PTGA090304MD

PTGA090304MD CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• On-chip matching for broadband operation
• Designed for ultra wideband performance
• Integrated temperature compensation
• Integrated ESD protection
• Pb-free and RoHS compliant

Description

The PTGA090304MD is a wideband, two-stage, LDMOS integrated power amplifier. Fabricated with Wolfspeed's 50 V LDMOS process, it incorporates internal matching for operation from 575 MHz to 960 MHz, and dual independent outputs of 15 W each. It is available in a 14-lead plastic overmold package with gull wing leads. Target RF Characteristics Single-carrier WCDMA Specifications (tested in Wolfspeed Class AB test fixture, combined outputs) VDD = 50 V, IDQ1(A+B) = 34 mA, IDQ2(A+B) = 144 mA, POUT = 36 dBm avg, ƒ = 960 MHz, 3GPP WCDMA signal, channel bandwidth = 3.84 MHz, peak/average = 10 dB @ 0.01% CCDF Characteristic Symbol Min Typ Max Unit Gain Gps — 33 — dB Drain Efficiency hD — 19 — % Adjacent Channel Power Ratio ACPR — –46 — dBc

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 02, 2018-05-01 2Advance PTGA090304MD Typical Performance, 920 – 960 MHz (tested in Wolfspeed narrowband test fixture) VDD = 50 V, IDQ1(A+B) = 34 mA, IDQ2(A+B) = 144 mA, POUT = 36 dBm avg, 3GPP WCDMA signal, channel bandwidth = 3.84 MHz, peak/average = 10 dB @ 0.01% CCDF Frequency (MHz) Gain (dB) PAE (%) ACPR (dBc) 920 33.4 19.6 –46.4 940 33.3 19.3 –46.3 960 33.2 19.1 –46.0 Typical Broadband Performance, 575 – 960 MHz (tested in Wolfspeed broadband test fixture) VDD = 50 V, IDQ1(A+B) = 34 mA, IDQ2(A+B) = 144 mA, POUT = 36 dBm avg, 3GPP WCDMA signal, channel bandwidth = 3.84 MHz, peak/average = 10 dB @ 0.01% CCDF Frequency (MHz) Gain (dB) Eff (%) PAR (dB) ACPR (dBc) 575 28.5 18.0 9.2 –38.3 590 29.6 18.1 9.2 –40.5 660 31.9 18.4 9.3 –46.2 746 30.8 17.3 9.4 –47.0 860 30.1 16.0 9.4 –46.2 960 30.2 15.1 9.2 –45.1 DC Characteristics Stage 1 Conditions Symbol Min Typ Max Unit Drain Leakage Current VDS = 48 V, VGS = 0 V IDSS — — 1 µA VDS = 105 V, VGS = 0 V IDSS — — 10 µA Gate Leakage Current VGS = 10 V, VDS = 0 V IGSS — — 1 µA On-State Resistance (Main) VGS = 10 V, VDS = 0.1 V RDS(on) — TBD — W (Peak) VGS = 10 V, VDS = 0.1 V RDS(on) — TBD — W Operating Gate Voltage (Main) VDS = 48 V, IDQ1 = 34 mA VGS1 — 5.62 — V

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 02, 2018-05-01 3Advance PTGA090304MD DC Characteristics (cont.) Stage 2 Conditions Symbol Min Typ Max Unit Drain-Source Breakdown Voltage VGS = 0 V, IDS = 10 mA V(BR)DSS 105 — — V Drain Leakage Current VDS = 48 V, VGS = 0 V IDSS — — 1 µA VDS = 105 V, VGS = 0 V IDSS — — 10 µA Gate Leakage Current VGS = 10 V, VDS = 0 V IGSS — — 1 µA On-State Resistance (Main) VGS = 10 V, VDS = 0.1 V RDS(on) — TBD — W (Peak) VGS = 10 V, VDS = 0.1 V RDS(on) — TBD — W Operating Gate Voltage (Main) VDS = 48 V, IDQ2 = 144 mA VGS2 — 5.54 — V Maximum Ratings Parameter Symbol Value Unit Drain-Source Voltage VDSS 105 V Gate-Source Voltage VGS –6 to +12 V Operating Voltage VDD 0 to +55 V Junction Temperature TJ 225 °C Storage Temperature Range TSTG –65 to +150 °C Thermal Characteristics Parameter Symbol Value Unit Thermal Resistance Stage 1 (TCASE = 70°C ) RqJC TBD °C/W Stage 2 (TCASE = 70°C ) RqJC TBD °C/W Moisture Sensitivity Level Level Test Standard Package Temperature Unit

3 IPC/JEDEC J-STD-020 260 °C

Ordering Information

Type and Version Order Code Package Shipping PTGA090304MD V1 R5 TBD PG-HB1DSO-14-1 Tape & Reel, 500 pcs

