PTMC210124MD CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

  • On-chip matching for broadband operation
  • Typical CW performance, 2170 MHz, 28 V, com- bined outputs - Output power at P 1dB = 12 W - Gain = 30.5 dB - Efficiency = 51.9%
  • Capable of handling 10:1 VSWR @28 V, 12 W (CW) output power
  • Integrated ESD protection
  • Human Body Model Class 0B (per ANSI/ESDA/ JEDEC JS-001)
  • Integrated temperature compensation
  • Pb-free and RoHS-compliant

Description

The PTMC210124MD is a wideband, two-stage, LDMOS integrated power amplifier. It incorporates internal matching for operation from

1805 MHz to 2200 MHz, and dual independent outputs with 6 W of

output power each. It is available in a 14-lead plastic overmold pack- age with gull wing leads. RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed production test fixture) VDD = 28 V, IDQ1A = IDQ1B = 17 mA, IDQ2A = IDQ2B = 73 mA, POUT = 1.38 W avg, ƒ = 2170 MHz, 3GPP WCDMA signal, channel bandwidth = 3.84 MHz, peak/average = 7.5 dB @ 0.01% CCDF Characteristic Symbol Min Typ Max Unit Gain Gps 29 30.5 — dB Drain Efficiency hD 15 16.5 — % Adjacent Channel Power Ratio ACPR — –49.5 –47 dBc 28 30 32 34 36 38 40 42 Efficiency (%) Peak/Average Ratio, Gain (dB) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1A + IDQ1B = 34 mA, IDQ2A + IDQ2B = 148 mA, ƒ = 2170 MHz, 3GPP WCDMA signal, PAR = 7.5 dB,

3.84 MHz BW

PAR @ 0.01% CCDF Gain Efficiency ptmc210124md_g1 PTMC210124MD

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 03, 2018-05-19 2PTMA210124MD DC Characteristics (each side) Stage 1 Conditions Symbol Min Typ Max Unit Drain Leakage Current VDS = 28 V, VGS = 0 V IDSS — — 0.1 µA VDS = 60 V, VGS = 0 V IDSS — — 1 µA Gate Leakage Current VGS = 1 V, VDS = 0 V IGSS — — 0.1 µA On-state Resistance VGS = 10 V, VDS = 0.1 V RDS(on) — 10 — Ω Operating Gate Voltage VDS = 28 V, IDQ1A = IDQ1B = 17 mA VGS1 — 2.7 — V Fixture Operating Gate Voltage VDS = 28 V, IDQ1A = IDQ1B = 17 mA VGS1 — 4.9 — V Stage 2 Conditions Symbol Min Typ Max Unit Drain Leakage Current VDS = 28 V, VGS = 0 V IDSS — — 0.1 µA VDS = 60 V, VGS = 0 V IDSS — — 1 µA Gate Leakage Current VGS = 1 V, VDS = 0 V IGSS — — 0.1 µA On-state Resistance VGS = 10 V, VDS = 0.1 V RDS(on) — 1.9 — Ω Operating Gate Voltage VDS = 28 V, IDQ2A = IDQ2B = 73 mA VGS2 — 2.7 — V Fixture Opererating Gate Voltage VDS = 28 V, IDQ2A = IDQ2B = 73 mA VGS2 — 4.9 — V Maximum Ratings Parameter Symbol Value Unit Drain-Source Voltage VDSS 65 V Gate-Source Voltage VGS –6 to +10 V Junction Temperature TJ 225 °C Storage Temperature Range TSTG –65 to +150 °C Operating Voltage VDD 0 to 32 V Operation above the maximum values listed here may cause permanent damage. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. For reliable continuous operation, the device should be operated within the operating voltage range (V DD) specified above. Thermal Characteristics Characteristic Symbol Value Unit Thermal Resistance Stage 1 (TCASE = 70°C, 12 W CW) RqJC 4.8 °C/W Stage 2 (TCASE = 70°C, 12 W CW) RqJC 1.9 °C/W

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 03, 2018-05-19 3PTMA210124MD Moisture Sensitivity Level Level Test Standard Package Temperature Unit

3 IPC/JEDEC J-STD-020 260 °C

Ordering Information

Type and Version Order Code Package Description Shipping PTMC210124MD V1 R5 PTMC210124MD-V1-R5 PG-HB1DSO-14-1 Tape & Reel, 500 pcs

