PSZLF100 WALL | Alldatasheet

Document overview

  • Manufacturer or author: dhoutz
  • PDF pages: 4

Technical content

Wall Industries, Inc. Rev B PSZLF100 SERIES

96 Watt AC/DC Open Frame LED Power Supplies

08/08/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 1 of 4

FEATURES

  • RoHS Compliant
  • 96 Watts Output Power
  • Double Layered PCB
  • Single Outputs
  • PFC Function, PF > 0.9
  • Up to 90% High Efficiency
  • Free Air Convection Cooling
  • -30°C~+70°C Operating Temperature Range
  • Open Frame LED Power Supply
  • 90-295VAC Input Voltage Range
  • Constant Current and Constant Voltage (CC & CV) Modes
  • Short Circuit, Over Load, and Over Voltage Protection
  • UL8750, IEC/EN 61347-2-13, and IEC/EN 61347-1 Safety Approvals (Pending) Size: 4.12 x 2.07 x 1.06 inches 104.7 x 52.6 x 27.0 mm

DESCRIPTION

The PSZLF100 series of AC/DC switching power supplies provides 96 Watts of output power in an ultra compact 4.12” x 2.07” x 1.06” open frame package. This series consists of single output models with an input voltage range of 90-295VAC. Some features include up to 90% high efficiency, power factor > 0.9, and short circuit, over load, and over voltage protection. The PSZLF100 series has both constant current (CC) and constant voltage (CV) modes available and is suitable for LED lighting applications. This series is also RoHS compliant and has UL8750, IEC/EN 61347-2-13, and IEC/EN 61347-1 safety approvals (pending) MODEL SELECTION TABLE Output Current Model Number Input Voltage Range Output Voltage (2) Min Max Output Power Ripple & Noise (1) Efficiency PSZLF100-48S 48 VDC (36~48 VDC) 1.3 A 1.75 A (1.3~2.0 A) 96 W 5V p-p 89% PSZLF100-54S 90 ~ 295 VAC NOTES 1. Measured at 20MHz BW and with 0.1µF and 47µF capacitors in parallel. 2. Input Voltage = 115VAC or 230VAC. This is suitable operation region for LED related applications but please reconfirm special electrical requirements for some specific system designs. DERATING Load vs Ambient Temperature Load vs Input Voltage 100 120 -30 -20 0 20 30 40 50 60 80 Load (%) Ambient Temperature (°C) 60% 75% 80% 180~295 VAC Others 100 120 90 120 135 155 230 264 295 Load (%) Input Voltage (VAC) Ta=25°C Note: If the output is not connected to LEDs, the input voltage must be greater than 180VAC

Wall Industries, Inc. Rev B PSZLF100 SERIES 08/08/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 2 of 4 SPECIFICATIONS: PSZLF100 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Input Voltage AC input voltage range 90 295 VAC Input Frequency 50/60 Hz At 115 VAC and full load 1.4 Input Current At 230 VAC and full load 0.7 A Inrush Current At 230VAC 60 A Power Factor At 115/230 VAC and full load 0.9 OUTPUT SPECIFICATIONS Output Voltage See Table PSZLF100-24S 22 26.5 PSZLF100-36S 33 39.5 PSZLF100-48S 44 51.5 Voltage Adjustment Setup (CV Mode) PSZLF100-54S 49 55 VDC PSZLF100-24S 15.6 24 PSZLF100-36S 23.4 36 PSZLF100-48S 31.2 48 Constant Current Operation Voltage (CC Mode) PSZLF100-54S See Note 1 35.1 54 VDC Voltage Tolerance -10 +10 % PSZLF100-24S 3.5 PSZLF100-36S 2.1 PSZLF100-48S 1.75 Preset Current (CC Mode) PSZLF100-54S At 230 VAC 1.4 A PSZLF100-24S 2.6 4.0 PSZLF100-36S 1.72 2.65 PSZLF100-48S 1.3 2.0 Current Adjustment Range (CC Mode) PSZLF100-54S 1.15 1.77 A Minimum Load See Table Line Regulation 110~240VAC ±4 % Load Regulation Min load to max load ±5 % Output Power See Table Ripple & Noise See Table Temperature Coefficient 0~50°C -0.02 +0.02 %/°C PROTECTION Short Circuit Protection auto-recovery Over Voltage Protection Zener diode clamp Over Current Protection auto-recovery GENERAL SPECIFICATIONS Efficiency At 230 VAC and full load See Table Input to Output 3750 Input to FG 1880 Isolation Voltage Output to FG 500 VAC Leakage Current At 240 VAC 0.7 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature With derating (see derating curve) -30 +70 °C Storage Temperature -40 +85 °C Humidity 95 % RH Cooling Free air convection MTBF 25°C (MIL-HDBK-217F) 450,000 hours PHYSICAL SPECIFICATIONS Weight 6.88oz (195g) SAFETY & EMC Safety Approvals UL8750, IEC / EN 61347-2-13, IEC / EN 61347-1 (pending) EMI (Conducted and Radiated Emissions) EN 55015 (pending) EMS (Noise Immunity) EN61547 (pending) Harmonic Current EN61000-3-2 (at full load), EN 61000-3-3 (pending) Surge 2KV (L-N), 4KV (L N – FG)

Wall Industries, Inc. Rev B PSZLF100 SERIES 08/08/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 3 of 4 BLOCK DIAGRAM EMI FILTER RECTIFIERS POWER SWITCHING O.L.P . PWM CONTROL FILTER RECTIFIERS DETECTION CIRCUIT O.C.P . I/P FG MECHANICAL DRAWING Unit: inches (mm) PIN CONNECTIONS Pin Assignment

1 AC IN (N)

2 AC IN (L)

1.06 (27.0) 0.12 (3.0) 4.12 (104.7) 3.82 (97.0) 2.07 (52.6) 1.77 (45.05) 1.06 (27.0) 2 3 Vo ADJ. Io ADJ. NOTES: 1. Tolerance: ±0.04” (±1mm) 2. Weight: 6.88oz (195g) 3. All dimensions are for reference only

Wall Industries, Inc. Rev B PSZLF100 SERIES 08/08/2013 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 4 of 4 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001- 2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: /telephonesolid(603)778-2300 Toll Free: /telephonesolid(888)597-9255 Fax: /telephonesolid(603)778-9797 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 37 Industrial Drive Exeter, NH 03833