PT7M6118 PERICOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Features
Highly accurate: 1.5% (25° C) Low power consumption: 1μA @ 3.6V Vcc Detect voltage range: 1.8 to 5V in 100mV increments Operating voltage range: 1.2V ~ 5.5V Operating temperature range: -40° C to + 85° C Detect volta ge accuracy over temperature: 2.5% Typ Output configuration: N -channel open drain or CMOS
Description
The PT7M61xx serials of ultra -low-power voltage detectors monitor battery, power -supply and system voltages. Each circuit includes a precision b andgap reference, a comparator, internally trimmed resistor networks that set specified trip thresholds, and an internal 1% and 5% threshold hysteresis circuit. Output is asserted when V CC falls below the internal V TH- and remains asserted until V CC rises above V TH+ (VTH+ = VTH-×1.05). These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring nominal system voltages from +1.8V to +5V in 100mV increments. The series are voltage detecto rs with a propagation delay of 17µ s. The family is available with three output stage options: push-pull with active -low output, push -pull with active- high output, and open drain with active -low output. These devices specified over the -40° C to +85° C temperature range. Pin Configuration
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector Pin Description Name Type Description RST O 111 Reset Output (PT7M61xxCL/NL): RST is asserted when VCC drops below voltage threshold VTH-. Active low. RST O Reset Output (PT7M61xxCH). RST is asserted when VCC drops below voltage threshold VTH-. Active high. GND P Ground VCC P Supply Voltage. Block Diagram Block Diagram of PT7M61xxCL/CH Block Diagram of PT7M61xxNL Reference Voltage 1.25V GND Vcc RST Reference Voltage 1.25V GND Vcc RST / (RST) (RST is for 61xxCH only)
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector Maximum Ratings (VCC = 1.2V to 5.5V, TA= -40~85º C, unless otherwise noted. Typical values are at TA = +25º C) Description Sym. Test Conditions Min Typ Max Unit Supply Voltage VCC TA= 0~70ºC 1.0 - 5.5 V Supply Current ICC VCC = 5V. No load. - 1.3 3.6 µA Output Driving Output high VOH VCC ≥ 1.8V, Isource = 1mA 0.8× Vcc - - V VCC ≥ 2.5V, Isource = 3mA 0.8× Vcc - - VCC ≥ 4.5V, Isource = 8mA 0.8× Vcc - - Output low VOL VCC ≥ 1.2V, Isink = 1mA - - 0.3 V VCC ≥ 2.5V, Isink = 4mA - - 0.3 VCC ≥ 4.5V, Isink = 9mA - - 0.4 Open-Drain Output Leakage Current ILKG - - - 1 A Voltage Threshold VTH- +25C (VTH-) 0.985 VTH- (VTH-) 1.015 V -40C~85C (VTH-) 0.975 VTH- (VTH-) 1.025 VTH+ +25C (VTH+) 0.985 VTH+ (VTH+) 1.015 -40C~85C (VTH+) 0.975 VTH+ (VTH+) 1.025 voltage threshold Hysteresis VHYST VHYST = [(VTH+)-(VTH-)]/(VTH-) 100% 3 4.5 6 % - 1 - Note: VTH+ = 1.05 VTH- 。VTH- is voltage threshold when Vcc falls from high to low. VTH＋is voltage threshold when Vcc rises from low to high. Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other condi- tions above those indicated in the operational sec- tions of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector Timing diagram (VCC = 1.2V to 5.5V, TA= -40~85º C, unless otherwise noted. Typical values are at TA = +25º C) Sym. Description Test Conditions Min Typ Max Unit tRP Timeout Period - - - 200 s tP Delay - - 50 - s toverdrive VCC Maximum Transient Duration Reset threshold overdrive=500mV (VCC-Vth=-500mV) - 20 - s Typical Operation Circuit PT7M61xxNL Application Example Please use N-ch open drains configuration, when a resistor RIN is connected between the VCC pin and power source VIN. In such cases, please ensure that RIN is less than 10k and that C is more than 0.1F. RL could be 1kto 510k. PT7M61xxNL VIN Vcc RST GND RL VCC tRP RST tRP RST (PT7M61xxCH) VTH+ VTH- tP tP VTH+ = 1.05 x VTH-
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector Mechanical Information TA3 (SOT23-3) SYMBOL MIN MAX A 1.05 1.25 A1 0.00 0.10 A2 1.05 1.15 b 0.30 0.50 c 0.10 0.20 D 2.82 3.02 E 1.50 1.70 E1 2.65 2.95 e e1 1.80 2.00 L 0.30 0.60 θ 0° 8° PKG. DIMENSIONS(MM) 0.95BSC Note: 1) Controlling dimensions in millimeters.
