PT644857G-TLMWD-EMR04 P-TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 33
Technical content
DESCRIPTION
5.7” TFT LCD, Medium Bright, RTP APPROVED BY DATE
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 2 1. Table of Contents No. Contents Page
1 Table of Contents 2
2 Record of Revisions 3
3 Module Numbering System 4
4 Application 5
5 Features 5
6 General Specifications 5
7 Absolute Maximum Ratings 6
8 Electrical Characteristics 7
9 Block Diagram 10
10 Input / Output Terminals Pin Assignment 11
11 Interface Timing 16
12 Optical Characteristics 19
13 Reliability Test 22
14 Packaging 23
15 Precautions 24
16 Outline Drawing 26
17 Definition of Labels 27
18 Incoming Inspection Standards 29
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 3 2. Record of Revisions Rev. Comments Page Date
1 Preliminary Specification was first issued All 3/30’12
2 Modify 1. Table of Contents 2 7/25’12 2 Modify 8.3 Transparent Touch panel 8 7/25’12 2 Add 10.5 Power ON/OFF Sequence 15 7/25’12 2 Modify 12. Optical Characteristics 19 7/25’12
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 4 3. Module Numbering System
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 5 4. Application This specification is applied to the 5.7 inch VGA supported TFT-LCD module, and can display true 262,144 colors(6 bit/ color). The module is designed for OA, Car TV application and other electronic products which require flat panel display of digital signal interface. This module is composed of a 5.7”TFT-LCD panel, a driver circuit and backlight unit and used as the input devices for general electric appliances via both finger and pen-entry. 5. Features - VGA (640×480 pixels) resolution. - Digital 18 bit parallel RGB. - Dot inversion mode with stripe type. - LED drive circuit is built in this module to provide PWM Dimmer function - Transparent Touch panel 4-Wire Analog Resistive 6. General Specifications Item Specifications Unit Screen Size 5.7 (Diagonal) inch Display Format 640RGB(H)×480(V) dot Active Area 115.2(H)×86.4(V) mm Dot Size 0.060(H)×0.180(V) mm Pixel Configuration RGB Vertical Stripe - Display Mode TN Type Transmissive Mode Normally White Surface Treatment Anti-Glare and Hard Coating(3H) - Viewing Direction 6 O’clock (The Gray Inversion will appear at this direction) Outline Dimension 144.0(W)×104.6(H)×14.5(D) mm Weight 188.5 g RoHS Compliance P-tec certifies this product to be in compliance with European Union Directive 2011/65/EU on the restriction of certain hazardous substances in electrical and electronic equipment
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 6 7. Absolute Maximum Ratings
7.1 Absolute Ratings of Environment
Item Symbol Value Unit Note Min. Max. Storage Temperature TST -30 +80 °C (1)(2) Operating Ambient Temperature TOP -20 +70 °C (1)(2) Note1: Background color changes slightly depending on ambient temperature. This phenomenon is reversible. Note2: Please refer to item of RELIABILITY .
7.2 Electrical Absolute Ratings
7.2.1 TFT-LCD Module
(Ta=25±2°C, GND=VSS=0V) Item Symbol Value Unit Note Min. Max. Digital Power Supply Voltage VCC -0.3 4.3 V -
7.2.2 LED Driver Absolute Maximum Ratings
(Ta=25±2°C) Item Symbol Value Unit Note Min. Max. LED Driver Supply Voltage VLED -0.3 17 V (1) LED Driver PWM PWM -0.3 6 V (1) Note (1) Permanent damage to the device may occur if maximum values are exceeded or reverse voltage is loaded.
