PSSP100 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSP100 Series Single Output

100 Watt with PFC Function

AC/DC Switching Power Supply

FEATURES

  • 3 Year Warranty
  • Low Cost, High Reliability
  • Fixed Switching Frequency
  • LED Indicator for Power On
  • 100% Full Load Burn-In Tested
  • Universal AC Input / Full Range
  • Remote ON/OFF Control (Optional)
  • Built-In Active PFC Function, PF > 0.93
  • Built-In Constant Current Limiting Circuit
  • Soft Start Circuit, Limiting AC Surge Current
  • Short Circuit, Overload, and Over Voltage Protected SPECIFICATIONS: PSSP100 Series All specifications are based on 25 o C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 85 ~ 264VAC (120 ~ 370VDC) Input Frequency 47 to 63Hz AC Current (typical) 1.7A @ 115VAC 0.8A @ 230VAC Inrush Current (typical) Cold Start 30A @ 230VAC Leakage Current < 2mA @ 240VAC Power Factor (typical) PF > 0.93 @ 230VAC PF > 0.98 @ 115VAC and full load Remote ON/OFF Control (Option) CN1: 4~10VDC Power On, <0 ~ 0.8VDC Power Off OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) 3.3V - 15V outputs: 2.0%; 24V - 48V outputs: 1.0% Voltage Adjustment Range See Table Line Regulation 0.5% Load Regulation 3.3V - 7.5V outputs: 1.0%; 12V - 48V outputs: 0.5% Output Current See Table Ripple & Noise (max) (See Note 2) 3.3V - 15V outputs: 100mVp-p; 24V & 27V outputs: 150mVp-p; 48V output: 250mVp-p Setup, Rise Time 600ms, 30ms @ full load Hold Up Time (typical) 20ms @ full load Temperature Coefficient ±0.05%/°C (0 ~ 50°C) PROTECTION Overload Protection 105 ~ 150% rated output power Protection Type: Constant current limiting; recovers automatically after fault condition is removed Over Voltage See Table Protection Type: Shutdown output voltage, re-power on to recover. GENERAL SPECIFICATIONS Switching Frequency PFC: 67KHz PWM: 134KHz Efficiency (typical) See Table Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100MΩ/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10°C to +60°C (refer to output load derating curve) Storage Temperature -20°C to +85°C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 211,300 hours min. @ 25°C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 600 grams Dimensions 179(L) x 99(W) x 45(H) mm Warranty 3 years SAFETY & EMC Safety Standards UL60950-1, TUV EN60950-1 approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSP100 Series Single Output AC/DC Switching Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Number Input Voltage Output Voltage Voltage Adjust. Range Over Voltage Protection Output Current Output Power Efficiency PSSP100-5 5 VDC 4.75 ~ 5.5V 5.5 ~ 6.75V 20A 100W 76% PSSP100-48 85 ~ 264 VAC (120 ~ 370 VDC) NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF& 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. BLOCK DIAGRAM DERATING CURVE OUTPUT DERATING VS INPUT VOLTAGE

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSP100 Series Single Output AC/DC Switching Power Supply MECHANICAL DRAWING Unit: mm Terminal Pin No. Assignment Remote ON/OFF (CN1): JST S2B-XH or equivalent (optional) Pin No. Assignment Pin No. Assignment Mating Housing Terminal

1 AC/L 1 RC+

2 AC/N 2 RC-

JST SXH-001T-P0.6 or equivalent 3 FG 4,5 DC OUTPUT (-V) 6,7 DC OUTPUT (+V)