PT8048102B-TLMWD-ER13 P-TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 40
Technical content
DESCRIPTION
10.2” TFT LCD, RTP APPROVED BY DATE
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 2 1. Table of Contents No. Contents Page
1 Table of Contents 2
2 Record of Revisions 3
3 Module Numbering System 4
4 Application 5
5 Features 5
6 General Specifications 5
7 Absolute Maximum Ratings 6
8 Electrical Characteristics 7
9 Block Diagram 11
10 Input / Output Terminals Pin Assignment 12
11 Interface Timing 16
12 Optical Characteristics 22
13 Reliability Test 25
14 Packaging 26
15 Precautions 27
16 Outline Drawing 29
17 Definition of Labels 30
18 Incoming Inspection Standards 32
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 3 2. Record of Revisions Rev. Comments Page Date 1 Preliminary Specification was first issued. All 7/27’11
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 4 3. Module Numbering System
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 5 4. Application This specification is applied to the 10.2 inch WVGA supported TFT-LCD module, and can display true 262,144 colors(6 bit/ color). The module is designed for OA, Car TV application and other electronic products which require flat panel display of digital signal interface. This module is composed of a 10.2”TFT-LCD panel, a driver circuit and LED backlight unit and used as the input devices for general electric appliances via both finger and pen-entry. 5. Features - WVGA (800×480 pixels) resolution. - Digital 18 bit parallel RGB. - Dot inversion mode with stripe type. - Transparent Touch panel
- 4-Wire
- Analog Resistive 6. General Specifications Item Specifications Unit Screen Size 10.2 (Diagonal) inch Display Format 800RGB(H)×480(V) dot Active Area 222.0(H)×132.48(V) mm Dot Pitch 0.0925(H)×0.276(V) mm Pixel Configuration RGB Vertical Stripe - Display Mode TN Type Transmissive Mode Normally White Surface Treatment Anti-Glare and Hard Coating(3H) - Viewing Direction
6 O’clock
(The Gray Inversion will appear at this direction) Outline Dimension 235.0(W)×145.8(H)×7.6(D) mm Weight (TBD) g RoHS Compliance P-TEC certifies this product to be in compliance with European Union Directive 2002/95/EC on the restriction of certain hazardous substances in electrical and electronic equipment.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 6 7. Absolute Maximum Ratings
7.1 Absolute Ratings of Environment
Item Symbol Value Unit Note Min. Max. Storage Temperature TST -30 +80 °C (1)(2) Operating Ambient Temperature TOP -20 +70 °C (1)(2) Note1: Background color changes slightly depending on ambient temperature. This phenomenon is reversible. Note2: Please refer to item of RELIABILITY .
7.2 Electrical Absolute Ratings
7.2.1 TFT-LCD Module
(Ta=25±2°C, GND=VSS=0V, Note 2) Item Symbol Value Unit Note Min. Max. Digital Power Supply Voltage VCC -0.3 5.0 V - Analog Power Supply Voltage AVDD -0.5 12.0 V - Gate High Voltage VGH 13.0 19.0 V - Gate Low Voltage VGL -12.0 -2.0 V - Gate High To Gate Low Voltage VGH - VGL - 31.0 V - Input signal voltage V1~V7 0.4 AVDD AVDD-0.1 V (1) V8~V14 -0.3 0.6 AVDD V V13 ≧V14≧AVSS + 0.1
7.2.2 LED Driver Absolute Maximum Ratings
(Ta=25±2°C, Note 2) Item Symbol Value Unit Note Min. Max. LED Reverse Voltage VR - 1.2 V Each LED (3) LED Forward Current IF - 25 mA Each LED Note 2: The absolute maximum rating values of this product are not allowed to be exceeded at any times. A module should be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme condition, the module may be permanently destroyed. Note 3: VR Conditions: Zener Diode 20mA
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 7 8. Electrical Characteristics
8.1 TFT-LCD Module
(Ta=25±2°C) Item Symbol Value Unit Note Min. Typ. Max. Digital Power Supply Voltage VCC 3.0 3.3 3.6 V - Analog Power Supply Voltage AVDD 9.0 9.2 9.4 V - Gate High Voltage VGH 15.3 16.0 16.7 V - Gate Low Voltage VGL -7.7 -7.0 -6.3 V - Input signal voltage VCOM 3.65 3.85 4.05 V - V1~V7 0.4 AVDD - AVDD-0.1 V - V8~V14 0.1 - 0.6 AVDD V - Digital Power Supply Current ICC - 4 10.0 mA (1) Analog Power Supply Current IAIDD - 25.0 50.0 mA (1) Gate High Current IGH - 0.3 0.5 mA (1) Gate Low Current IGL - 0.2 1.0 mA (1) Input High logic Voltage VIH 0.7 VCC - VCC V - Input Low logic Voltage VIL 0 - 0.3 VCC V - VSYNC Frequency FV - 60 - Hz - DCLK Frequency DCLK - 40 - MHz - Note (1) The specified power consumption is under the conditions at VCC =3.3V, AVDD =9.2V, VGH =16.0V, VGL =-7.0V, VCOM =3.85V ,FV=60Hz, whereas a power dissipation check pattern below is displayed. Active Area Black Pattern / 0 Gray
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 8
8.2 Backlight Unit
