PW035XS4

PW035XS4 AZDISPLAYS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 27

Technical content

Datasheet sections

• 1 Application
• 2 Features
• 3 Mechanical Specifications
• 4 Mechanical Drawing of TFT-LCD module
• 5 Input / Output Terminals
• 7 Absolute Maximum Ratings
• 8 Electrical Characteristics
• 9 Power On Sequence
• 10 Optical Characteristics
• 11 Handling Cautions
• 12 Reliability Test
• 13 Block Diagram
• 14 Packing

7KH LQIRUPDWLRQ FRQWDLQHG KHUHLQ LV WKH H[FOXVLYH SURSHUW\\ RI 3ULPH 9LHZ ,QWHUQDWLRQDO &R /WG DQG VKDOO QRW EH GLVWULEXWHGUHSURGXFHGRUGLVFORVHGLQZKROHRULQSDUWZLWKR XWSULRUZULWWHQSHUPLVVLRQRI3ULPH9LHZ ,QWHUQDWLRQDO&R /WG 3DJH 9HUVLRQ 3.0 02'(/12 PW035XS4 &XVWRPHU¶V&RQILUPDWLRQ &XVWRPHU 39,¶V&RQILUPDWLRQ &RQILUPHG%\\ 3UHSDUHG%\\ 'DWH March 288 7KLVWHFKQLFDOVSHFLILFDWLRQLVVXEMHFWWRFKDQJHZLWKRXWQRWLFH )25025(,1)250$7,21 $= ',63/$<6,1& +WWS ZZZ$=',63/$<6FRP 3W035XS4

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2

Revision History

Rev. Issued Date Revised Contents 1.0 Apr.30, 2007 NEW 2.0 Nov.12, 2007 Modify Page 27: 14. Delete carton and change packing

3.0 March 28,2008 Change outline

P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 1. Application This technical specification applies to 3.5” color TFT-LCD module , PW035XS4. The applications of the panel are car TV, portable DVD, DV,GPS, multimedia applications and other AV systems.. 2. Features . Amorphous silicon TFT-LCD panel with LED Backlight unit. . Compatible with NTSC & PAL system . Pixel in stripe configuration . Slim and compact . Image Reversion : Up/Down and Left/Right . Support multi display mode (If you use this mode ,you must use PVI-1004D’s timing controller (made by PVI)) . Wide viewing angle 3. Mechanical Specifications Parameter Specifications Unit Screen Size 3.5 (16:9 diagonal) inch Display Format 320ͪ( RGB )ͪ234 dot Active Area 76.32(H)ͪ42.82(V) mm Pixel Pitch 0.2385(H)ͪ0.1829 (V) mm Pixel Configuration Stripe Outline Dimension 88.0(W) Ø 53.5(H) Ø 3.5(D)(typ.) mm Weight 34²5 g Back-light 6-LED Surface Treatment Anti – Glare Display model Normally white Gray scale inversion direction 12 o’clock [Note 10- 1 ] P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 4. Mechanical Drawing of TFT-LCD Module P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 5. Input / Output Terminals TFT-LCD Module Connector FPC Down Connect , 30Pins , Pitch : 0.5 mm Pin No Symbol I/O Description Remark

