƹ Ô200V 1 time / each terminal Ta: ambient temperature [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. 13. Indication of Lot Number Label a) Indicated contents of the label Lot number Module number OOO-OOOOOO PW070XS1XXS Contents of lot number : 1st~3rd—The OEM product 5th—Production year : 1999 ⇒9, 2000⇒A, 2001⇒B…….. 6th—Production month : 1, 2, 3,….9, A, B, C 7th~8th—Production size : 7.0”⇒70 9 th~10th— Serial numbers : 01~99

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 14. Block Diagram -$%1BOFM )%SJWFS 4PVSDF #BDLMJHIU 1*/*OQVU *OWFSUFS 7%SJWFS (BUF

The information contained herein is the excl usive property of Prime View International Co., Ltd. and sha ll not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 15. Packing

The information contained herein is the excl usive property of Prime View Internati onal Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25

Revision History

Rev. Issued Date Revised Contents 0.1 Sep. 02, 2002 NEW 0.2 Nov. 26,2002 Modify Page 4 mechanical Drawing (change thickness from 6.8mm to 7.2mm and back light connector from BHR-03VS-1 to BHSR-02VS-1 ) 0.3 Dec. 11,2002 Modify Page 4 mechanical Drawing (change back light wire from 50mm to 100 m m ) 1.0 Feb. 11,2003 Confirm Page 3 Mechanical Specifications (Weight) Confirm Page 8 back light specification and Power Consumption Modify Page 17 optics specification Modify Page 22 Reliability Test (Low Temperature Operation Test from -30Ċ to -20Ċ) Modify Page 24 packing drawing Modify Page 22 reliability test(Electrostatic Discharge Test method) 1.1 Sep. 01,2003 Modify Page 4 mechanical Drawing 1.2 Sep. 18,2003 Modify Page 8 Power Consumption Modify Page 8 Lamp voltage Modify Page 22 Reliability Test (High Temperature & High Humidity, Ta = +60 Ċ, 90%RH, 240 hrs) 1.3 Nov. 25,2003 Modify Page17 Contrast Ratio (CR from Typ.150,Min.110 to Typ.350,Min.200) 1.4 Jun. 28,2004 Modify Page 4 Mechanical Drawing of TFT-LCD Module Page 17 Optical Characteristics (White Chromaticity) 1.5 Oct. 12,2004 Modify Page 8 Note 8-4 Add Lamp kick –off time 1.6 Apr.29.2005 Modify Page22 12 Reliability test ( Modify Test condition) H T S T + 8 0Ċ Î+95Ċ H T O T + 8 0ĊÎ+85Ċ LTST –30 ĊÎ-40Ċ LTOT –20 ĊÎ-30Ċ