(Ta=25±2°C) Item Symbol Value Unit Note Min. Typ. Max. Current of Backlight Unit IB 180 200 220 mA - Voltage of Backlight Unit VB 8.4 9.3 10.5 V (1) Power Consumption PBL - (1.86) - W - LED Life Time(25℃) - 20000 - - hr (2) Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and IL =200mA. Note 2: The “LED life time” is defined as the module brightness decrease to 50% original brightness at Ta=25℃ and IL =200mA. The LED lifetime could be decreased if operating IL is lager than 200 mA.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 9
8.3 Transparent Touch panel
Electrical characteristics
Min. Typ. Max. Operating Voltage 3 - 5 V - Terminal Resistance X-direction 400 - 1050 Ω At connector Y-direction 150 - 500 Ω At connector Insulation Resistance > 10MΩ At DC25V Chatting ≦ 10 ms At connector Linearity ≦2.0% (1)
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 10
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 11 9. Block Diagram
9.1 TFT-LCD Module with Backlight Unit
800 x (RGB) x 480 Pixel R0~R5 G0~G5 B0~B5 POL STVD OEV CKV STVU GND EDGSL VCC V1~V14 U/D VCOM AVDD VGH VGL STHL REV DCLK STHR LD R/L Source driver with build-in Timing ControllerGate driver B/L VLED+ VLED- TOUCH PANEL YU XR YD XL
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 12 10. Input / Output Terminals Pin Assignment
10.1 TFT-LCD Module
FPC connector is used for the module electronics interface. The recommended model is “AF 730L-A2G1T” manufactured by P-TWO.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 13 I: input, O: output, P: Power
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 14 Note 1: Selection of scanning mode Note 2: Definition of scanning direction. Refer to the figure as below: Note 3: When REV=”L” , normally REV=”H”, these data will be inverted.
10.2 Backlight Unit Section
LED Light Bar connector is used for the the integral backlight system. The recommended model is “BHSR-02VS-1” manufactured by JST.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 15
10.3 Transparent Touch Panel
Connector: CVILUX CF25041D0R0-10 Pin No. Symbol 1 YU 2 XR 3 YD 4 XL
10.4 Color Data Input Assignment
The brightness of each primary color(red, green and blue) is based on the 6 bit gray scale data input for the color. The higher the binary input, the brighter the color. The table provides the assignment of color versus data input. Color Data Signal Red Green Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Gray Scale Of RED Red(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Gray Scale Of Green Green(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 Green(61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 Green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 Green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Gray Scale Of Blue Blue(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 Blue(61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 Blue(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 Blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 16 11. Interface Timing
11.1 Input Signal Characteristics
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 17
11.2 Power Sequence
Power on: Power off: Note: Data includes POL, STVD, OEV, CKV, STVU, EDGSL, STHL, REV, DCLK, STHR, LD.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 18
11.3 Waveform
Fig.11.3-1 operation model 1 Fig.11.3-2 operation model 2
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 19 Fig.11.3-3 Horizontal timing 1 Fig.11.3-4 Horizontal timing 2
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 20 Fig.11.3-5 Vertical shift clock timing Fig.11.3-6 Vertical timing (from up to down)
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 21 Fig.11.3-7 Vertical timing
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 22 12. Optical Characteristics The optical characteristics should be measured in a dark environment (≦ 1 lux) or equivalent state with the methods shown in Note (4). Item Symbol Conditions Min. Typ. Max. Unit Note Contrast Ratio CR x=0, Y =0 Viewing Normal Angle 250 (300) - - (2) Response Time TR - 15 30 ms (3) TF - 20 40 ms Luminance(Center) Y 210 (270) - cd/m2 (4) Brightness uniformity BUNI 70 (75) - ％ (5) Color Chromaticity White Wx (TBD) (TBD) (TBD) - (1),(4) Wy (TBD) (TBD) (TBD) - Viewing Angle Horizontal x+ CR10 55 (65) - deg. x- 55 (65) - Vertical Y+ 35 (45) - Y- 55 (65) -
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 23 Note (1) Definition of Viewing Angle (x, y): Note (2) Definition of Contrast Ratio (CR): Note (3) Definition of Response Time (TR, TF): 12 o’clock direction y+ = 90º 6 o’clock y- = 90º x x y- x+ Normal x = y = 0º X+ = 90º X- = 90º 100% 90% 10% White Black White Time TF Optical Response TR