1 GLED1 I Ground for LED backlight

2 VLED1 I Supply voltage of LED backlight Note 5-7

3 GLED2 I Ground for LED backlight

4 VLED2 I Supply voltage of LED backlight Note 5-7

5 GND - Ground for logic circuit

6 VCC I Supply voltage of logic control circuit for gate driver Note 5-2

7 VEE I Negative power for gate driver Note 5-3

8 VGH I Positive power for gate driver Note 5-4

9 STVD I/O Vertical start pulse

10 STVU I/O Vertical start pulse Note 5-8

11 CKV I Shift clock for gate driver

12 U/D I Up / Down control for gate driver Note 5-8

13 OE3 I Output enable for gate driver

14 OE2 I Output enable for gate driver

15 OE1 I Output enable for gate driver

16 VCOM I Common electrode voltage Note 5-1

17 STHL I/O Start pulse for source driver Note 5-8

18 VSS2 - Ground for analog circuit

19 VR I Video Input R

20 VG I Video Input G

21 VB I Video Input B

22 VSS1 - Ground for digital circuit

23 VDD2 I Supply power of analog circuit Note 5-5

24 CPH1 I Sampling and shift clock for source driver

25 CPH2 I Sampling and shift clock for source driver

26 CPH3 I Sampling and shift clock for source driver

27 VDD1 I Supply power for digital circuit Note 5-6

28 R/L I Left / Right control for source driver Note 5-8

29 OEH I Output enable for source driver

30 STHR I/O Start pulse for source driver Note 5-8

P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 Note5-1: VCOM (Typ.)= 6.0 VPP. Phase of the video signal input and VCOM The relation between these values could refer to 8-1 Operating condition Liquid crystal transmission of the video signal input , VCOM and timing VCOM H Level L Level Video Signal Input Maximum Black White Video Signal Input Minimum White Black White : maximum transmission / Black : minimum transmission Note 5-2 : VCC TYP.Ј+3.3V Note 5-3 : VEE TYP.Ј-12V Note 5-4 : VGH TYP.Ј+17V Note 5-5 : VDD2 TYP.Ј+5V 100% white pedestal Composite Video Signal ˩˖ˢˠ 1H 1H ˩˘˘ ˩˖ˢˠʳ˗˖ ˩˖ˢˠʳ˔˖ ˩˼ʳ˔˖ ˩˼ʳ˗˖ Black white Black white P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 Note 5-6 : VDD1 TYP.Ј+3.3V Note 5-7 : ILED1 , ILED2 TYP.=20 mA Note 5-8: STHL,STHR and R/L mode STVD,STVU and U/D mode Note 5 –9 : The CPH1 reference Fig.8-1 Sampling clock timing CPH2 and CPH3 connect GND. R/L STHL STHR Remark High(VDD1) Output Input Left to Right Low(0 Volt.) Input Output Right to Left U/D STVD STVU Remark High(VCC) Input Output Down to Up Low(0 Volt.) Output Input Up to Down P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 6. Pixel Arrangement BGRRB G R 1 st line 1 st pixel 232 th line 320 th pixel 3 rd line 2 nd line 234 th line 233 th line RB GRBG RB GRBG RB G RB G RB GRBG RB GRBG BG BGR BGR BGR BGR BGR RGB1Pixel= P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 7. Absolute Maximum Ratings : The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. GND = 0 VΔTa = 25 к Parameter Symbol MIN. MAX. Unit Remark VDD2 -0.3 +5.8 V Supply Voltage For Source Driver VDD1 -0.3 +7.0 V V CC -0.3 +6.0 V V GH-VEE -0.3 +40.0 V H Level V GH -0.3 +25.0 V Supply Voltage For Gate Driver L Level VEE -16 +0.3 V 8. Electrical Characteristics 8-1) Operating Condition for TFT-LCD panel Ta=25 к Parameter Symbol MIN. Typ. MAX. Unit Remark Analog V DD2 +4.5 +5.0 +5.5 V +3.0 +3.3 +3.6 Supply Voltage For Source Driver Logic V DD1 +4.5 +5.0 +5.5 V Depend on T/C Signal voltage VGH +15 +17 +19 V VEE DC -13 -12 -10.5 V DC Component of VEE VEE AC - +6.0 - V P-P AC Component of V EE +3.0 +3.3 +3.6 Supply Voltage For Gate