PTMC210204MD CREE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Features
- On-chip matching for broadband operation
- Typical pulsed CW performance, 1990 MHz, 28 V, combined outputs - Output power at P 1dB = 20.9 W - Efficiency = 56% - Gain = 31 dB
- Capable of handling 10:1 VSWR @28 V, 20.9 W (CW) output power
- Integrated ESD protection
- Human Body Model Class 1A (per ANSI/ESDA/ JEDEC JS-001)
- Integrated temperature compensation
- Pb-free and RoHS compliant
Description
The PTMC210204MD is a wideband, two-stage, LDMOS integrated power amplifier. It incorporates internal matching for operation from
1805 MHz to 2200 MHz, and dual independent outputs with 10 W
of output power each. It is available in an 14-lead plastic overmold package with gull wing leads. RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed test fixture) VDD = 28 V, IDQ1(A+B) = 20 mA, IDQ2(A+B) = 120 mA, POUT = 2.5 W avg, ƒ = 1990 MHz, 3GPP WCDMA signal, channel bandwidth = 3.84 MHz, peak/average = 7.5 dB @ 0.01% CCDF Characteristic Symbol Min Typ Max Unit Linear Gain Gps 28.5 30.5 33.5 dB Power Added Efficiency PAE 17 19 — % Adjacent Channel Power Ratio ACPR — –47 –40 dBc 25 30 35 40 45 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA, ƒ = 1930 MHz 3GPP WCDMA signal, 7.50 dB PAR, 3.84 MHz bandwidth Gain PAR @ 0.01% CCDF Efficiency c210204md-gr1a PTMC210204MD (formed leads) PTMC210204MD
4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 04, 2018-05-19 2PTMC210204MD DC Characteristics Stage 1 Conditions Symbol Min Typ Max Unit Drain Leakage Current VDS = 28 V, VGS = 0 V IDSS — — 0.1 µA VDS = 60 V, VGS = 0 V IDSS — — 1.0 µA Gate Leakage Current VGS = 1 V, VDS = 0 V IGSS — — 0.1 µA On-state Resistance VGS = 10 V, VDS = 0.1 V RDS(on) — 8 — Ω Operating Gate Voltage VDS = 28 V, IDQ1 = 20 mA VGS1 — 2.7 — V Fixture Operating Gate Voltage VDS = 28 V, IDQ1 = 20 mA VGS1 — 4.52 — V Stage 2 Conditions Symbol Min Typ Max Unit Drain-source Breakdown Voltage VGS = 0 V, IDS = 10 mA VBR(DSS) 65 — — V Drain Leakage Current VDS = 28 V, VGS = 0 V IDSS — — 0.1 µA VDS = 60 V, VGS = 0 V IDSS — — 1.0 µA Gate Leakage Current VGS = 1 V, VDS = 0 V IGSS — — 0.1 µA On-state Resistance VGS = 10 V, VDS = 0.1 V RDS(on) — 0.9 — Ω Operating Gate Voltage VDS = 28 V, IDQ2 = 120 mA VGS2 — 2.72 — V Fixture Opererating Gate Voltage VDS = 28 V, IDQ2 = 120 mA VGS2 — 4.74 — V Maximum Ratings Parameter Symbol Value Unit Drain-Source Voltage VDSS 65 V Gate-Source Voltage VGS –6 to +12 V Junction Temperature TJ 225 °C Storage Temperature Range TSTG –65 to +150 °C Operating Voltage VDD 0 to 32 V Thermal Characteristics Characteristic Symbol Value Unit Thermal Resistance Stage 1 (TCASE = 70°C, 10 W CW) RqJC 9.7 °C/W Stage 2 (TCASE = 70°C, 10 W CW) RqJC 3.1 °C/W Moisture Sensitivity Level Level Test Standard Package Temperature Unit
3 IPC/JEDEC J-STD-020 260 °C
4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 04, 2018-05-19 3PTMC210204MD 25 30 35 40 45 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA, ƒ = 1960 MHz 3GPP WCDMA signal, 7.50 dB PAR, 3.84 MHz bandwidth Gain Efficiency PAR @ 0.01% CCDF c210204md-gr1b 25 30 35 40 45 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA, ƒ = 1990 MHz 3GPP WCDMA signal, 7.50 dB PAR, 3.84 MHz bandwidth PAR @ 0.01% CCDF Efficiency Gain c210204md-gr1c
Ordering Information
Type and Version Order Code Package and Description Shipping PTMC210204MD V1 R5 PTMC210204MD-V1-R5 PG-HB1DSO-14-1, 14-lead, overmold Tape & Reel, 500 pcs Evaluation Boards Order Code Frequency Description LTN/PTMC210204MD V1 1930 – 1990 MHz Class AB with combined outputs, R04360, 0.508 mm thick LTN/PTMC210204MD E2 1805 – 1880 MHz Class AB with combined outputs, R04360, 0.508 mm thick LTN/PTMC210204MD E3 2110 – 2200 MHz Class AB with combined outputs, R04360, 0.508 mm thick Find Gerber files for these reference fixtures on the Wolfspeed Web site at www.wolfspeed.com/RF Typical RF Performance (data taken in production test fixture)
