DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSUU100 Series U-Bracket

100 Watt, Single Output

AC/DC Power Supply for I.T.E. Rev A

FEATURES

  • Single Output
  • Class I Insulation
  • Internal EMI Filter
  • 3-pin Input Connector
  • Power Factor Correction
  • Over Voltage Protection (Crowbar Design)
  • Output Voltage Available from 3VDC thru 50VDC
  • Wide Input Voltage Range: 90~264VAC, 47~63Hz
  • Input Surge Current, Over Voltage, and Over Load Protection

DESCRIPTION

The PSSUU100 series of AC/DC switching mode power supplies provides 100 Watts of continuous output power in a compact, U- frame constructed design. This series has single output supplies with a universal input range of 90~264VAC. These units are ide ally suited for use in disc drive systems, microprocessor based systems, portable equipment, and many other applications. All models meet FCC Part-15 class B and CISPR-22 class B emission limits. These supplies also comply with UL/cUL (UL 60950-1), TUV/Bauart (EN 60950-1), and new CE requirements. All units are 100% burn-in tested. SPECIFICATIONS: PSSUU100 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT (Vin) Operating Voltage Range 90 264 VAC Input Frequency 47 63 Hz Input Current (Low Line) Io = Full Load, Vin = 115VAC 2.0 A Input Current (High Line) Io = Full Load, Vin = 230VAC 1.0 A Inrush Current (Low Line) Io = Full Load, 25°C, Cool Start, Vin = 115VAC 12 15 A Inrush Current (High Line) Io = Full Load, 25°C, Cool Start, Vin = 230VAC 26 30 A Safety Ground Leakage Current Io = Full Load, Vin = 240VAC 0.4 0.75 mA Start-Up Time Io = Full Load, Vin = 100VAC 0.3 1 2 s OUTPUT (Vo) Output Voltage Range See Rating Chart Load Regulation Vin = 230VAC 3 5 % Line Regulation Io = Full Load 0.5 1 % Output Power Vin = 90 to 264VAC 100 W Output Current Range See Rating Chart *Ripple & Noise (peak to peak) Full Load, Vin = 90VAC 0.5 1 % Transient Response Time Io = Full Load to Half Load, Vin = 100VAC 4 ms Hold-Up Time Io = Full Load, Vin = 110VAC 16 ms PROTECTION Over Voltage Protection 112 132 % Over Current Protection 110 150 % GENERAL Efficiency Io = Full Load, Vin = 230VAC 70 80 85 % Dielectric Withstanding Voltage For Primary to Secondary Primary to Secondary 4242 VDC Dielectric Withstanding Voltage For Primary to Ground Primary to Ground 2121 VDC Isolation Resistance Test Voltage = 500VDC 50 MΩ Power Factor Correction Io = Full Load, Vin = 90~260VAC 0.95 0.97 1.0 ENVIRONMENTAL Operating Temperature Derate linearly from 100% Load at 50°C to 50% load at 70°C 0 +70 °C Storage Temperature -40 +85 °C Relative Humidity 5 95 % Temperature Coefficient All Outputs -0.04 +0.04 %/°C MTBF 100,000 hours PHYSICAL Weight Approximately 475 grams Dimensions 5(L) x 3.2(W) x 1.19(H) inches SAFETY EMI Requirements for CISPR-22 Vin = 220VAC B Class EMI Requirements for FCC PART-15 Vin = 110VAC B Class *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSUU100 Series U-Bracket AC/DC Power Supply for I.T.E. Rev A MODEL SELECTION TABLE Model Number Preset Voltage Output Voltage Range Output Current Range Total Regulation Output Power PSSUU100-101 3 VDC 3 ~ 5 VDC 18.00 ~ 10.80 5% 54W PSSUU100-102 5 VDC 5 ~ 6 VDC 14.00 ~ 11.66 5% 70W PSSUU100-103 6 VDC 6 ~ 9 VDC 13.33 ~ 8.88 5% 80W PSSUU100-104 9 VDC 9 ~ 11 VDC 11.11 ~ 9.09 5% 100W PSSUU100-105 11 VDC 11 ~ 13 VDC 9.09 ~ 7.69 3% 100W PSSUU100-106 13 VDC 13 ~ 16 VDC 7.69 ~ 6.25 3% 100W PSSUU100-107 16 VDC 16 ~ 21 VDC 6.25 ~ 4.76 3% 100W PSSUU100-108 21 VDC 21 ~ 27 VDC 4.76 ~ 3.70 2% 100W PSSUU100-109 27 VDC 27 ~ 33 VDC 3.70 ~ 3.03 2% 100W PSSUU100-110 33 VDC 33 ~ 40 VDC 3.03 ~ 2.50 2% 100W PSSUU100-111 40 VDC 40 ~ 50 VDC 2.50 ~ 2.00 2% 100W NOTES 1. Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal. 2. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal. MECHANICAL DRAWING Unit: inches (mm) PIN CONNECTIONS PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 OUT OUT OUT OUT OUT OUT RTN RTN RTN RTN RTN RTN N/C