PT1076104A-MLMWF-EC03 P-TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 33
Technical content
DESCRIPTION
10.4” TFT LCD, USB PCT APPROVED BY DATE
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 2 1. Table of Contents No. Contents Page
1 Table of Contents 2
2 Record of Revisions 3
3 Module Numbering System 4
4 Application 5
5 Features 5
6 General Specifications 5
7 Absolute Maximum Ratings 6
8 Electrical Characteristics 7
9 Block Diagram 10
10 Input / Output Terminals Pin Assignment 11
11 Interface Timing 14
12 Optical Characteristics 18
13 Reliability Test 21
14 Packaging 22
15 Precautions 23
16 Outline Drawing 25
17 Definition of Labels 26
18 Incoming Inspection Standards 28
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 3 2. Record of Revisions Rev. Comments Page Date 1 Preliminary Specification was first issued. All 2/25’14
2 Modify 6 General Specifications 5 5/5’14
2 Modify 8.3 Projected Capacitive Touch 9 5/5’14 3 Modify 10.3 Projected Capacitive Touch 12 11/3’14
3 Modify 16 Outline Drawing 24 11/3’14
4 Modify 1 Table of Contents 2 7/1'15
4 Modify 9 Block Diagram 10 7/1'15
4 Modify 15 Precautions 24 7/1'15
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 4 3. Module Numbering System
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 5 4. Application This specification is applied to the 10.4 inch XGA supported TFT-LCD module, and can display true 16.2M colors (6-bits colors with FRC). The module is designed for OA, Car TV applic ation and other electronic products which require flat panel display of digital signal interfa ce. This module is composed of a 10.4” TFT-LCD panel, a driver circuit and backlight unit and used as the input devices for general electric appliances via both finger and Capacitive stylus pen. 5. Features - XGA (1024×768 pixels) resolution. - 6 bit & 8 bit LVDS Interface - Dot inversion mode with stripe type. - MVA type - Projected Capacitive Touch USB Interface Multi Touch (Ten points) 6. General Specifications Item Specifications Unit Screen Size 10.4 (Diagonal) inch Display Format 1024RGB(H)×768(V) dot Active Area 210.4(H)×157.8(V) mm Pixel Pitch 0.0685(H)×0.2055(V) mm Pixel Configuration RGB Vertical Stripe - Display Mode VA Type Transmissive Mode Normally Black Surface Treatment Clear(7H) - Viewing Direction Full view angle - Outline Dimension 238.6(W)×175.8(H)×10.09(D) mm Weight 501.5 g RoHS Compliance P-TEC certifies this product to be in compliance with European Union Directive 2011/65/EU on the restriction of certain hazardous substances in electrical and electronic equipment.
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 6 7. Absolute Maximum Ratings
7.1 Absolute Ratings of Environment
Item Symbol Value Unit Note Min. Max. Storage Temperature TST -20 +70 °C (1)(2) Operating Ambient Temperature TOP -20 +70 °C (1)(2)
7.2 Electrical Absolute Ratings
7.2.1 TFT-LCD Module
7.2.2 LED
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Note (2) Specified values are for LED light ba (Refer to 8.2 for further information).
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 7 8. Electrical Characteristics
8.1 TFT-LCD Module
(Ta=25±2°C) ITEM SYMBOL MIN TYP MAX UNIT NOTE Power Supply Voltage VCC 3.0 3.3 3.6 V (1) Rush Current Irush - - 4.0 A (2) Power Supply Current White ICC 530 570 620 mA (3) Black 380 420 460 mA Power Consumption PL - 1.9 - W LVDS Differential Input voltage |VID| 100 - 600 mV - LVDS Common Mode Voltage VICM 0.7 - 1.6 V -
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 8 Note (3) The specified power consumption is under the conditions at Vcc=3.3V ,FV=60Hz, whereas a power dissipation check pattern below is displayed.
8.2 Backlight Unit
(Ta=25±2°C) Note (1) LED current is measured by utilizing a high frequency current meter as shown below: Note (2) At 190 ~1KHz PWM control frequency, duty ratio range is restricted from 2% to 100%. 1K ~20KHz PWM control frequency，minimum duty on-time ≧ 20 us. Note (3) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta = 25 ±2 ℃ and ILED = 20mADC(LED forward current) until the brightness becomes ≦ 50% of its original value. Operating LED under high temperature environment will reduce life time and lead to color shift.
