DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • Input matched
  • Integrated ESD protection
  • Low thermal resistance
  • High gain
  • Capable of handling 10:1 VSWR @50 V, 70 W average power (DVB-T 8K OFDM, 64QAM) Integrated ESD protection
  • Low thermal resistance
  • Pb-free and RoHS compliant PTVA043502EC Package H-36248-4 PTVA043502FC Package H-37248-4 -40 -35 -30 -25 -20 -15 -10 400 500 600 700 800 900 Efficiency (%) ACPR (dBc) Frequency (MHz) DVB-T Performance Efficiency Vs Frequency POUT = 48.5 dBm, VDD = 50 V, IDQ = 850 mA ACPR Efficiency a043502efc_gcover

Data Sheet 2 of 11 Rev. 02.2, 2017-02-09 PTVA043502EC PTVA043502FC DC Characteristics Characteristic Conditions Symbol Min Typ Max Unit Drain-Source Breakdown Voltage VGS = 0 V, IDS = 10 mA V(BR)DSS 105 — — V Drain Leakage Current VDS = 50 V, VGS = 0 V IDSS — — 0.1 µA VDS = 111 V, VGS = 0 V IDSS — — 1.0 µA On-State Resistance VGS = 10 V, VDS = 0.1 V RDS(on) — 0.1 — W Operating Gate Voltage VDS = 50 V, IDQ = 850 mA VGS 3 6 8 V Gate Leakage Current VGS = 10 V, VDS = 0 V IGSS — — 1.0 µA Maximum Ratings Parameter Symbol Value Unit Drain-Source Voltage VDSS 105 V Gate-Source Voltage VGS –6 to +12 V Operating Voltage VDD 0 to +55 V Junction Temperature TJ 225 °C Storage Temperature Range TSTG –65 to +150 °C Thermal Resistance (TCASE = 70°C, 230 W CW) RqJC 0.364 °C/W RF Characteristics Typical DVB-T (8K OFDM, 64QAM) Performance (not subject to production test, verified by design/characterization in Infineon test fixture) VDD = 50 V, IDQ = 425 mA per side, tf = 25°C, DVB-T signal, BW = 8MHz, Mode = 8k, Modulation = 64-QAM, Guard = 1/4, Code rate = 1/2, P AR= 10.5 dB, ACPR integrated over 200 KHz BW at +4.3 MHz offset from center frequency Freq (MHz) Gain (dB) IRL (dB) I (A) Eff (%) POUT Avg (W) ACPR Up ACPR Low

Data Sheet 3 of 11 Rev. 02.2, 2017-02-09

Ordering Information

Type and Version Order Code Package and Description Shipping PTVA043502EC V1 R0 PTVA043502ECV1R0XTMA1 H-36248-4, bolt-down Tape & Reel, 50 pcs PTVA043502EC V1 R2 PTVA043502ECV2R0XTMA1 H-36248-4, bolt-down Tape & Reel, 250 pcs PTVA043502FC V1 R0 PTVA043502FCV1R0XTMA1 H-37248-4, earless flange Tape & Reel, 50 pcs PTVA043502FC V1 R2 PTVA043502FCV1R2XTMA1 H-37248-4, earless flange Tape & Reel, 250 pcs See next page for Typical Performance

Data Sheet 4 of 11 Rev. 02.2, 2017-02-09 PTVA043502EC PTVA043502FC Typical Performance (data taken in a production test fixture) -10 400 500 600 700 800 900 IRL (dB) Gain (dB) Frequency (MHz) DVB-T Performance Gain & IRL vs Frequency POUT = 48.5 dBm, VDD = 50 V, IDQ = 850 mA g Gain IRL a043502efc_g1 50 100 150 200 250 300 350 400 450 500 550 Efficiency (%) Gain (dB) Output Power (W) Pulsed RF Performance VDD = 50 V, IDQ = 850 mA, 100 µs, 10% DC Gain 470MHz Gain 550MHz Gain 665MHz Gain 750MHz Gain 810MHz Gain 860MHz Eff 470MHz Eff 550MHz Eff 665MHz Eff 750MHz Eff 810MHz Eff 860MHz a043502efc_g3 32 36 40 44 48 52 56 Efficiency (%) Gain (dB) Output Power (dBm) CW Performance at various VDD IDQ = 850 mA, ƒ = 860 MHz 45V Gain 50V Gain 55V Gain 45V Eff 50V Eff 55V Eff a043502efc_g4 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 32 37 42 47 52 57 Efficiency(%) IMD Up & Low (dBc) Average Output Power (dBm) Two Tone Drive-up VDD = 50 V, IDQ = 850 mA, ƒ = 860 MHz,