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector TA5 (SOT23-5) SYMBOL MIN MAX A 1.05 1.25 A1 0.00 0.10 A2 1.05 1.15 b 0.30 0.50 c 0.10 0.20 D 2.82 3.02 E 1.50 1.70 E1 2.65 2.95 e e1 1.80 2.00 L 0.30 0.60 θ 0° 8° PKG. DIMENSIONS(MM) 0.95BSC Note: 1) Controlling dimensions in millimeters. 2) Ref: JEDEC MO-178C/AA
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector C3 (SC70-3) SYMBOL MIN MAX A 0.90 1.10 A1 0.00 0.10 A2 0.90 1.00 b 0.20 0.40 c 0.08 0.15 D 2.00 2.20 E 1.15 1.35 E1 2.15 2.45 e e1 1.20 1.40 L 0.26 0.46 θ 0° 8° PKG. DIMENSIONS(MM) 0.65TYP Note: 1) Controlling dimensions in millimeters.
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector C4 (SC70-4) SYMBOL MIN MAX A 0.90 1.10 A1 0.00 0.10 A2 0.90 1.00 b 0.15 0.35 c 0.08 0.15 D 2.00 2.20 E 1.15 1.35 E1 2.15 2.45 e e1 1.20 1.40 L 0.26 0.46 θ 0° 8° PKG. DIMENSIONS(MM) 0.65TYP Note: 1) Controlling dimensions in millimeters. 2) Ref: JEDEC MO-203
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector XV (UDFN1.6x1.6-4L) SYMBOL MIN MAX A 0.45 0.55 A1 0.00 0.05 D 1.55 1.65 E 1.55 1.65 b 0.20 0.30 DATE: 11/01/2012 Note: e 1) Ref: JEDEC MO-236 L 0.25 0.35 PKG. DIMENSIONS(MM)
0.11 REF
0.50 TYP
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector
Ordering Information
Part Number Package Code Package PT7M61xxCLTA3E TA3 Lead free and Green SOT23-3 PT7M61xxCLTA5E TA5 Lead free and Green SOT23-5 PT7M61xxCLC3E C3 Lead free and Green SC70-3 PT7M61xxCLC4E C4 Lead free and Green SC70-4 PT7M61xxCHTA3E TA3 Lead free and Green SOT23-3 PT7M61xxCHTA5E TA5 Lead free and Green SOT23-5 PT7M61xxCHC3E C3 Lead free and Green SC70-3 PT7M61xxCHC4E C4 Lead free and Green SC70-4 PT7M61xxNLTA3E TA3 Lead free and Green SOT23-3 PT7M61xxNLTA5E TA5 Lead free and Green SOT23-5 PT7M61xxNLC3E C3 Lead free and Green SC70-3 PT7M61xxNLC4E C4 Lead free and Green SC70-4 PT7M61xxCLETA3E TA3 Lead free and Green SOT23-3 PT7M61xxCLETA5E TA5 Lead free and Green SOT23-5 PT7M61xxCLEC3E C3 Lead free and Green SC70-3 PT7M61xxCLEC4E C4 Lead free and Green SC70-4 PT7M61xxCHETA3E TA3 Lead free and Green SOT23-3 PT7M61xxCHETA5E TA5 Lead free and Green SOT23-5 PT7M61xxCHEC3E C3 Lead free and Green SC70-3 PT7M61xxCHEC4E C4 Lead free and Green SC70-4 PT7M61xxNLETA3E TA3 Lead free and Green SOT23-3 PT7M61xxNLETA5E TA5 Lead free and Green SOT23-5 PT7M61xxNLEC3E C3 Lead free and Green SC70-3 PT7M61xxNLEC4E C4 Lead free and Green SC70-4 PT7M61xxNLEXVE XV Lead Free and Green DFN1.6X1.6-4L PT7M61xxNLXVE XV Lead Free and Green DFN1.6X1.6-4L PT7M61xxCLXVE XV Lead Free and Green DFN1.6X1.6-4L PT7M61xxCLEXVE XV Lead Free and Green DFN1.6X1.6-4L PT7M61xxCHXVE XV Lead Free and Green DFN1.6X1.6-4L PT7M61xxCHEXVE XV Lead Free and Green DFN1.6X1.6-4L Notes: 1: “xx” refer to voltage range, see below table 1. 2: Adding E suffix=1% Hysteresis. For example: PT7M61xxCLETA3E. 3: None E suffix=5% Hysteresis. For example:PT7M61xxCLTA3E. 4: E = Pb-free and Green 5: Adding X Suffix= Tape/Reel 6: Contact Pericom for availability Table 1 Function comparison Table 2 Suffix “xx” definition of PT7M61xx Item Part No. Reset Output Threshold Open-Drain Push-Pull Active high Active low Active high Active low 1 PT7M61xxCL - - - 1.8V to 5.0V in 100mV increments 2 PT7M61xxCH - - -
3 PT7M61xxNL - - -
2015-12-0005 PT0181-15 01/18/16 PT7M6118-6150 CL/CH /NL Low Power Voltage Detector Suffix xx VTH- (V) Suffix xx VTH- (V) Suffix xx VTH- (V) Suffix xx VTH- (V) Suffix xx VTH- (V) 23 2.3 30 3.0 37 3.7 44 4.4 24 2.4 31 3.1 38 3.8 45 4.5 Pericom Semiconductor Corporation 1-800-435-2336 www.pericom.com Pericom reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance and to supply the best possible product. Pericom does not assume any responsibility for use of any circuitry described other than the circuitry embodied in Pericom product. The company makes no representations that circuitry described herein is free from patent infringement or other rights, of Pericom.