PUP96N3 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.7 16/02/2021 Page: 1 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Description: The PUP96N3/PUP120N3 series of AC/DC switching power supplies are for 96-120 watts of continuous output power. They are enclosed in a 94V-0 rated plastic case with an inlet of the IEC320/C14 or IEC320/C6 to mate with interchangeable cord for world-wide use. All models meet EN55032 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements. Features:

  • No load power consumption less than 0.15W
  • Compliant with DoE level VI requirements
  • Meets energy star EPS2.0/ErP EC No 278/2009 (lot 7)
  • Meets EU CoC EPS V5 Tier2
  • Operating altitude up to 5000 meters
  • Overvoltage protection (latch)
  • Short circuit protection (auto-recovery)
  • Overcurrent protection (auto-recovery)
  • Over temperature protection (latch)
  • High efficiency, ≥89%
  • With PFC circuit
  • 100% burn-in at full rated load
  • Compliant with RoHS requirement Part Number Output Voltage Min. Current Max. Current Tolerance Ripple & Noise Wattage Average Efficiency @115/230 Vac PUP96N3-12 12V 0A 8.00A ±5% 350mV 96W 89/90% PUP96N3S-12 12V 0A 8.00A ±5% 350mV 96W 89/90% PUP120N3-12 12V 0A 10.00A ±5% 350mV 120W 89/90% PUP120N3S-12 12V 0A 10.00A ±5% 350mV 120W 89/90% PUP120N3-14 24V 0A 5.00A ±5% 350mV 120W 89/91% PUP120N3S-14 24V 0A 5.00A ±5% 350mV 120W 89/91% PUP120N3-18 48V 0A 2.50A ±5% 350mV 120W 89/91% PUP120N3S-18 48V 0A 2.50A ±5% 350mV 120W 89/91% PUP120N3-19 54V 0A 2.22A ±5% 350mV 120W 89/91% PUP120N3S-19 54V 0A 2.22A ±5% 350mV 120W 89/91% NOTES: 1. PUP120N3 models are equipped with IEC320/C14 inlet, and PUP120N3S models are equipped with IEC320/C6 inlet. 2. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 47 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output

© TT Electronics plc General Note All data sheets are subject to change without notice. ISS.7 16/02/2021 Page: 2 TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 Specifications Safety Standards & EMC Specifications Safety Standard Approvals UL 62368-1 File No. E190414 CSA C22.2 No. 62368-1 TÜV EN 62368-1 EMI Standard EN55032, FCC, and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distortion, Class D EN61000-3-3: Line flicker EN55024 EN61000-4-2: ESD, ±8 KV air and ±4 KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ±1 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 1A/m EN61000-4-11: Voltage dip immunity, 30% reduction for 500ms, and >95% reduction for 10ms *Consult with TT Electronics for information on additional country safety approvals Input Specifications Input Voltage Range 90 to 264 Vdc Input Frequency Range 47 to 63Hz Input Current 1.3A (rms) for 115 VAC or 0.7A (rms) for 230 VAC Maximum Earth Leakage Current 250μA max. @ 264 VAC, 60Hz Output Specifications Output Connection Type 4-Pin Mini Din Over Voltage Protection Set at 125–155% of its nominal output voltage Over Current Protection All models protected to short circuit conditions (auto-recovery) Temperature Coefficient All outputs ±0.04%/°C maximum Transient Response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 µs after a 25% step load change Environmental Specifications Operating Temperature 0°C → +40°C (41°C to 60°C with derating) Storage Temperature -20°C → 80°C Operating Humidity 20% to 80% non-condensing Storage Humidity 10% to 90% non-condensing General Specifications Hold-up Time 10ms minimum at 100 VAC Turn on Delay Time 3s maximum at 100 VAC Power Factor 0.95 Typical Line Regulation ±0.5% maximum at full load Inrush Current 100A @ 115 Vac or 200A @ 230 Vac at 25°C cold start Withstand Voltage 4242 VDC input to output, 2500 VDC input to ground MTBF 200,000 hours at full load at 25°C ambient, calculated per SR332

TT Electronics | Power Partners, Inc 43 Broad Street Suite B206, Hudson, MA 01749, USA. t: +1 (978) 567-9600 © TT Electronics plc General Note All data sheets are subject to change without notice. ISS.7 16/02/2021 Page: 3 Diagrams