1 MHz Tone Spacing

a043502efc_g2

Data Sheet 5 of 11 Rev. 02.2, 2017-02-09 Load Pull at Max POUT Point – 16 µs pulse width, 10% duty cycle, class AB, VDD = 50 V, 250 mA Freq [MHz] Zl [W] PIN [dBm] POUT [dBm] POUT [W] PG [dB] PAE Eff [%] ZOUT [W] Load Pull at Max Efficiency Point – 16 µs pulse width, 10% duty cycle, class AB, VDD = 50 V, 250 mA Freq [MHz] Zl [W] PIN [dBm] POUT [dBm] POUT [W] PG [dB] PAE Eff [%] ZOUT [W] Z Optimum – 16 µs pulse width, 10% duty cycle, class AB, VDD = 50 V, 250 mA Freq [MHz] Zl [W] PIN [dBm] POUT [dBm] POUT [W] PG [dB] PAE Eff [%] ZOUT [W] Load Pull Performance

Data Sheet 6 of 11 Rev. 02.2, 2017-02-09 PTVA043502EC PTVA043502FC Reference Circuit , 470 – 860 MHz Reference circuit assembly diagram (not to scale) R802 C802 C801R801R804 C116 C104 C105 R807 C805 R806 R104 C112 C111 C110 C107 C803 R803 CX1 R106 R101 C101C103 C102 C106 C109 C108 C228 C226 C227C217 C222 C204 CX1 C224 C211 C220 C202 R201 C216 C209 C207 C225 C218 C213 C205 C201 C223 C221 R202 C208 C212 C214 C215 PTVA043502FC_OUT_03 RF_IN RO4350, 0.508 (63) RF_OUT VDD p t v a 0 4 3 5 0 2 f c _ C D _ 1 1 - 1 9 - 2 0 1 5 R102 R103 C114 C115C113 +S5 S6 10 µF 10 µF RO4350, 0.254 (63) PTVA043502FC_IN_03 C219C206 C203 C210 R105 VDD VGS VGS C804R805 R808 C806

Data Sheet 7 of 11 Rev. 02.2, 2017-02-09 Reference Circuit (cont.) Reference Circuit Assembly DUT PTVA043502EC or PTVA043502FC Test Fixture Part No. LTN/PTVA043502EC V1 or LTN/PTVA043502FC V1 PCB Input: Rogers 4350, 0.254 mm [0.010”] thick, 2 oz. copper, εr = 3.66, ƒ = 470 – 860 MHz Output: Rogers 4350, 0.508 mm [0.020”] thick, 2 oz. copper, εr = 3.66, ƒ = 470 – 860 MHz Find Gerber files for this test fixture on the Infineon Web site at http://www.infineon.com/rfpower Components Information Component Description Manufacturer P/N Input C101, C108 Capacitor, 10 µF TDK Corporation C5750X5R1H106K230KA C102, C106, C107, C110 Capacitor, 200 pF ATC ATC100B201K300XB C103, C109 Capacitor, 1 µF TDK C4532X7R2A105M230KA C104, C105, C112, C116 Capacitor, 75 pF ATC ATC100B750JW500XB C111 Capacitor, 7.5 pF ATC ATC100B7R5JW500XB C113 Capacitor, 3.9 pF ATC ATC100B3R9CW500XB C114 Capacitor, 5.6 pF ATC ATC100B5R6BW500XB C115 Capacitor, 100 pF ATC ATC100B101K500XB C801, C802, C803, C804, C805, C806 Capacitor, 1000 pF Panasonic Electronic Components ECJ-1VB1H102K R101, R105 Resistor, 1000 W Panasonic Electronic Components ERJ-8GEYJ102V R102, R103, R801, R808 Resistor, 10 W Panasonic Electronic Components ERJ-8GEYJ100V R104, R106 Resistor, 5.6 W Panasonic Electronic Components ERJ-8RQJ5R6V R802, R807 Resistor, 1300 W Panasonic Electronic Components ERJ-3GEYJ132V R803, R806 Resistor, 1200 W Panasonic Electronic Components ERJ-3GEYJ122V R804, R805 Resistor, 2000 W Panasonic Electronic Components ERJ-8GEYJ202V S1, S4 Transistor Infineon Technologies BCP56 S2, S6 Voltage Regulator Texas Instruments LM78L05ACM-ND S3, S5 Potentiometer, 2k W Bourns Inc. 3224W-202ETR-ND CX1 Coax cable Micro-Coax UT141C-25 table continued on page 7

