PUP330N3 TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
TT Electronics | Power Partners, Inc 155 Northboro Road #9, Southborough, MA 01772, USA. t: +1 (978) 567 -9600 © TT Electronics plc General Note All data sheets are subject to change without noƟce. ISS.8 11/04/2024 Page: 1 DescripƟon: The PUP330N3 series of AC/DC switching power supplies are for 330 waƩs of conƟnuous output power. They are enclosed in a 94V-0 rated plasƟc case with an inlet of the IEC320/C14 to mate with interchangeable cord for world -wide use. All models meet EN55032 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements Features:
- Compliant with DoE level VI requirements
- Meets Energy Star EPS2.0/ErP EC No 278/2009 (Lot 7)
- Meets EU CoC EPS V5 Tier 2
- High Efficiency ≥89%
- No load power consumpƟon less than 0.5W
- With PFC circuit
- OperaƟng alƟtude up to 5000 meters
- Overvoltage protecƟon (latch)
- Short-circuit protecƟon (auto-recovery)
- Overpower protecƟon (auto-recovery)
- Over temperature protecƟon (latch)
- Compliant with RoHS requirements Part Number Output Voltage Min. Current Max. Current Tolerance Ripple & Noise WaƩage Average Efficiency @115/230 Vac PUP330N3-13-2-1 19.5V 0A 16.90A ±5% 350mV 330W 89/91% PUP330N3-14 24V 0A 13.75A ±5% 350mV 330W 91/93% NOTES: 1. PUP330N3 models are equipped with IEC320/C14 inlet. 2. Ripple and noise is maximum peak-to-peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 47 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output.
TT Electronics | Power Partners, Inc 155 Northboro Road #9, Southborough, MA 01772, USA. t: +1 (978) 567 -9600 © TT Electronics plc General Note All data sheets are subject to change without noƟce. ISS.8 11/04/2024 Page: 2 SpecificaƟons Safety Standards & EMC SpecificaƟons Safety Standard Approvals UL 62368-1 File No. E190414 CSA C22.2 No. 62368-1 TÜV EN 62368-1 EMI Standard EN55032, FCC, and VCCI Class B (radiated and conducted) EMC Performance EN61000-3-2: Harmonic distorƟon, Class D EN61000-3-3: Line flicker EN55035 EN61000-4-2: ESD, ±8 KV air and ±4 KV contact EN61000-4-3: Radiated immunity, 3V/m EN61000-4-4: Fast transient/burst, ±1 KV EN61000-4-5: Surge, ±1 KV diff., ±2 KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: MagneƟc field immunity, 1A/m EN61000-4-11: Voltage dip immunity, 30% reducƟon for 500ms, and >95% reducƟon for 10ms Input SpecificaƟons Input Voltage Range 90 to 264 Vdc Input Frequency Range 47 to 63Hz Input Current 3.4A (rms) for 115 VAC or 1.7A (rms) for 230 VAC Maximum Earth Leakage Current 250μA max. @ 264 VAC, 60Hz Output SpecificaƟons Output ConnecƟon Type 4-Pin Din Over Voltage ProtecƟon Set at 125–155% of its nominal output voltage Over Current ProtecƟon All models protected to short circuit condiƟons (auto-recovery) Temperature Coefficient All outputs ±0.04%/°C maximum Transient Response Maximum excursion of 4% or beƩer on all models, recovering to 1% of final value within 500 µs aŌer a 25% step load change Environmental SpecificaƟons OperaƟng Temperature 0°C → +40°C (41°C to 60°C with deraƟng) Storage Temperature -20°C → 80°C OperaƟng Humidity 20% to 80% non-condensing Storage Humidity 10% to 90% non-condensing General SpecificaƟons Hold-up Time 10ms minimum at 100 VAC Turn on Delay Time 3s maximum at 100 VAC Power Factor 0.95 Typical Line RegulaƟon ±0.5% maximum at full load Inrush Current 100A @ 115 Vac or 200A @ 230 Vac at 25°C cold start Withstand Voltage 4242 VDC input to output, 2500 VDC input to ground MTBF 200,000 hours at full load at 25°C ambient, calculated per SR332 *Consult with TT Electronics for informaƟon on addiƟonal country safety approvals
© TT Electronics plc General Note All data sheets are subject to change without noƟce. ISS.8 11/04/2024 Page: 3 TT Electronics | Power Partners, Inc 155 Northboro Road #9, Southborough, MA 01772, USA. t: +1 (978) 567 -9600 Diagrams