Driver Logic V CC +4.5 +5.0 +5.5 V Depend on T/C Signal voltage ViAC - +3.6 +4.0 V Note 8-2 Analog Signal input Level (VR , VG , VB) ViDC - 2.5 - V H level V IH 0.7 V DD1 - V DD1 V Digital input voltage L level V IL -0.3 - 0.3 V DD1 V H level V OH 0.7 V DD1 - V DD1 V Digital output voltage L level V OL -0.3 - 0.3 V DD1 V VCOM AC - +6.0 - VP-P AC Component of VCOMVCOM VCOM DC - 1.5 - V DC Component of VCOM Note 8-1 Note 8-1 : PVI strongly suggests that the V COM DC level shall be adjustable , and the adjustable level r a n g e i s 1 . 5 V̈́1V , every module’s VCOM DC level shall be carefully adjusted to show a best i m a g e p e r f o r m a n c e . P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 3.6~4.0V Note 8-2: Both NTSC and PAL system Video Signal input waveform is based on 8 steps gray scale. 8-2) Recommended driving condition for LED backlight T a = 2 5 к Parameter Symbol Min TYP MAX Unit Remark VLED1 Supply voltage of LED backlight VLED2 ILED1 Supply current of LED backlight ILED2 - 20 - mA Note 8-4 Backlight Power Consumption P LED - - 432 mW Note 8-3/Note 8-5 Note 8-3 : ILED= 20mA,constant current Note 8-4 : The LED driving condition is defined for each LED module. (3 LED Serial) Input current = 20mA * 2 Note 8-5 : PLED = VLED1* ILED1 + VLED2* ILED2 . VLED-2 VLED-1 Anode Cathode 8-7) Power Consumption Ta = 25 к Parameter Symbol Conditions TYP. MAX Unit Remark Supply current for Gate Driver (Hi level) I GH VGH Ј+17V 0.1 0.3 mA Supply current for Gate Driver (Low level) I EE VEE Ј-12V 0.1 0.3 mA V EE center voltage Supply current for Source Driver(Digital) I DD1 VDD1Ј+3.3V 0.8 1.6 mA Supply current for Source Driver(Analog) I DD2 VDD2Ј+5V 0.35 7.0 mA Supply current for Gate Driver (Digital) I CC VCC Ј+3.3V 0.1 0.3 mA LCD Panel Power Consumption - - 23.4 50 mW Backlight Power Consumption P LED - 396 432 mW Total Power Consumption - - 420 482 mW P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 Characteristics Symbol Min. Typ. Max. Unit Remark Rising time t r - - 10 ns Falling time t f - - 10 ns High and low level pulse width t CPH 147 156 166 ns CPH1~CPH3 CPH pulse duty t CWH 30 50 70 % CPH1~CPH3 STH setup time t SUH 20 - - ns STHR,STHL STH hold time t HDH 20 - - ns STHR,STHL STH pulse width t STH - 1 - t CPH STHR,STHL STH period t H 61.5 63.5 65.5 Ӵs STHR,STHL OEH pulse width t OEH - 1.6 - Ӵs OEH Sample and hold disable time t DIS1 - 4.4 - Ӵs OEV pulse width t OEV - 12 - Ӵs OEV CKV pulse width t CKV - 32 - Ӵs CKV Clean enable time t DIS2 - 6 - Ӵs Horizontal display timing range t DH - 320 - t CPH STV setup time t SUV 400 - - ns STV hold time t HDV 400 - - ns STVU,STVD STV pulse width t STV - - 1 t H STVU,STVD Horizontal lines per field t V 256 262 268 t H Vertical display start t SV 3 - t H Vertical display timing range t DV 234 - t H VCOM rising time t rCOM - 5 Ӵs VCOM falling time t fCOM - 5 Ӵs VCOM delay time t DCOM - 3 Ӵs RGB delay time t DRGB - 1 Ӵs P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 ̇̅ ̇˹ ˄˃ʸ ˌ˃ʸ ˄˃ʸ ˌ˃ʸ ̇˦˧˛ ̇˖ˣ˛ ̇˖˪˛ ˈ˃ʸˈ˃ʸ ˖ˣ˛˄ ˖ˣ˛˅ ʻ˟ʼ ˖ˣ˛ˆ ʻ˟ʼ P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 ˖ˣ˛˄ ̇˗˛ P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 Fig. 8-3 (a) Horizontal timing White Blank Black ˩˜˗˖ White Black Blank V(R,G,B) (HSY) OEH STHL(R) OE 1,2,3 CKV ˩˖ˢˠ P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 ̇ˢ˘˩ ʻ˛˦ˬʼ ˢ˘˛ ˩ʻ˥ʿ˚ʿ˕ʼ ˢ˘ʳʳ˄ʿʳ˅ʿʳˆ ˖˞˩ ̇̅˖ˢˠ ̇˹ ˖ˢˠ ˄˃ʸ ˌ˃ʸˌ˃ʸ ˄˃ʸ ˈ˃ʸ ̇˗˖ˢˠ ˩˖ˢ ˠ P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 ̇˖˞˩ ˖˞˩ P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 Vertical timing (From up to down) ˩ʻ˥ʿ˚ʿ˕ʼ ʻ˛˦ˬʼ ʻ˩˦ˬʼ ˦˧˩˨ ̇̆̉ P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 Vertical timing (From down to up) ˩ʻ˥ʿ˚ʿ˕ʼ ʻ˛˦ˬʼ ʻ˩˦ˬʼ ˦˧˩˗ ̇̆̉ P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 9. Power On Sequence The Power on Sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care. ˩˚˛ ONOFF OFF ˩˘˘ Backlight ON >10ms >10ms OFF OFF 1) 10ms ɩT1<T2 2) 0ms<T3 ЉT4Љ10ms P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 10. Optical Characteristics 10-1) Specification: Ta = 25 к Parameter Symbol Condition MIN. TYP. MAX. Unit Remarks Horizontal Ӱ21, Ӱ22 55 60 --- deg Ӱ11 35 40 --- deg Viewing Angle Vertical Ӱ12 CRЊ10 45 50 --- deg Note 10-1 Contrast Ratio CR At optimized Viewing angle 200 350 --- - Note 10-2 Rise Tr --- 15 20 ms Note 10-4Response time Fall Tf Ӱ=0̓ --- 25 30 ms Uniformity U 9 point 75 80 --- - Note 10-3 Brightness L Ӱ=0̓ 300 350 --- cd/ф LED Life time - +25к 20000 30000 --- hrs Note 10-5 Note 10-1 : The definitions of viewing angles Luminance when Testing point is White Note 10-2 : CR Ј Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 Note 10-3 : Topcon BM-7(fast) luminance meter 1.0̓field of view is used in the testing (after 1 0 m i n u t e s o p e r a t i o n ) . The Minimum Brightness of the 9 testing Points U = The Maximum Brightness of the 9 testing Points 25% 50% 75% 25% 50% 75% Note 10-4 : The definition of response time : 100% 90% 10% White White Brightness Black Tr Tf Note 10-5: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25 к and I LED =20mA. P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 10-2) Testing configuration y LCD Display y R, G, B Waveform of Pattern A at Testing Point y R, G, B Waveform of Pattern B at Testing Point 500mm BM-7(fast) LCD Backlight R,G,B signal Pattern generator input Pattern A Pattern B Testing Point Testing Point 63.6 Ӵs 63.6 Ӵs 63.6 Ӵs 63.6 Ӵs Caution: 1. Environmental illumination Љ1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best CR. Vcom RGB waveform RGB waveform Vcom Vb=5.0V +/- 0.2V Vw=1.3V +/- 0.2V P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. b) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. c) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 11-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25 12. Reliability Test No Test Item Test Condition Note

1 High Temperature Storage Test Ta = +85к, 240 hrs

2 Low Temperature Storage Test Ta = -30к, 240 hrs

3 High Temperature Operation Test Ta = +75к, 240 hrs

4 Low Temperature Operation Test Ta = -20к, 240 hrs

5 High Temperature & High Humidity

Operation Test Ta = +60к, 95%RH, 240 hrs

6 Thermal Cycling Test

(non-operating) -30кЧШ +80 к , 100 Cycles 60 min 60 min

7 Vibration test (non-operating)

Frequency : 10 ~ 55Hz Amplitude : 1mm , sweep time : 11 mins Test period : 6 cycles for each direction of X,Y, Z

8 Shock Test(non-operating) 100G , 6ms , 3cycles for each direction of X,Y,Z

9 Electrostatic Discharge Test

(non-operating) 200pF, 0Ө Machine mode = ̈́200V 1 time / each terminal Ta: ambient temperature [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image). All the cosmetic specification is judged before the reliability stress. P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:26 13. Block Diagram Input ʻ˚˴̇˸ʼ P-511-414(V:3)

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:27 14. Packing P-511-414(V:3)