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 02, 2018-05-01 4Advance PTGA090304MD Pinout Diagram (top view) Source: plated copper heat slug on backside of package VD2/RFOUT B VD1 A VG2 A VG1 A RFIN A N/C N/C N/C N/C RFIN B VG1 B VG2 B VD1B VD2/RFOUT A p t g a 0 9 0 3 0 4 m d _ P D _ 0 2 - 0 2 - 2 0 1 8 Lead connections for PTGA090304MD Evaluation Boards Order Code Frequency Description LTN/PTGA090304MD E1 920 – 960 MHz Class AB with combined outputs, R04350 LTN/PTGA090304MD E2 728 – 768 MHz Class AB with combined outputs, R04350 LTN/PTGA090304MD E3 575 – 960 MHz Class AB with combined outputs, R04350

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 02, 2018-05-01 5Advance PTGA090304MD Package Outline Specifications 4X 1.02 9.02

0.52 X 45°

2X 5.30 7.65 2.35 3.83 2X 2.02 2X 0.35 1.50 2X 3.25 11X 1.00 13.06 4.00 2.62 0.10 MAX. 1.27 1.86 Z Y 12X 0.35 14.94 ± 0.15

4 X 7°

2 X 10°

19.44 VIEWÊY PG-HB1DSO-14L_01_11-06-2015 Z (5:1) R0.20 1.00 1.02 2 2 3.00 0.05 2x 0.50 6.91 3.45 16.26 18.44 0.25 0.25 5°± STAND OFF 0...0.1 0° MIN. Diagram Notes–unless otherwise specified: 1. Mold/Dam Bar/Metal protusion of 0.30mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4.Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. All tolerances ± 0.1mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron [10 microinch] max. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.30 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6 All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron max. PG-HB1DSO-14-1_01_01-16-2017

4600 Silicon Drive | Durham, NC 27703 | www.wolfspeed.comRev. 02, 2018-05-01 6Advance PTGA090304MD Package Outline Specifications (cont.) 4X 1.02 9.02 2X 5.30 7.65 2.35 3.83 2X 2.02 2X 0.35 1.50 2X 3.25 11X 1.00 13.06 4.00 2.62 0.10 MAX. 1.27 1.86 Z Y 12X 0.35 14.94 ± 0.15 19.44 VIEWÊY PG-HB1DSO-14L_01_11-06-2015 Z (5:1) R0.20 1.00 1.02 2 2 3.00 0.05 2x 0.50 6.91 3.45 16.26 18.44 0.25 0.25 5°± STAND OFF 0...0.1 0° MIN. Diagram Notes–unless otherwise specified: 1. Mold/Dam Bar/Metal protusion of 0.30mm max per side not included. 2. Metal protrusion are connected to source and shall not exceed 0.10mm max. 3. Fillets and radii: all radii are 0.3 mm max. 4.Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6. All tolerances ± 0.1mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron [10 microinch] max. Diagram Notes—unless otherwise specified: 1. Mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. Metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. Fillets and radii: all radii are 0.30 mm max. 4. Interpret dimensions and tolerances per ISO 8015. 5. Dimensions are mm. 6 All tolerances ± 0.1 mm unless specified otherwise. 7. All metal surfaces pre-plated, except area of cut. 8. Lead thickness: 0.25 mm. 9. Gold plating thickness: 0.25 micron max. PG-HB1DSO-14-1_01_01-16-2017

www.wolfspeed.comRev. 02, 2018-05-01 7Advance PTGA090304MD Copyright © 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Wolfspeed™ and the Wolfspeed logo are trademarks of Cree, Inc. Notes Disclaimer Specifications are subject to change without notice. Cree, Inc. believes the information contained within this data sheet to be accurate and reliable. However, no responsibility is assumed by Cree for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or pat- ent rights of Cree. Cree makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. “Typical” parameters are the average values expected by Cree in large quantities and are provided for information purposes only. These values can and do vary in different applications and actual performance can vary over time. All operating parameters should be validated by customer’s technical experts for each application. Cree products are not designed, intended or authorized for use as components in applications intended for surgical implant into the body or to support or sustain life, in applications in which the failure of the Cree product could result in personal injury or death or in applications for planning, construction, maintenance or direct operation of a nuclear facility. For more information, please contact:

4600 Silicon Drive

Durham, North Carolina, USA 27703 www.wolfspeed.com/RF Sales Contact RFSales@wolfspeed.com RF Product Marketing Contact RFMarketing@wolfspeed.com 919.407.7816

Revision History

Revision Date Data Sheet Type Page Subjects (major changes since last revision) 01 2018-03-15 Advance All Data Sheet reflects advance specification for product development 02 2018-05-01 Advance All Converted to Wolfspeed Data Sheet