PSSP150 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSP150 Series Single Output

150 Watt with PFC Function

AC/DC Switching Power Supply

FEATURES

  • 3 Year Warranty
  • Fixed Switching Frequency
  • LED Indicator for Power On
  • 100% Full Load Burn-In Tested
  • Universal AC Input / Full Range
  • Remote ON/OFF Control (Optional)
  • Built-In Active PFC Function, PF > 0.93
  • Built-In Constant Current Limiting Circuit
  • Short Circuit, Overload, Over Voltage, and Over Temperature Protected SPECIFICATIONS: PSSP150 Series All specifications are based on 25 o C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range (See Note 5) 85 ~ 264VAC (120 ~ 370VDC) Input Frequency 47 to 63Hz AC Current (typical) 2.5A @ 115VAC 1.2A @ 230VAC Inrush Current (typical) Cold Start 40A @ 230VAC Leakage Current < 2mA @ 240VAC Power Factor (typical) PF > 0.93 @ 230VAC PF > 0.98 @ 115VAC and full load Remote ON/OFF Control (Option) CN1: 4~10VDC Power On, < 0 ~ 0.8VDC Power Off OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) 3.3V - 15V outputs: 2.0%; 24V - 48V outputs: 1.0% Voltage Adjustment Range See Table Line Regulation 0.5% Load Regulation 3.3V - 7.5V outputs: 1.0%; 12V - 48V outputs: 0.5% Output Current See Table Ripple & Noise (max) (See Note 2) 3.3V - 15V outputs: 100mVp-p; 24V & 27V outputs: 150mVp-p; 48V output: 250mVp-p Setup, Rise Time 600ms, 30ms @ full load Hold Up Time (typical) 20ms @ full load Temperature Coefficient ±0.05%/°C (0 ~ 50°C) PROTECTION Overload Protection 105 ~ 150% rated output power Protection Type: Constant current limiting; recovers automatically after fault condition is removed Over Voltage See Table Protection Type: Shutdown output voltage, re-power on to recover. Over Temperature 95°C ±5°C (TSW1: detect on heatsink of power transistor) Protection Type: Shutdown output voltage; recovers automatically after temperature goes down. GENERAL SPECIFICATIONS Switching Frequency PFC: 67KHz PWM: 134KHz Efficiency (typical) See Table Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100MΩ/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10°C to +60°C (refer to output load derating curve) Storage Temperature -20°C to +85°C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 191,200 hours min. @ 25°C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 760 grams Dimensions 199(L) x 99(W) x 50(H) mm Warranty 3 years SAFETY & EMC Safety Standards UL60950-1, TUV EN60950-1 approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSP150 Series Single Output AC/DC Switching Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Number Input Voltage Output Voltage Voltage Adjust. Range Over Voltage Protection Output Current Output Power Efficiency PSSP-150-5 5 VDC 4.75 ~ 5.5V 5.5 ~ 6.75V 30A 150W 75% PSSP-150-15 15 VDC 14.3 ~ 16.5V 16.5 ~ 20.25V 10A 150W 81% PSSP-150-48 85 ~ 264 VAC (120 ~ 370 VDC) NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. BLOCK DIAGRAM DERATING CURVE OUTPUT DERATING VS INPUT VOLTAGE PFC fosc: 67KHz PWM fosc: 134KHz

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSP150 Series Single Output AC/DC Switching Power Supply MECHANICAL DRAWING Unit: mm Terminal Pin No. Assignment Remote ON/OFF (CN1): JST S2B-XH or equivalent (optional) Pin No. Assignment Pin No. Assignment Mating Housing Terminal

1 AC/L 1 RC+

2 AC/N 2 RC-

JST SXH-001T-P0.6 or equivalent 3 FG 4,5 DC OUTPUT (-V) 6,7 DC OUTPUT (+V)