BTEM5000D1A SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
BTE5000 / PTE5000 / PTU5000 Series Precision differential pressure transmitters 1/5E / 11101 / B www.first-sensor.com www.sensortechnics.com
FEATURES
- 25 mbar to 10 bar, 0.3 to 150 psi differential pressure
- Precision temperature compensated and calibrated
- Rugged aluminium housing
- Female 1/8" BSP and 1/8" NPT fittings SPECIFICATIONS 10,11 Maximum ratings Supply voltage 12...32 V Source 20 mA Sink 10 mA Temperature limits Storage -40...85 °C Operating -25...85 °C Compensated 0 ...70°C Proof pressure all others 2 x rated pressure Pressure at any port all others 12 bar / 175 psi ELECTRICAL CONNECTION 4...20 mA output version 1...6 V output version MEDIA COMPATIBILITY Pressure inlet: Non-corrosive, non-ionic media such as air, dry gases and the like Housing: Aluminium, protection class IP 67 (according to DIN EN 60529, NEMA 6) VoutSensor case -Vs +Vs 1 GND V 12 to 32 V case -Vs Sensor +Vs GND
4 R L
V 12 to 32 V
BTE5000 / PTE5000 / PTU5000 Series Precision differential pressure transmitters 2/5E / 11101 / B www.first-sensor.com www.sensortechnics.com COMMON PERFORMANCE CHARACTERISTICS 8 scitsiretcarahC. niM. pyT. xaMt inU stceffelamrehT )C°07ot0( 6 tesffO napS lla ≤ seciveddisp1/rabm07 seciveddisp5/rabm053lla srehtolla 520.0± 800.0± 500.0± 100.0± 521.0± 040.0± 520.0± 540.0± C°/OSF% siseretsyhdnaytiraenil-noN 4 2.0±1 ± OSF%ytilibatsmretgnoL 5 2.0± 0(esiontuptuO ≤ f≤ )zHk14 0.0 )%09ot01(emitesnopseR 1s m 1...6 V output versions (VS = 15 V, tamb = 25°C, RL > 100 kΩ, com. mode pressure = 0) 4...20 mA output versions (VS = 15 V, tamb = 25°C, RL = 100 Ω, com. mode pressure = 0) scitsiretcarahC. niM. pyT. xaMt inU srehtolla 4.3 9.0 5.3 0.1 6.3 1.1 srehtolla 4.2 9.4 5.2 0.5 6.2 1.5 tuptuoelacslluF 0.6 noitcejerylppusrewoPt esffO napS 50.0
30.0 V/OSF%
ecnadepmituptuO 05 Ω noitpmusnocrewoP 06W m scitsiretcarahC. niM. pyT. xaMt inU srehtolla 9.11 9.3 0.21 0.4 1.21 1.4 srehtolla 9.7 9.51 0.8 0.61 1.8 1.61 tuptuoelacslluF 0.02 noitcejerylppusrewoPt esffO napS 50.0 ecnadepmituptuO 1.0 Ω I(noitpmusnocrewoP L )Am02=0 62W m INDIVIDUAL PERFORMANCE CHARACTERISTICS 8
BTE5000 / PTE5000 / PTU5000 Series Precision differential pressure transmitters 3/5E / 11101 / B www.first-sensor.com www.sensortechnics.com ELECTROMAGNETIC CAPABILITY 9 LOAD LIMITATION 4...20 mA output versions operating 200 400 10 20 1000 600 800 Ohm 1200 Vsupply V range snoitidnoctseTn oiretirC ecnerefretnI ycneuqerfoidar,detaidaR )IFR(ytinummidleifcitengamortcele :3-4-00016NEz HM0001ot08,m/V01 )zHk1(CMA%08 AO SF%1< /tneisnarttsaflacirtcelE )TFE(ytinummitsrub :4-4-00016NEV k2± BO SF%1< ytinummiegrahcsidcitatsortcelE )DSE(tset :2-4-00016NEe grahcsidtcatnoc,Vk4± egrahcsidria,Vk8± BO SF%1< secnabrutsiddetcudnocotytinummI sdleifycneuqerf-oidarybdecudni :6-4-00016NEz HM08ot51.0 )zHk1(CMA%08,V01 AO SF%1< Specification notes: 2. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 3. This is the highest pressure which can be applied to any port at any time. At the same time the differential pressure between the ports H and L must not exceed the maximum proof pressure. 4. Non-linearity refers to the B est Straight Line fit measured for offset, full scale span and 1/2 full scale span. 5. Long term stability is the change in output after one year or 1 million pressure cycles. 6. Thermal effects tested and guaranteed from 0 - 70 °C relative to 25°. All specifications shown are relative to 25°C. 7. Full scale span is the algebraic difference between the positive full scale output and zero pressure offset. 8. Higher pressure applied to port H. 9. Test are in accordance with EN 61000-6-2. 10.CE-labelling is in accordance with 2004/108/EC. 11.The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC.
BTE5000 / PTE5000 / PTU5000 Series Precision differential pressure transmitters 4/5E / 11101 / B www.first-sensor.com www.sensortechnics.com OUTLINE DRAWING ELECTRICAL CONNECTION Pin Connection 4 - 20 mA output +Vs NC case -Vs 1 - 6 V output +Vs Vout case -Vs Cable version ELECTRICAL CONNECTION bare brown white green yellow 1 - 6 V output case/shield +Vs NC Vout -Vs Connection 4 - 20 mA output case/shield +Vs NC NC -Vs dimensions in mm mass: typ. 220 g (inches) Connector version dimensions in mm mass: typ. 170 g (inches) 72.0 (2.84) NOM 86.0 (3.39) 40.0 (1.58) 20.0 (0.79) 2 x M5 (UNC 10-24) PTU...: 2 x 1/8" NPT 8.0 (0.31) min. 13.5 diam. (0.53) 8.0 (0.31) min. M12 x 1 (0.47) 9.0 (0.35) mating plug H: high pressure port L: low pressure port 90.0 (3.54) 72.0 (2.84) 40.0 (1.58) 13.5 diam. (0.53) 1 m (3.3 ft) shielded cable 4 x 0.25 mm² (AWG24) 8.0 (0.31) min. 8.0 (0.31) min. 9.0 (0.35) H: high pressure port L: low pressure port 20.0 (0.79) 2 x M5 (UNC 10-24) PTU...: 2 x 1/8" NPT
BTE5000 / PTE5000 / PTU5000 Series Precision differential pressure transmitters 5/5E / 11101 / B www.first-sensor.com www.sensortechnics.com Calibration BT: calibration in mbar/bar PT: calibration in psi Pressure connection E: 1/8" BSP female U: 1/8" NPT female For mbar ranges only Pressure range BTE5000 series PTE/PTU5000 series 010: 0...10 bar BT/PT x (M) 5xxx D x x
ORDERING INFORMATION
A: connector version C: cable version Output signal 1: 1...6 V 4: 4...20 mA Differential pressure Other pressure ranges and options are widely available. Please contact First Sensor. RECOMMENDED CABLE/CONNECTOR ACCESSORY for connector version Order number ZK000101 , other cable length on special request Flying lead end brown green white + shield yellow Pin PIN CONNECTION Included in delivery! 36.5 Ø 20 M12 x 1 NOM NOM 2 m First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.