Data Sheet 8 of 11 Rev. 02.2, 2017-02-09 PTVA043502EC PTVA043502FC Components Information Component Description Manufacturer P/N Output C201, C208, C209, C212, C214, C216, C218, C225 Capacitor, 10 µF Taiyo Yuden UMK325C7106MM-T C202, C221 Capacitor, 1 µF TDK Corporation C4532X7R2A105M230KA C203, C206, C210, C219 Capacitor, 470 µF Cornell Dubilier Electronics (CDE) SEK471M050ST C204 Capacitor, 5.6 pF ATC ATC100B5R6CW500XB C205, C207 Capacitor, 1 µF AVX Corporation 2225PC105KAT1A C211 Capacitor, 13 pF ATC ATC100B130JW500XB C213, C215 Capacitor, 10 µF AVX Corporation TPSE106K050R0400 C217 Capacitor, 1 pF ATC ATC100B1R0CW500XB C220 Capacitor, 3.9 pF ATC ATC100B3R9CW500XB C222, C226, C227, C228 Capacitor, 75 pF ATC ATC100B750JW500XB C223, C224 Capacitor, 300 pF ATC ATC100B301K500XB R201, R202 Resistor, 5.6 W Panasonic Electronic Components ERJ-8RQJ5R6V CX1 Coax cable Micro-Coax UT141C-25 Reference Circuit (cont.)

Data Sheet 9 of 11 Rev. 02.2, 2017-02-09 Package Outline Specifications Package H-36248-4 Diagram Notes—unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 2. Primary dimensions are mm. Alternate dimensions are inches. 3. All tolerances ± 0.127 [.005] unless specified otherwise. 4. Pins: D1, D2 – drains; G1, G2 – gates; S – source. 6. Gold plating thickness: 1.14 ± 0.38 micron [45 ± 15 microinch]. CL LC CL 19.81±0.20 [.780±0.008] D1 D2 G1 G2 1.02 [.040] 34.04 [1.340] SPH 1.57 [.062] 3.76±0.25 [.148±0.010] FLANGE 9.78 [.385] LID 9.40 [.370]19.43±0.51 [.765±0.020] 4X 3.81 [.150] 2X 12.70 [.500] 2X 4.83±0.51 [.190±0.020] 4X R1.52 [R.060] 2X R1.63 [R.064] S 27.94 [1.100] 2X 45° X 2.72 [45° X .107] (8.89 [.350]) (5.08 [.200])

Data Sheet 10 of 11 Rev. 02.2, 2017-02-09 PTVA043502EC PTVA043502FC Package Outline Specifications (cont.) Package H-37248-4 Find the latest and most complete information about products and packaging at the Infineon Internet page http://www.infineon.com/rfpower Diagram Notes—unless otherwise specified: 1. Interpret dimensions and tolerances per ASME Y14.5M-1994. 2. Primary dimensions are mm. Alternate dimensions are inches. 3. All tolerances ± 0.127 [.005] unless specified otherwise. 4. Pins: D1, D2 – drains; G1, G2 – gates; S – source. 6. Gold plating thickness: 1.14 ± 0.38 micron [45 ± 15 microinch]. CL LC CL 2X 12.70 [.500] 19.81±0.20 [.780±0.008] 4X 3.81 [.150] LID 9.40 [.370] FLANGE 9.78 [.385] 2X 4.83±0.51 [.190±0.020] 3.76±0.25 [.148±0.010] SPH 1.57 [.062] 4X R0.76+0.13 -0.38 [R.030 +0.005 -0.015 ]D1 D2 G1 G2 1.02 [.040] 20.57 [.810]S 2X 45° X 2.72 [45° X .107] (8.89 [.350]) (5.08 [.200]) 19.43±0.51 [.765±0.020] 0.0381 [.0015] -A-

Data Sheet 11 of 11 Rev. 02.2, 2017-02-09 We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Y our feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: (highpowerRF@infineon.com) To request other information, contact us at: +1 877 465 3667 (1-877-GO-LDMOS) USA or +1 408 776 0600 International Edition 2017-02-09 Published by Infineon Technologies AG

85579 Neubiberg, Germany

© 2015 – 2016 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com/rfpower). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of In- fineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. PTVA043502EC/FC V1

Revision History

Revision Date Data Sheet Type Page Subjects (major changes since last revision) 01 2014-05-12 Advance All Data Sheet reflects advance specification for product development 02 2015-11-19 Production All Data Sheet reflects released product specification 02.1 2016-05-03 Production 6 Revise one manufacturer, P/N remains the same 02.2 2017-02-09 Production 2 Updated operating voltage and junction temperature