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 24 Note (4) Measurement Set-Up: The LCD module should be stabilized at a given temperature for 30 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a windless room. Note (5) Definition of brightness uniformity Brightness uniformity=(Min Luminance of 9 points)/(Max Luminance of 9 points)×100% Photometer (TOPCON BM-7 Fast) Field of View = 1º 500 mm LCD Module LCD Panel Center of the Screen Light Shield Room (Ambient Luminance < 1 lux)
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 25 13. Reliability Test
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 26 14. Packaging 1CORRUGAT ED PAPER512.0x349.0x226.0PART IT ION PRODUCT 235.0x145.8x7.6 256 530.0X355.0X255.0CART ON A/S BAG 256.0x203.0x0.07 CORRUGAT ED BAR 512.0x370.0x7.0 Q.T .YMAT ERIAL PART S LIST SIZE(LxWxH) unit:mm 900.0x700.0x0.05 NOT EIT EM DUST - PROOF BAG CORRUGAT ED PAPER PE PE CORRUGAT ED PAPER
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 27 15. Precautions
15.1 Assembly and Handling Precautions
(1) Do not apply rough force such as bending or twisting to the module during assembly. (2) It’s recommended to assemble or to install a module into the user’s system in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) Don’t apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight. (4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the damage and latch-up of the CMOS LSI chips. (5) Do not plug in or pull out the I/F connector while the module is in operation. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) Moisture can easily penetrate into LCD module and may cause the damage during operation. (9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD module in the specified storage conditions. (10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the response time will become slow.
15.2 Safety Precautions
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (2) After the module’s end of life, it is not harmful in case of normal operation and storage.
15.3 Terms of Warrant
(1) Acceptance inspection period The period is within one month after the arrival of contracted commodity at the buyer’s factory site. (2) Applicable warrant period The period is within twelve months since the date of shipping out under normal using and storage conditions.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 28
15.4 Cautions for installing and assembling
Bezel edge must be positioned in the area between the Active area and View area. The bezel may press the touch screen and cause activation if the edge touches the active area. A gap of approximately 0.5mm is needed between the bezel and the top electrode.It may cause unexpected activation if the gap is too narrow. There is a tolerance of 0.2 to 0.3mm for the outside dimensions of the touch panel and tail. A gap must be made to absorb the tolerance in the case and connector.
15.5 Operation Prohibit
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 29 16.Outline Drawing
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 30 17.Definition of Labels The bar code nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a) Module Name: PT8048102B-TLMWD-ER13 (b) Serial ID: A B C D E F G H I J K L M Serial No. Revision Code Factory Code Manufactured Date Screen Size Serial ID includes the information as below: (a) Screen size (Diagonal): Inch Code (ABCD) 3.5” → 0350 10.4” → 1040 (b) Manufactured Date: Year, Month, Day (EFG) Year (E) Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Mark 0 1 2 3 4 5 6 7 8 9 Year 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Mark A B C D E F G H I J PT8048102B-TLMWD-ER13
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 31 Month (F) Mark 1 2 3 4 5 6 7 8 9 A B C Day (G) Day 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Mark 1 2 3 4 5 6 7 8 9 A B C D E F G Day 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Mark H I J K L M N O P Q R S T U V (c) Factory Code (H): For P-TEC internal use. (d) Revision Code (I): Cover all the change, for example: 1: Rev.1, 2: Rev.2, 3: Rev.3…etc. (e) Serial No. (JKLM): Manufacturing sequence of product, for example: 0001~9999.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 32 18. Incoming Inspection Standards
18.1 Inspection Parameters
- Incoming Inspection Both parties agree that the inspection specifications of TFT-LCD Modules (hereinafter known as "Modules") stipulated hereunder is the only and final standard applicable in the process of inspection. P-TEC shall be under no liability or obligation (including incidental loss, products liability or other consequential loss) whatsoever for any defect in quality or performance or shortage in quantity of the Modules that have passed such inspection. 2. Liability
2.1 Inspection Deadline
The Customer should inspect the Modules either at the Delivery Point or within twenty (20) calendar days after arrival at the Delivery Destination.