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 7 8. Electrical Characteristics
8.1 TFT-LCD Module
(Ta=25±2°C) Item Symbol Value Unit Note Min. Typ. Max. Power Supply Voltage VCC 3.0 3.3 3.6 V - Input High Threshold Voltage VIH 0.7VCC - VCC V - Input Low Threshold Voltage VIL 0 - 0.3VCC V - Current dissipation ICC - 140 196 mA - Power Consumption PL - 0.462 0.504 W (1) Frame Frequency FV - 60 - Hz - Dot Clock DCLK - 25.175 - MHz - Note (1) The specified power consumption is under the conditions at VCC=3.3V, FV=60Hz, whereas a power dissipation check pattern below is displayed.
8.2 LED Driver Unit
(Ta=25±2°C) Item Symbol Value Unit Note Min. Typ. Max. Voltage of LED Driver Unit VLED(DU) 11.2 12.0 12.6 V - Current of LED Driver Unit ILED(DU) - 180 252 mA B/L=200mA Current of LED Driver Unit ILED(DU) - 130 182 mA B/L=150mA Current of LED Driver Unit ILED(DU) - 80 112 mA B/L=100mA Dimmer signal Low voltage VPWML - - 0.2 V - Dimmer signal High voltage VPWMH 4 5.0 5.5 V - Dimmer frequency fPWM - 120 - Hz - PWM Pulse width TPWMH 10 us - LED Life Time(25℃) - 40000 50000 - hr - Active Area Black Pattern / 0 Gray
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 8
8.3 Transparent Touch panel
Electrical characteristics
Min. Typ. Max. Operating Voltage - 5 7 V - Terminal Resistance X-direction 200 - 900 Ω At connector Y-direction 200 - 900 Ω At connector Insulation Resistance ≧ 20MΩ At DC25V Linearity ≦1.5% (1) Chatting ≦ 10 ms At connector Note(1): How to measure the linearity Definition of linearity : In Fig. 1, when the DC 5V is applied to the "X" directional electrode and "Y" directional electrode of panel alternately, the voltage between the depressed point and the reference surface shall be the output voltage in X and Y surface (Eox and Eoy). As shown in Fig. 2, measure the point on 10mm grid enclosed by the positions "A" and "B", which are located at the inside of visible area the specified distance away from the edge, has been depressed. When the output voltage corresponding to every measurement position is plotted as shown in Fig. 3, the difference between the voltage enclosed by the positions "A" and "B" and the output voltage at the same position shall be "ΔEx" (or "ΔEy") and the electric potential difference EAB in X surface, "EABx" (or EAB in Y surface, "EABy") between "A" and "B" shall be defined as the linearity.
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 9 Measurement of linearity A measured value shall be a maximum value in absolute value tolerance when every nodal point on a grid shown in Fig. 5 has been pressed under wiring conditions described in Fig. 4. <Hitting conditions> Load : 70 ~ 100g with R0.8 mm polyacetal stylus pen Measuring area : 1.0mm inside the edge of touch panel active area <Measuring circuit>
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 10 9. Block Diagram
9.1 TFT-LCD Module with Backlight Unit
640(RGB)x 480 Pixel BACKLIGHT GND CLK IHS IVS GND R0~R5 GND G0~G5 GND B0~B5 TEST1 DEN VCC VCC R/L U/D TEST2 TEST3 VLED VLED GND GND PWM NC LED DRIVER Source Driver Gate Driver DC/DC Touch Panel TOP RIGHT BOTTOM LEFT
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 11 10. Input / Output Terminals Pin Assignment
10.1 TFT-LCD Module
Connector: CVILUX CF25331D0R0-05 Pin No. Symbol I/O Description
1 GND I Ground
2 CLK I Clock signal
3 IHS I Horizontal synchronous signal
4 IVS I Vertical synchronous signal
5 GND I Ground
6 R0 I RED data (LSB)
7 R1 I RED data
8 R2 I RED data
9 R3 I RED data
10 R4 I RED data
11 R5 I RED data(MSB)
12 GND I Ground
13 G0 I GREEN data(LSB)
14 G1 I GREEN data
15 G2 I GREEN data
16 G3 I GREEN data
17 G4 I GREEN data
18 G5 I GREEN data(MSB)
19 GND I Ground
20 B0 I Blue data(LSB)
21 B1 I Blue data
22 B2 I Blue data
23 B3 I Blue data
24 B4 I Blue data
25 B5 I Blue data(MSB)
26 TEST1 I TEST1(Please be sure to connect 26pin with ground)
27 DEN I Input data enable control
