PSUT130 POWERSEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency
  • Isolation voltage 3000 V ∼
  • Planar glass passivated chips
  • Low forward voltage drop
  • Leads suitable for PC board soldering
  • UL Release applied

Applications

  • Switching and control of three phase AC circuits
  • Light and temperature control
  • Softstart AC motor controller
  • Solid state switches Advantages
  • Easy to mount with four screws
  • Space and weight savings
  • Improved temperature and power cycling capability
  • High power density
  • Small and light weight POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-TOPTM 1  2005 POWERSEM reserves the right to change limits, test conditions and dimensions Data according to IEC 60747 refer to a single thyristor unless otherwise stated Symbol Test Conditions Maximum Ratings IRMS TC = 85 °C; 50-400 Hz (per phase) 120 A ITRMS 88 A ITAVM TC = 85 °C; 180° sine 55 A ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 1300 A VR = 0 t = 8.3 ms (60 Hz), sine 1400 A TVJ = 125 °C t = 10 ms (50 Hz), sine 1150 A VR = 0 t = 8.3 ms (60 Hz), sine 1300 A ∫∫∫∫∫ i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 8450 A²s VR = 0 t = 8.3 ms (60 Hz), sine 8100 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 6600 A²s VR = 0 t = 8.3 ms (60 Hz), sine 7000 A²s (di/dt)cr TVJ = 125 °C repetitive, I T = 80 A 150 A/µs f=50Hz, tP=200µs VD=2/3VDRM IG=0.45 A non repetitive,I T = ITAVM 500 A/µs diG/dt=0.45A/µs (dv/dt)cr TVJ = 125 °C V D=2/3VDRM 1000 V/µs RGK= ∞ , method 1 (linear voltage rise) PGM TVJ = 125 °C t P=30µs ≤ 10 W IT =ITAVM tP=300µs ≤ 5W PGAVM 0.5 W VRGM 10 V TVJM 125 °C Tstg -40... + 125 °C VISOL 50/60 Hz, RMS t = 1 min 2500 V ∼ IISOL ≤ 1 mA t = 1 s 3000 V ∼ Md Mounting torque (M5) 3 Nm 26 lb.in. Weight typ. 86 g VRSM VRRM Type VDSM VDRM (V) (V) 900 800 PSUT 130/08 PSUH 130/08 1300 1200 PSUT 130/12 PSUH 130/12 1500 1400 PSUT 130/14 PSUH 130/14 1700 1600 PSUT 130/16 PSUH 130/16 1900 1800 PSUT 130/18 PSUH 130/18 V15 N15 G15 S1 T1 U1L1 M1 N1 Q15R15 S15 D1 E1 F1 I15 J15 K15B15 C15 D15 W3HW3C V15N15G15 S1 T1 U1L1 M1 N1 Q15 R15S15 D1 E1 F1 I15 J15 K15B15 C15 D15 typical picture, for pin configuration see outline drawing

product still underdevelopment ECO-TOPTM 1 POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20  2005 POWERSEM reserves the right to change limits, test conditions and dimensions Package style and outline Dimensions in mm (1mm = 0.0394“) Symbol Test Conditions Characteristic Value ID,IR TVJ = 125°C, V R = VRRM, VD=VDRM ≤ 5m A VT IT = 200 A, T VJ = 25 °C ≤ 1.57 V VTO For power-loss calculations only 0.8 V rT 3.9 m Ω VGT VD=6V T VJ= 25°C ≤ 1.5 V TVJ=-40°C ≤ 1.6 V IGT VD=6V T VJ= 25°C ≤ 100 mA TVJ=-40°C ≤ 200 mA VGD TVJ= 125°C V D=2/3VDRM ≤ 0.2 V IGD TVJ= 125°C V D=2/3VDRM ≤ 10 mA IL TVJ= 25°C, tP=10µs ≤ 450 mA IG=0.45A, diG/dt=0.45A/µs IH TVJ= 25°C, VD=6V, RGK= ∞≤ 200 mA tgd TVJ= 25°C, VD=1/2VDRM ≤ 2µ s IG=0.45A, diG/dt=0.45A/µs RthJC per thyristor; DC 0.55 K/W per module 0.092 K/W RthJH per thyristor; sine 180° el 0.7 K/W per module 0.117 K/W ds Creeping distance on surface (Pin to heatsink) min. 11.2 mm dA Strike distance in air (Pin to heatsink) min. 11.2 mm a Max. allowable acceleration 50 m/s² W3C W3H