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 03, 2018-05-19 4PTMA210124MD Typical Performance (data taken in production test fixture) 3010 2100 2120 2140 2160 2180 2200 Efficiency (%) Gain (dB) Frequency (MHz) Single-carrier WCDMA Broadband Performance VDD = 28 V, IDQ1A + IDQ1B = 34 mA, IDQ2A + IDQ2B = 148 mA, POUT = 31.4 dBm, 3GPP WCDMA signal, PAR = 7.5 dB Efficiency Gain ptmc210124md_g3 -55 -50 -45 -40 -35 2100 2120 2140 2160 2180 2200 ACP (dBc) Frequency (MHz) Single-carrier WCDMA Broadband Performance VDD = 28 V, IDQ1A + IDQ1B = 34 mA, IDQ2A + IDQ2B = 148 mA, POUT = 31.4 dBm, 3GPP WCDMA signal, PAR = 7.5 dB ACP Low ACP Up ptmc210124md_g4 26 28 30 32 34 36 38 40 42 Efficiency (%) Gain (dB) Output Power (dBm) CW Performance VDD = 28 V, , IDQ1A + IDQ1B = 34 mA, IDQ2A + IDQ2B = 148 mA ptmc210124md_g5 2200MHz Gain 2200MHz Eff 2170MHz Gain 2170MHz Eff 2140MHz Gain 2140MHz Eff 2110MHz Gain 2110MHz Eff -65 -55 -45 -35 -25 -15 28 30 32 34 36 38 40 42 Efficiency(%) ACP Up & Low (dBc) Average Output Power (dBm) Single-carrier WCDMA Drive-up VDD = 28 V, IDQ1A + IDQ1B = 34 mA, IDQ2A + IDQ2B = 148 mA, ƒ = 2170 MHz, 3GPP WCDMA signal, PAR = 7.5 dB, BW = 3.84 MHz ACP Up ACP Low Efficiency ptmc210124md_g2

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 03, 2018-05-19 5PTMA210124MD Typical Performance (cont.) Load Pull Performance CW signal: VDD = 28 V, IDQ1A = IDQ1B = 17 mA, IDQ2A = IDQ2B = 74 mA P1dB Max Output Power Max PAE Freq [MHz] Zs [Ω] ZL [Ω] Gain [dB] P1dB [dBm] P1dB [W] PAE [%] ZL [Ω] Gain [dB] P1dB [dBm] P1dB [W] PAE [%] -40 -30 -20 -10 1800 1900 2000 2100 2200 Input Return Loss (dB) Gain (dB) Frequency (MHz) Small Signal CW Gain & Input Return Loss VDD = 28 V, IDQ1A + IDQ1B = 34 mA, IDQ2A + IDQ2B = 148 mA Input Return Loss Gain ptmc210124md_g6

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 03, 2018-05-19 6PTMA210124MD Reference Circuit, 2110 – 2200 MHz Reference circuit assembly diagram (not to scale) Reference Circuit Assembly DUT PTMC210124MD V1 Test Fixture Part No. LTN/PTMC210124MD V1 PCB Rogers 4350, 0.508 mm [0.020”] thick, 2 oz. copper, εr = 3.66, ƒ = 2110– 2200 MHz Find Gerber files for this test fixture on the Wolfspeed Web site at www.wolfspeed.com/RF Components Information Component Description Manufacturer P/N C101, C103, C105, C107, C109, C111, C203, C207 Capacitor, 4.7 µF Murata Electronics North America GRM32ER71H475KA88L C102, C104, C106, C108, C110, C112, C202, C206 Capacitor, 10 µF Taiyo Yuden UMK325C7106MM-T C201, C204, C205, C208 Capacitor, 10 pF ATC ATC800A100JT250T R101, R103 Resistor, 0.0 ohms Panasonic Electronic Components ERJ-3GEY0R00V R102, R201 Resistor, 50 ohms Anaren C8A50Z4A R104, R105, R106, R107 Resistor, 1K ohms Panasonic Electronic Components ERJ-8GEYJ102V R108, R109, R110, R111 Resistor, 4.3K ohms Panasonic Electronic Components ERJ-8GEYJ432V U1, U2 Hybrid coupler Anaren X3C21P1-03S C201 R111 C110 C203 C207 C206 R104 R108 C202 C205 C111 C204 C208 R201 C112 R105 R109 C104 C103 C102 C101R101 R102 C105 C106 R103 C108 C107 C109R107 R110 R106 PTMC210124MD_03B 2p1G, v2p0 RF_IN RF_OUT VG1B p t m c 2 1 0 1 2 4 m d _ C D _ 0 5 - 1 9 - 2 0 1 8 RO4350, 20 MIL, 2 oz VG1A VG2A VG2B VD1B VD1A VD2A VD2B