28 VCC I +3.3V power supply 29 VCC I +3.3V power supply
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 12 Pin No. Symbol I/O Description 30 R/L I Selection signal for horizontal scanning direction. Note (1) 31 U/D I Selection signal for vertical scanning direction. Note (1)
32 TEST2 I TEST2(to be open, or connected to either GND or Vcc)
33 TEST3 I TEST3(Please be sure to connect 33pin with ground)
Note (1) R/L=L, U/D=H R/L=H, U/D=H R/L=L, U/D=L R/L=H, U/D=L
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 13
10.2 Backlight Unit
Connector: CVILUX CI1106M1HR0-LF Pin No. Symbol Description
1 VLED LED drive circuit power supply (12V)
2 VLED LED drive circuit power supply (12V)
3 GND Ground
4 GND Ground
5 PWM PWM Dimmer
6 NC NO CONNECTION
JUMP: HCH HDS502-E
10.3 Transparent Touch Panel
Connector: CVILUX CF25041D0R0-10 Pin No. Symbol
1 TOP
2 RIGHT
3 BOTTOM
4 LEFT
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 14
10.4 Color Data Input Assignment
The brightness of each primary color(red, green and blue) is based on the 6 bit gray scale data input for the color. The higher the binary input, the brighter the color. The table provides the assignment of color versus data input. Color Data Signal Red Green Blue D05 D04 D03 D02 D01 D00 D15 D14 D13 D12 D11 D10 D25 D24 D23 D22 D21 D20 Basic Colors Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Gray Scale Of RED Red(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Gray Scale Of Green Green(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 Green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 Green(61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 Green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 Green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Gray Scale Of Blue Blue(0) / Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 Blue(61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 Blue(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 Blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 15
10.5 Power ON/OFF Sequence
Min. Typ Max. T1 1 - 2 ms T2 101 - - ms T3 34 - - ms T4 34 - - ms T5 34 - - ms T6 1000 - - ms
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 16 11. Interface Timing
11.1 Input Signal Characteristics
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 17
11.2 Waveform
11.2.1 Clock and Data input waveforms
11.2.2 Data input format for RGB Mode
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 18 11.2.3 The HS & VS timing of the ODD/EVEN field.
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 19 12. Optical Characteristics The optical characteristics should be measured in a dark environment (≦ 1 lux) or equivalent state with the methods shown in Note (4). Item Symbol Conditions Min. Typ. Max. Unit Note Contrast Ratio CR x=0, Y =0 Viewing Normal Angle 200 (350) - - (2) Response Time TR - 15 - ms (3) TF - 35 - ms Luminance(Center) Y B/L=200mA 620 （700） - cd/m2 B/L=100mA 310 （350） - cd/m2 Brightness uniformity BUNI x=0, Y =0 Viewing Normal Angle 80 (85) - ％ (5) Color Chromaticity Red Rx 0.570 0.620 0.670 - (1),(4) Ry 0.300 0.350 0.400 - Green Gx 0.320 0.370 0.420 - Gy 0.510 0.560 0.610 - Blue Bx 0.095 0.145 0.195 - By 0.045 0.095 0.145 - White Wx 0.270 0.320 0.370 - Wy 0.310 0.360 0.410 - Viewing Angle Horizontal x+ CR10 55 (65) - deg. x- 55 (65) - Vertical Y+ 45 (55) - Y- 55 (65) -
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 20 Note (1) Definition of Viewing Angle (x, y): Note (2) Definition of Contrast Ratio (CR): Note (3) Definition of Response Time (TR, TF): 12 o’clock direction y+ = 90º 6 o’clock y- = 90º x x y- x+ Normal x = y = 0º X+ = 90º X- = 90º 100% 90% 10% Gray Level 255 Gray Level 0 Gray Level 255 Time TF Optical Response TR