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 9
8.3 Projected Capacitive Touch
Min. Typ. Max. Operating Voltage VDD 4.8 5.0 5.2 V - Output High Threshold Voltage VOH 2.8 - - V - Output Low Threshold Voltage VOL - - 0.8 V - Differential Input Sensitivity |(D+)-(D-)| VDI 0.2 - - V - Differential Input Common Mode Range VCM 0.8 - 2.5 V Power Supply Current IDD - 31.2 43.7 mA (1) Power Consumption PL - 156.0 218.5 mW @5.0V Interface USB - Function Multi Touch - Note (1) This test condition is touched with 10 points.
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 10 9. Block Diagram
9.1 TFT-LCD Module with Backlight Unit
1024(RGB) x 768 Pixel Source driver with build-in Timing ControllerGate driver DC/DC B/L LVDS Receiver RX3+, RX3- RX2+, RX2- RX1+, RX1- RX0+, RX0- RPFI GND SEL6/8 VCC LED DRIVER Vi ADJ EN VGND 2RXCLK+, RXCLK- GND VDD GND Projected Capacitive Touch
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 11 10. Input / Output Terminals Pin Assignment
10.1 TFT-LCD Module
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 12
10.2 Backlight
10.3 Projected Capacitive Touch
Connector：CVILUX CI0105M1HR0-NH No. Symbol Functions 1 VDD +5.0V power supply.
2 D- USB D-
3 D+ USB D+
4 GND System ground.
5 NC Not Connection
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 13
10.4 Color Data Input Assignment
The brightness of each primary color(red, green and blue) is based on the 8 bit gray scale data input for the color. The higher the binary input, the brighter the color. The table provides the assignment of color versus data input. Color Data Signal Red Green Blue R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Basic Colors Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Gray Scale Of RED Red(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(1) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(2) 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(253) 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Gray Scale Of Green Green(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 Green(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 Green(253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 Green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Gray Scale Of Blue Blue(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 Blue(253) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 Blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 14 11. Interface Timing
11.1 Input Signal Characteristics
Note (1) Since this assembly is operated in DE only mode, Hsync and Vsync input signals should be set to low logic level. Otherwise, this assembly would operate abnormally. (2) Frame rate is 60Hz
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 15
11.2 The Input Data Format
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 16
11.3 Power Sequence
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 17
11.4 Scanning Direction
The following figures show the image see from the front view. The arrow indicates the direction of scan. RPFI = Low/floating; normal display (default) RPFI = high: display with 180degree rotation
11.5 USB Interface
11.5.1 Single Touch Function
Single Touch Function works with plug’n play under system Windows 2000, Windows XP and Windows7. For other operating systems like Linux a driver must be programmed.
11.5.2 Multi Touch Function
The Multi Touch Function works with plug’n play under system Windows7. For older Windows systems or other operating systems a driver must be programmed.
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 18 12. Optical Characteristics The optical characteristics should be measured in a dark environment (≦ 1 lux) or equivalent state with the methods shown in Note (4). Item Symbol Conditions Min. Typ. Max. Unit Note Contrast Ratio CR x=0, Y =0 Viewing Normal Angle 700 1000 - - (2) Response Time TR +TF - 25 35 ms (3) Luminance(Center) Y 260 310 - cd/m2 (4) White Variation δW - - 1.4 (5) Color Chromaticity Red Rx 0.560 0.610 0.660 - (1),(4) Ry 0.315 0.365 0.415 - Green Gx 0.291 0.341 0.391 - Gy 0.514 0.564 0.614 - Blue Bx 0.097 0.147 0.197 - By 0.037 0.087 0.137 - White Wx 0.263 0.313 0.363 - Wy 0.279 0.329 0.379 - Viewing Angle Horizontal x+ CR10 80 88 - deg. x- 80 88 - Vertical Y+ 80 88 - Y- 80 88 -
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 19 Note (1) Definition of Viewing Angle (x, y): Note (2) Definition of Contrast Ratio (CR): Note (3) Definition of Response Time (TR, TF): 12 o’clock direction y+ = 90º 6 o’clock y- = 90º x x y- x+ Normal x = y = 0º X+ = 90º X- = 90º 100% 90% 10% White Black White Time TF Optical Response TR
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 20 Note (4) Measurement Set-Up: The LCD module should be stabilized at a given temperature for 30 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a dark room or equivalent condition. Note (5) Definition of White Variation (δW)： Measure the luminance of gray level 255 at 5 points δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)] Photometer (TOPCON BM-7 Fast) Field of View = 1º 500 mm LCD Module LCD Panel Center of the Screen Light Shield Room (Ambient Luminance < 1 lux)
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 21 13. Reliability Test
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 22 14. Packaging
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 23 15. Precautions
15.1 Assembly and Handling Precautions
(1) Do not apply rough force such as bending or twisting to the module during assembly. (2) It’s recommended to assemble or to install a module into the user’s system in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) Don’t apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight. (4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the damage and latch-up of the CMOS LSI chips. (5) Do not plug in or pull out the I/F connector while the module is in operation. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) Moisture can easily penetrate into LCD module and may cause the damage during operation. (9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD module in the specified storage conditions. (10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the response time will become slow.