4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 04, 2018-05-19 4PTMC210204MD -65 -55 -45 -35 -25 -15 25 30 35 40 45 Efficiency(%) ACP Up & Low (dBc) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA, ƒ = 1990 MHz, 3GPP WCDMA signal, 7.5 dB PAR, 3.84 MHz bandwith Efficiency ACP Low ACP Up c210204md-gr2c 3010 1820 1870 1920 1970 2020 2070 2120 Drain Efficiency (%) Gain (dB) Frequency (MHz) Single-carrier WCDMA Broadband VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA, POUT = 34 dBm, 3GPP WCDMA signal, 7.5 dB PAR, 3.84 MHz BW Gain Efficiency c210204md-gr3 Typical Performance (cont.) -65 -55 -45 -35 -25 -15 25 30 35 40 45 Efficiency(%) ACP Up & Low (dBc) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA, ƒ = 1930 MHz, 3GPP WCDMA signal, 7.5 dB PAR, 3.84 MHz bandwidth Efficiency ACP Up ACP Low c210204md-gr2a -65 -55 -45 -35 -25 -15 25 30 35 40 45 Efficiency(%) ACP Up & Low (dBc) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA, ƒ = 1960 MHz, 3GPP WCDMA signal, 7.5 dB PAR, 3.84 MHz bandwidth Efficiency ACP Low ACP Up c210204md-gr2b
4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 04, 2018-05-19 5PTMC210204MD -50 -40 -30 -20 -10 -55 -50 -45 -40 -35 1820 1870 1920 1970 2020 2070 2120 Return Loss (dB) ACP (dBc) Frequency (MHz) Single-carrier WCDMA Broadband VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA, POUT = 34 dBm, 3GPP WCDMA signal, 7.5 dB PAR ACP Up Input Return Loss c210204md-gr4 25 30 35 40 45 Efficiency (%) Gain (dB) Output Power (dBm) CW Performance VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA Gain Efficiency c210204md-gr5
1930 MHz
1960 MHz
1990 MHz
Typical Performance (cont.) -40 -30 -20 -10 1850 1900 1950 2000 2050 2100 Input Return Loss (dB) Power Gain (dB) Frequency (MHz) Small Signal CW VDD = 28 V, IDQ1 = 40 mA, IDQ2 = 240 mA Gain Input Return Loss c210204md-gr7
4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 04, 2018-05-19 6PTMC210204MD Load Pull CW signal: VDD1 = VDD2 = 28 V, IDQ1 = 20 mA, IDQ2 = 120 mA P1dB Class AB Max Output Power Max PAE Freq [MHz] Zs [Ω] Zl [Ω] Gain [dB] POUT [dBm] POUT [W] PAE [%] Zl [Ω] Gain [dB] POUT [dBm] POUT [W] PAE [%] Reference Circuit, tuned for 1930 – 1990 MHz DUT PTMC210204MD V1 Test Fixture Part No. LTN/PTMC210204MD V1 PCB Rogers 4350, 0.508 mm [.020"] thick, 2 oz. copper, εr = 3.66 Find Gerber files for this reference fixture on the Wolfspeed Web site at www.wolfspeed.com/RF Reference circuit assembly diagram (not to scale) p t m c 2 1 0 2 0 4 m d _ C D _ 0 2 _ 4 - 2 9 - 2 0 1 6 RO4350, .20 MIL, 2 OZ PTMC210204MD_02 R105 R109 C113 C114 C103 C104 R101 C102 R106 C111 R102 C112 R111 R110 C207 C206 U1 C109 C110 C106 C101 C105 R103 RF_OUTRF_IN C205 C204 C208 R201 C201 C203 C202 R104 R108 C108 C107 VG2B VG1B VD1B VD2B R107 VD1A VG2A VG1A VD2A A
4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 04, 2018-05-19 7PTMC210204MD Component Information Component Description Manufacturer P/N Input C101, C103, C105, C107, C111, C113, C203, C207 Capacitor, 4.7 µF Murata Electronics North America GRM32ER71H475KA88L C102, C104, C106, C108, C112, C114, C202, C206 Capacitor, 10 µF Taiyo Yuden UMK325C7106MM-T C109, C110 Capacitor, 0.8 pF ATC ATC800A0R8CT250T C201, C204, C205, C208 Capacitor, 10 pF ATC ATC800A100JT250T R101, R103 Resistor, 0.0 ohms Panasonic Electronic Components ERJ-3GEY0R00V R102, R201 Resistor, 50 ohms Anaren C8A50Z4A R104, R105, R106, R107 Resistor, 1K ohms Panasonic Electronic Components ERJ-8GEYJ102V R108, R109, R110, R111 Resistor, 4.3K ohms Panasonic Electronic Components ERJ-8GEYJ432V U1, U2 Hybrid Coupler Anaren X3C19P1-03S Reference Circuit (cont.) Pinout Diagram VD2/RFOUT B VD1 A VG2 A VG1 A RFIN A N/C N/C N/C N/C RFIN B VG1 B VG2 B VD1B VD2/RFOUT A p t m c 2 1 0 2 0 4 m d _ P D _ 5 - 2 - 2 0 1 6 Source: plated copper heat slug on back- side of package VD2/RFOUT A VD2/RFOUT B RFIN A RFIN B
