ITR9702-F EVERLIGHT | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Everlight Electronics Co., Ltd. http:\\\\www.ev erlight.com Rev 1 Page: 1 of 7 Device No :CDRX-097-003 Prepared date :2006/12/28 Prepared by :Kunjiang Xie Technical Data Sheet Opto Interrupter ITR9702-F █ Features ․Fast response time ․High analytic ․Cut-off visible wavelength λp=940nm ․High sensitivity ․Pb free ․This product itself will remain within RoHS compliant version █ Descriptions ․The ITR9702-F consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black thermoplastic housing, ․The phototransistor receives radiation from the IR LED only .This is the normal situation. ․But when an object is in between , phototransistor could not receives the radiation. ․For additional component information , please refer to IR928-6C-F and PT928-6C-F █ Applications ․Mouse Copier ․Switch Scanner ․Floppy disk driver ․Non-contact Switching ․For Direct Board █ Device Selection Guide Device No. Chip Material LENS COLOR IR928-6C-F GaAlAs Water clear PT928-6C-F Silicon Water clear
Everlight Electronics Co., Ltd. http:\\\\www.ev erlight.com Rev 1 Page: 2 of 7 Device No :CDRX-097-003 Prepared date :2006/12/28 Prepared by :Kunjiang Xie ITR9702-F █ Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.2mm 3.Lead spacing is measured where the lead emerge from the package 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation . Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent 6.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets.
Everlight Electronics Co., Ltd. http:\\\\www.ev erlight.com Rev 1 Page: 3 of 7 Device No :CDRX-097-003 Prepared date :2006/12/28 Prepared by :Kunjiang Xie ITR9702-F █ Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Ratings Unit Power Dissipation at(or below) 25℃Free Air Temperature Pd 75 mW Reverse Voltage VR 5 V Forward Current IF 50 mA Input Peak Forward Current (*1) Pulse width ≦100μs, Duty cycle=1% IFP 1 A Collector Power Dissipation PC 75 mW Collector Current IC 20 mA Collector-Emitter Voltage B VCEO 30 V Output Emitter-Collector Voltage B VECO 5 V Operating Temperature Topr -25~+85 ℃ Storage Temperature Tstg -40~+85 ℃ Lead Soldering Temperature (*2) (1/16 inch form body for 5 seconds) Tsol 260 ℃ (*1) tw=100 μs e c . , T = 1 0 m s e c . ( * 2 ) t = 5 S e c █ Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Conditions Forward Voltage V F --- 1.2 1.5 V I F=20mA Reverse Current IR --- --- 10 μA VR=5V Peak Wavelength λP --- 940 --- nm IF=20mA Input View Angle 2 θ1/2 --- 40 --- Deg I F=20mA Dark C urrent I CEO --- --- 100 nA V CE=20V,Ee=0mW/cm2 Output C-E Saturation Voltage VCE(sat) --- 0.15 0.4 V IC=2mA ,Ee=1mW/cm2 IC(ON) 0.5 --- --- mACollect Current Ic(OFF) --- --- 20 μA VCE=5V IF=20mA Rise time t r --- 15 --- μsec Transfer Characteristics Fall time tf --- 15 --- μsec VCE=5V IC=1mA RL=1KΩ
Everlight Electronics Co., Ltd. http:\\\\www.ev erlight.com Rev 1 Page: 4 of 7 Device No :CDRX-097-003 Prepared date :2006/12/28 Prepared by :Kunjiang Xie -40 -20 40 2006 0 1 0 0 80 -20 0.6 0.9 0.7 0.8 1.0 -10 02 0 10
100 IF=20mA
Ta=25°C 1.1 1.2 1.3 50 75 100 120 IF=20mA 75-25 0 25 50 100 900 920 940 960 980 101 102 10 4 12 34 ITR9702-F █ Typical Electrical/Optical/Characteristics Curves for IR F i g . 1 F o r w a r d C u r r e n t v s . F i g . 2 S p e c t r a l D i s t r i b u t i o n Ambient Temperature Fig.3 Peak Emission Wavelength Fig.4 Forward Current v s . A m b i e n t T e m p e r a t u r e v s . F o r w a r d V o l t a g e F i g . 5 F o r w a r d C u r r e n t v s Fig.6 Relative Radiant Intensity vs. Ambient Temperature(°C) Angular Displacement
Everlight Electronics Co., Ltd. http:\\\\www.ev erlight.com Rev 1 Page: 5 of 7 Device No :CDRX-097-003 Prepared date :2006/12/28 Prepared by :Kunjiang Xie -25 500 25 85 75 100 100 4010 20 30 60 50 70 100 140 120 160 0.01 0.5 1 1.5 0.1 100 C 100 0.2 0.4 500300 700 Ta=25 1.0 0.6 0.8 C 1100900 1300 25 50 75 100 2 3 ITR9702-F █ Typical Electrical/Optical/Characteristics Curves for PT Fig.1Collector Power Dissipation vs. Fig.2 Spectral Sensitivity Ambient Temperature Fig.3 Relative Collector Current vs. Fig.4 Collector Current vs. Ambient Temperature Irradiance Fig.5 Collector Dark Current vs. Fig.6 Collector Current vs. Ambient Temperature Collector-Emitter Voltage
Everlight Electronics Co., Ltd. http:\\\\www.ev erlight.com Rev 1 Page: 6 of 7 Device No :CDRX-097-003 Prepared date :2006/12/28 Prepared by :Kunjiang Xie ITR9702-F █ Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level:90% LTPD :10% NO. Item Test Condition Test Hours/ Cycle Sample Size Failure Judgement Criteria Ac/Re
1 Solder Heat TEMP : 260℃ ± 5 ℃ 10 sec 22 PCs
90% of lead to be covered by soldering
2 Temperature Cycle
H : +100℃ 15 min 5 min L : -40℃ 1 5 m i n 300 cycle 22 PCs IR≧U×2 Ee≦L×0.8 VF≧U×1.2
3 Thermal Shock
H : +100℃ 5 m i n 10 sec L : -10℃ 5 m i n 300 cycle 22 PCs U :Upper specification limit L :Lower specification limit
4 High Temperature
TEMP. : +100℃ 1000 hrs 22 PCs 0/1
5 Low Temperature
TEMP. : -40℃ 1000 hrs 22 PCs 0/1
6 DC Operating Life
VCE=5V IF=20mA 1000 hrs 22 PCs 0/1
7 High Temperature /
85℃ / 85% R.H. 1000 hrs 22 PCs
Everlight Electronics Co., Ltd. http:\\\\www.ev erlight.com Rev 1 Page: 7 of 7 Device No :CDRX-097-003 Prepared date :2006/12/28 Prepared by :Kunjiang Xie ITR9702-F Packing Quantity Specification 1. 80PCS/1Plate,5Plate/1Boxe, 10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. These specification sheets include materials protect ed under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http:\\\\www.everlight.com ITR9702-F