2.2 Notification of Rejection
The Customer may reject one or more defective or non-conforming Modules if the Modules fail to meet the AQL (Acceptable Quality Level) and pass the inspection. In that case, the customer should notify P-TEC of the rejection by either documents or mail within in three (3) business days from the date of reception of the Modules. Otherwise, the Modules shall be deemed to have met the AQL and passed the inspection. 3. Inspection Specifications Both parties agree that the inspection shall contain and follow the inspection specifications stipulated in the attachment, including:
3.1 Scope
3.2 Sampling Plan
3.3 Panel Inspection Condition
3.4 Display Quality
3.5 Mechanics Specifications
3.6 Notification for Storage Handling
- Limited Warranty P-TEC represents and warrants that all Modules shall (i) conform to the specifications set hereunder, and (ii) be free from any defects in material and workmanship for twelve (12) months after the Customer’s acceptance or deemed acceptance. P-TEC will replace, rework or refund the Customer for the defective or non-conforming Modules at P-TEC’s option, provided that the Customer (i) promptly informs P-TEC of the defects or non-conformities within the warranty period, (ii) complies with the specifications and conditions hereunder, and (iii) complies with P-TEC’s procedure for Modules replacement, reworking and/or return. The warranty period for the Modules replaced
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 33 or reworked shall be the remaining term for such Modules. 5. THE WARRANTIES AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, TERMS OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. P-TEC’S WARRANTIES HEREIN APPLY ONLY TO THE CUSTOMER AND ARE NOT TO BE EXTENDED TO ANY THIRD PARTY. 6. Governing Law This Agreement shall be governed and construed in accordance with the laws of the Republic of China. Both parties agree to submit any dispute, which cannot be amicably resolved, to Hsinchu District Court for the first instance.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 34
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 35
4.2 Bright/Dark Dots:
Defect Type Specification Major Minor Bright Dots N3 ● Dark Dots N4 ● Total Bright and Dark Dots N6 ●
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 36
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 37 Item Specification/Description Note Touch Panel Scratch L(mm) W(mm) Acceptable number Note:1 L≦10 W＜0.05 Disregard 0.05≦W＜0.1 N≦4 W≧0.1 0 Foreign Materials (Linear shape) L≦10 W＜0.05 Disregard Note:1 0.05≦W＜0.1 N≦3 W≧0.1 0 Foreign Materials (Circular shape) Dimension(mm) Acceptable number Note:2 D≦0.25 Disregard 0.25＜D≦0.5 N≦6 D＞0.5 0 Glass chipping a≦5.0mm b≦3.0mm c≦t (t：Glass think) Note:3 a≦3.0mm b≦3.0mm c≦t (t：Glass think) Note:3 Newton-ring (In case of doubtful situations) Observe on 60° from the product surface under a while Fluorescent lamp (3-wavelength lamp). Average diameter ≦1/3 Touch Panel area Disregard. Note:3 Membrane Drum H≦0.4mm
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 38 Note1. W L Note2. D：Diameter D=(a+b)/2 Note3. A area : Without any defect point effect on normal operation. B area : None-specify
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 39 6. Notification for Storage Handling
6.1 Storage:
6.1.1 Enviroment condition must be within the product specifications,otherwise the Module
might be damaged. 6.1.2 Pile of stacking shall follow the instruction of P-TEC.
6.2 Handling:
6.2.1 Twisting or Bending of the Module is prohibited. 6.2.2 All chemicals are unfit for use unless otherwise instructed by P-TEC.
6.2.3 Plugging in & unplugging:
The power must be turned off before plugging in or unplugging the Module.
6.2.4 ESD protection:
The Module must not be touched without proper grounding.
6.2.5 High Voltage:
The rear side of Module must not be touched without protection.
6.2.6 Power sequence:
Shall follow the instruction of P-TEC.
MODEL NO. PAGE PT8048102B-TLMWD-ER13 SPEC ONL Y 40
18.2 Handling of LCM
(1)Don't give external shock. (2)Don't apply excessive force on the surface. (3)Liquid in LCD is hazardous substance. Must not lick and swallow. when the liquid is attach to your hand, skin, cloth etc. Wash it out thoroughly and immediately. (4)Don't operate it above the absolute maximum rating. (5)Don't disassemble the LCM.