4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 04, 2018-05-19 8PTMC210204MD Package Outline Specifications (formed leads) 4X 1.02 9.02
0.52 X 45°
2X 5.30 7.65 2.35 3.83 2X 2.02 2X 0.35 1.50 2X 3.25 11X 1.00 13.06 4.00 2.62 0.10 MAX. 1.27 1.86 Z Y 12X 0.35 14.94 ± 0.15
4 X 7°
2 X 10°
19.44 VIEWÊY PG-HB1DSO-14L_01_11-06-2015 Z (5:1) R0.20 1.00 1.02 2 2 3.00 0.05 2x 0.50 6.91 3.45 16.26 18.44 0.25 0.25 5°± STAND OFF 0...0.1 0° MIN. Diagram Notes–unless otherwise specified: 1. Mold/Dam Bar/Metal protusion of 0.30mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4.Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. All tolerances ± 0.1mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron [10 microinch] max. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.30 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6 All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron max. PG-HB1DSO-14-1_01_01-16-2017
4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 04, 2018-05-19 9PTMC210204MD Package Outline Specifications (cont.) (formed leads, bottom side) 4X 1.02 9.02 2X 5.30 7.65 2.35 3.83 2X 2.02 2X 0.35 1.50 2X 3.25 11X 1.00 13.06 4.00 2.62 0.10 MAX. 1.27 1.86 Z Y 12X 0.35 14.94 ± 0.15 19.44 VIEWÊY PG-HB1DSO-14L_01_11-06-2015 Z (5:1) R0.20 1.00 1.02 2 2 3.00 0.05 2x 0.50 6.91 3.45 16.26 18.44 0.25 0.25 5°± STAND OFF 0...0.1 0° MIN. Diagram Notes–unless otherwise specified: 1. Mold/Dam Bar/Metal protusion of 0.30mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4.Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. All tolerances ± 0.1mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron [10 microinch] max. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.30 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6 All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron max. PG-HB1DSO-14-1_01_01-16-2017
www.wolfspeed.comRev. 04, 2018-05-19 Notes Disclaimer Specifications are subject to change without notice. Cree, Inc. believes the information contained within this data sheet to be accurate and reliable. However, no responsibility is assumed by Cree for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or pat- ent rights of Cree. Cree makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. “Typical” parameters are the average values expected by Cree in large quantities and are provided for information purposes only. These values can and do vary in different applications and actual performance can vary over time. All operating parameters should be validated by customer’s technical experts for each application. Cree products are not designed, intended or authorized for use as components in applications intended for surgical implant into the body or to support or sustain life, in applications in which the failure of the Cree product could result in personal injury or death or in applications for planning, construction, maintenance or direct operation of a nuclear facility. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Wolfspeed™ and the Wolfspeed logo are trademarks of Cree, Inc. For more information, please contact:
4600 Silicon Drive
Durham, North Carolina, USA 27703 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com 919.407.7816 PTMC210204MD 01 2015-12-09 Advance All Data Sheet reflects advance specification for product development. 02 2016-05-04 Production All Product released to production: firm specifications. Add further perfor- mance information, and reference circuit. 03 2016-06-14 Production 1 Revise Description. Rearrange tables, add operating voltatage. Add further evaluation boards information. 04 2018-05-19 Production All Converted to Wolfspeed Data Sheet