15.2 Safety Precautions
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (2) After the module’s end of life, it is not harmful in case of normal operation and storage.
15.3 Terms of Warrant
(1) Acceptance inspection period The period is within one month after the arrival of contracted commodity at the buyer’s factory site. (2) Applicable warrant period The period is within twelve months since the date of shipping out under normal using and storage conditions.
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 24
15.4 Caution
This P-TEC LCD module has been specifically designed for use only in electronic devices in the areas of audio control, office automation,industrial control, home appliances, etc. The modules should not be used in applications where module failure could result in physical harm or loss of life, and P-TEC expressly disclaims any and all liability relating in any way to the use of the module in such applications.
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 25 16.Outline Drawing
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 26 17.Definition of Labels The bar code nameplate is pasted on each module as illustration, and its definitions are as following explanation. ABCDEFGHIJKL VGG107603-0TMLWA （a） Module Name：PT1076104A-MLMWF-EC03 （b） Serial ID： A B C D E F G H I J K L Serial No. Factory Code Manufactured Date Screen Size Serial ID includes the information as below： （a） Screen size （Diagonal）： Inch Code （ABCD） 3.5” → 0350 10.4” → 1040 （b） Manufactured Date： Year, Month, Day （EFG） Year （E） Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Mark 0 1 2 3 4 5 6 7 8 9 Year 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Mark A B C D E F G H I J PT1076104A-MLMWF-EC03
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 27 Month （F） Mark 1 2 3 4 5 6 7 8 9 A B C Day （G） Day 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Mark 1 2 3 4 5 6 7 8 9 A B C D E F G Day 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Mark H I J K L M N O P Q R S T U V For P-TEC internal use. Manufacturing sequence of product, for example： 0001~9999.
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 28 18. Incoming Inspection Standards
18.1 The environmental condition of inspection
1.Description These inspection standards shall be applied to LCD Module supplied by P-TEC ELECTRONICS LTD. 2.The environmental condition of inspection The environmental condition and visual inspection shall be conducted as below. (1) Ambient temperature_15~25℃ (2) Humidity_25~75 %RH (3) External appearance inspection shall be conducted by using a single 20W fluorescent lamp or equivalent illumination. (4) Panel visual inspection on the operation condition for cosmetic shall be conducted at the Distance 35cm or more between the LCD module and eyes of inspector. Ambient Illumination_300 ~ 500 Lux for external appearance inspection Ambient Illumination_100 ~ 200 Lux for light on inspection (5) The viewing angle_ a) 15 degree to the front surface of display panel in vertical direction. b) 45 degree to the front surface of display panel in horizontal direction. (6) ND filter shall be conducted at the distance 2 cm to front surface of display panel and shall be conducted at the distance 35 cm between the LCD module and eyes of inspector.
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 29
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 30
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 31
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 32 Incoming Inspection Touch Panel
MODEL NO. PAGE PT1076104A-MLMWF-EC03 SPEC & SAMPLE 33
18.2 Handling of LCM
(1)Don't give external shock. (2)Don't apply excessive force on the surface. (3)Liquid in LCD is hazardous substance. Must not lick and swallow. when the liquid is attach to your hand, skin, cloth etc. Wash it out thoroughly and immediately. (4)Don't operate it above the absolute maximum rating. (5)Don't disassemble the LCM.