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 03, 2018-05-19 7PTMA210124MD Pinout Diagram (top view) VD2/RFOUT B VD1 A VG2 A VG1 A RFIN A N/C N/C N/C N/C RFIN B VG1 B VG2 B VD1B VD2/RFOUT A p t m c 2 1 0 2 0 4 m d _ P D _ 5 - 2 - 2 0 1 6 Source: plated copper heat slug on back- side of package VD2/RFOUT A VD2/RFOUT B RFIN A RFIN B

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 03, 2018-05-19 8PTMA210124MD Package Outline Specifications (formed leads) 4X 1.02 9.02

0.52 X 45°

2X 5.30 7.65 2.35 3.83 2X 2.02 2X 0.35 1.50 2X 3.25 11X 1.00 13.06 4.00 2.62 0.10 MAX. 1.27 1.86 Z Y 12X 0.35 14.94 ± 0.15

4 X 7°

2 X 10°

19.44 VIEWÊY PG-HB1DSO-14L_01_11-06-2015 Z (5:1) R0.20 1.00 1.02 2 2 3.00 0.05 2x 0.50 6.91 3.45 16.26 18.44 0.25 0.25 5°± STAND OFF 0...0.1 0° MIN. Diagram Notes–unless otherwise specified: 1. Mold/Dam Bar/Metal protusion of 0.30mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4.Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. All tolerances ± 0.1mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron [10 microinch] max. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.30 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6 All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron max. PG-HB1DSO-14-1_01_01-16-2017

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 03, 2018-05-19 9PTMA210124MD Package Outline Specifications (formed leads, bottom view) 4X 1.02 9.02 2X 5.30 7.65 2.35 3.83 2X 2.02 2X 0.35 1.50 2X 3.25 11X 1.00 13.06 4.00 2.62 0.10 MAX. 1.27 1.86 Z Y 12X 0.35 14.94 ± 0.15 19.44 VIEWÊY PG-HB1DSO-14L_01_11-06-2015 Z (5:1) R0.20 1.00 1.02 2 2 3.00 0.05 2x 0.50 6.91 3.45 16.26 18.44 0.25 0.25 5°± STAND OFF 0...0.1 0° MIN. Diagram Notes–unless otherwise specified: 1. Mold/Dam Bar/Metal protusion of 0.30mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4.Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. All tolerances ± 0.1mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron [10 microinch] max. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.30 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6 All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron max. PG-HB1DSO-14-1_01_01-16-2017

Revision History

Revision Date Data Sheet Type Page Subjects (major changes since last revision) 01 2016-08-18 Advance All Target specifications for proposed product 02 2017-12-14 Production All Data Sheet reflects released product specification 03 2018-05-19 Production All Converted to Wolfspeed Data Sheet www.wolfspeed.comRev. 10, 2018-05-19 Notes Disclaimer Specifications are subject to change without notice. Cree, Inc. believes the information contained within this data sheet to be accurate and reliable. However, no responsibility is assumed by Cree for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or pat- ent rights of Cree. Cree makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. “Typical” parameters are the average values expected by Cree in large quantities and are provided for information purposes only. These values can and do vary in different applications and actual performance can vary over time. All operating parameters should be validated by customer’s technical experts for each application. Cree products are not designed, intended or authorized for use as components in applications intended for surgical implant into the body or to support or sustain life, in applications in which the failure of the Cree product could result in personal injury or death or in applications for planning, construction, maintenance or direct operation of a nuclear facility. Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Wolfspeed™ and the Wolfspeed logo are trademarks of Cree, Inc. For more information, please contact:

4600 Silicon Drive

Durham, North Carolina, USA 27703 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com 919.407.7816 PTMA210124MD