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 21 Note (4) Measurement Set-Up: The LCD module should be stabilized at a given temperature for 30 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a windless room. Note (5) Definition of brightness uniformity Brightness uniformity=(Min Luminance of 9 points)/(Max Luminance of 9 points)×100% Photometer (TOPCON BM-7 Fast) Field of View = 1º 500 mm LCD Module LCD Panel Center of the Screen Light Shield Room (Ambient Luminance < 1 lux)
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 22 13. Reliability Test No. Test Items Test Condition Remark
1 High Temperature Storage Test Ta= 80℃ 240 hours (1),(3),(4)
2 Low Temperature Storage Test Ta= -30℃ 240 hours (1),(3),(4)
3 High Temperature Operation
Test TS= 70℃ 240 hours (2),(3),(4)
4 Low Temperature Operation
Test Ta= -20℃ 240 hours (1),(3),(4)
5 High Temperature and High
Humidity Operation Test Ta=60℃ 90%RH 240 hours (3),(4)
6 Electro Static Discharge Test
(non-operating) -Panel Surface/Top Case : 150pF, 330Ω Air: ±15kV, Contact: ±8kV (3)
7 Mechanical Shock Test
(non-operating) Half sine wave, 100G, 6ms 3 times shock of each six surfaces (3)
8 Vibration Test
(non-operating) Sine wave, 10 ~ 55 ~ 10Hz, 3 axis, 2 hours/axis (3)
9 Thermal Shock Test
(non-operating) -20℃(30min) ~ 70℃(30min),100 cycles (3),(4)
10 Drop Test(with Carton) Height: 80cm
1 corner, 3 edges, 6 surfaces (3) Note 1: Ta is the ambient temperature of samples. Note 2: Ts is the temperature of panel’s surface. Note 3: In the standard condition, there shall be no practical problem that may affect the display function. After the reliability test, the product only guarantees operation, but don’t guarantee all of the cosmetic specification. Note 4: Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature.
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 23 14. Packaging EPE PAD 345.0x30.0x20.0 8 PRODUCT 144.0x104.6x14.5 60 1CART ON475.0x370.0x375.0EXT ERNAL BOX CART ONCARD BOARD 345.0x150.0x3.5 300.0x145.0x0.09ST AT IC SHIEDING BAGS Q.T .Y CART ON MAT ERIAL PART S LIST SIZE(LxWxH) unit:mm 450.0x23.0x150.0 NOT EIT EM CARD BOARD EPE 455.0x350.0x164.0 CART ON 2INT ERNAL BOX
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 24 15. Precautions
15.1 Assembly and Handling Precautions
(1) Do not apply rough force such as bending or twisting to the module during assembly. (2) It’s recommended to assemble or to install a module into the user’s system in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) Don’t apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight. (4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the damage and latch-up of the CMOS LSI chips. (5) Do not plug in or pull out the I/F connector while the module is in operation. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) Moisture can easily penetrate into LCD module and may cause the damage during operation. (9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD module in the specified storage conditions. (10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the response time will become slow.
15.2 Safety Precautions
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (2) After the module’s end of life, it is not harmful in case of normal operation and storage.
15.3 Terms of Warrant
(1) Acceptance inspection period The period is within one month after the arrival of contracted commodity at the buyer’s factory site. (2) Applicable warrant period The period is within twelve months since the date of shipping out under normal using and storage conditions.
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 25
15.4 Cautions for installing and assembling
Bezel edge must be positioned in the area between the Active area and View area. The bezel may press the touch screen and cause activation if the edge touches the active area. A gap of approximately 0.5mm is needed between the bezel and the top electrode. It may cause unexpected activation if the gap is too narrow. There is a tolerance of 0.2 to 0.3mm for the outside dimensions of the touch panel and tail. A gap must be made to absorb the tolerance in the case and connector.
15.5 Operation Prohibit
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 26 16.Outline Drawing
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 27 17.Definition of Labels The bar code nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a) Module Name: PT644857G-TLMWD-EMR04 (b) Serial ID: A B C D E F G H I J K L M Serial No. Revision Code Factory Code Manufactured Date Screen Size Serial ID includes the information as below: (a) Screen size (Diagonal): Inch Code (ABCD) 3.5” → 0350 10.4” → 1040 (b) Manufactured Date: Year, Month, Day (EFG) Year (E) Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Mark 0 1 2 3 4 5 6 7 8 9 Year 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Mark A B C D E F G H I J PT644857G-TLMWD-EMR04
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 28 Month (F) Mark 1 2 3 4 5 6 7 8 9 A B C Day (G) Day 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Mark 1 2 3 4 5 6 7 8 9 A B C D E F G Day 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Mark H I J K L M N O P Q R S T U V (c) Factory Code (H): For P-TEC internal use. (d) Revision Code (I): Cover all the change, for example: 1: Rev.1, 2: Rev.2, 3: Rev.3…etc. (e) Serial No. (JKLM): Manufacturing sequence of product, for example: 0001~9999.
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 29 18. Incoming Inspection Standards
18.1 The environmental condition of inspection
The environmental condition and visual inspection shall be conducted as below. (1) Ambient temperature 25 ± 5℃ (2) Humidity: 60 ± 5% RH (3) Viewing distance is approximately 35 ~ 40 cm (4)Viewing angle is normal to the LCD panel as Fig _1(10°) (5) Ambient Illumination: 300 ~ 500 Lux for external appearance inspection
18.2 The defects classify of AQL as following:
Major 0.65% It is defect that is likely to result in failure or to reduce materially the usability of the intended function. Minor 1.5% It is a defect that will not result in functioning problem with deviation classified.
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 30
18.3 Inspection Parameters
Item Specification/Description Note Display Function No Display - Malfunction - Operating Contrast ratio Out of Spec - Line defect No obvious Vertical and Horizontal line defect in bright , dark and colored. Point Defect (red,green,blue,dark, white) Item Acceptable number Note: 1、4、 5、6 A B Total BRIGHT DOT N≦2 N≦2 N≦7 DARK DOT N≦3 N≦4 TOTAL DOT N≦4 N≦5 TWO ADJACENT DOT NOT ALLOWED THREE OR MORE ADJACENT DOT NOT ALLOWED External Inspection (non-operating) Scratch on the polarizer L(mm) W(mm) Acceptable number L≦2.5 W≦0.1 4 L＞2.5 W＞0.1 0 Note:2 Dent or bubble on the polarizer Dimension(mm) Acceptable number D≦0.5 4 D≦0.15 Disregard Note:3 Foreign material on the polarizer Dimension(mm) Acceptable number D≦0.5 4 D≦0.15 Disregard Note:3
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 31
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 32 Note1. The definition of dot defect : The dot defect was judged after repair and the size of a defective dot over 1/2 of whole dot is regarded as one defective dot. Note2. W L Note3. D：Diameter D=(a+b)/2 Note4. Bright dot is defined through 6% transmission ND Filter as following. Note5. ADJACENT DOT
MODEL NO. PAGE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 33 Note6. Note7. A area : Without any defect point effect on normal operation. B area : None-specify
18.4 Handling of LCM
(1)Don't give external shock. (2)Don't apply excessive force on the surface. (3)Liquid in LCD is hazardous substance. Must not lick and swallow. when the liquid is attach to your hand, skin, cloth etc. Wash it out thoroughly and immediately. (4)Don't operate it above the absolute maximum rating. (5)Don't disassemble the LCM. B:BM A:AA