PSSBU120-103

Microsoft Word - PSSBU120.doc

Document overview

• Manufacturer or author: dhoutz
• PDF pages: 3

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSBU120 Series

120 Watt, Open Frame

Single, Dual, and Triple Outputs AC/DC Switching Power Supply for I.T.E. Rev A

FEATURES

• 100% Burn In
• Class I Insulation
• Internal EMI Filter
• Power Factor Correction
• Power Fail Detect (Optional)
• Wide Input Voltage Range: 90~264VAC
• Over Voltage Protection (Crowbar Design)
• Output Voltages Available from 3VDC thru 50VDC
• Input Surge Current, Over Voltage, and Over Load Protection

DESCRIPTION

The PSSBU120 series of AC/DC switching mode power supplies provides 120 Watts of continuous output power in a compact, open frame constructed design. This series has a universal input range with single, dual, or triple outputs. These units are id eally suited for use in CRT terminals, disc drive systems, microprocessor based systems, portable equipment, and many other applications. All models meet FCC Part-15 class B and CISPR-22 class B emission limits. These supplies also comply with UL/cUL (UL 60950), TUV/GS (EN 60950), and new CE requirements. All units are 100% burn-in tested. SPECIFICATIONS: PSSBU120 Series All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT (Vin) Operating Voltage Range 90 264 VAC Input Frequency 47 63 Hz Input Current (Low Line) Io = Full Load, Vin = 115VAC 1.7 A Input Current (High Line) Io = Full Load, Vin = 230VAC 1.0 A Inrush Current (Low Line) Io = Full Load, 25°C, Cool Start, Vin = 115VAC 16 20 A Inrush Current (High Line) Io = Full Load, 25°C, Cool Start, Vin = 230VAC 46 51 A Safety Ground Leakage Current Io = Full Load, Vin = 240VAC 0.4 0.75 mA Start-Up Time Io = Full Load, Vin = 100VAC 0.3 1 2 s OUTPUT (Vo) Output Voltage Range See Rating Chart Load Regulation Vin = 230VAC 3 5 % Line Regulation Io = Full Load 0.5 1 % Output Power Vin = 90 to 264VAC 120 W Output Current Range See Rating Chart *Ripple & Noise (peak to peak) Full Load, Vin = 90VAC 0.5 1 % Transient Response Io = Full Load to Half Load, Vin = 100VAC 4 ms Hold-Up Time Io = Full Load, Vin = 110VAC 16 ms PROTECTION Over Voltage Protection 112 132 % Over Current Protection 110 150 % GENERAL Efficiency Io = Full Load, Vin = 230VAC 70 80 88 % Dielectric Withstanding Voltage For Primary to Secondary Primary to Secondary 4242 VDC Dielectric Withstanding Voltage For Primary to Ground Primary to Ground 2121 VDC Isolation Resistance Test Voltage = 500VDC 50 MΩ Power Factor Correction Io = Full Load, Vin = 90~260VAC 0.95 0.97 1.0 ENVIRONMENTAL Operating Temperature Derate linearly from 100% Load at 50°C to 50% load at 70°C 0 +70 °C Storage Temperature -40 +85 °C Relative Humidity 5 95 % Temperature Coefficient All Outputs -0.04 +0.04 %/°C MTBF Operating temperature at 25°C, calculated per MIL-HDBK-217F 100,000 hours PHYSICAL Weight Approximately 350 ~ 428 grams Dimensions (L x W x H) 5.0 x 3.0 x 1.32 inches 127 x 76.2 x 33.6 mm SAFETY EMI Requirements for CISPR-22 Vin = 220VAC B Class EMI Requirements for FCC PART-15 Vin = 110VAC B Class *Note: The Ripple & Noise for output voltages under 3.3VDC is 2% max.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSBU120 Series Single, Dual, and Triple Outputs AC/DC Switching Power Supply for I.T.E. Rev A MODEL SELECTION TABLES SINGLE OUTPUT MODELS Model Number Preset Voltage Output Voltage Range Output Current Range Total Regulation Max Output Power PSSBU120-101 3 VDC 3 ~ 5 VDC 22.00 ~ 20.00A 5% 100W PSSBU120-102 5 VDC 5 ~ 6 VDC 22.00 ~ 18.33A 5% 110W PSSBU120-103 6 VDC 6 ~ 9 VDC 19.16 ~ 12.77A 5% 115W PSSBU120-104 9 VDC 9 ~ 11 VDC 13.33 ~ 10.90A 4% 120W PSSBU120-105 11 VDC 11 ~ 13 VDC 10.90 ~ 9.23A 3% 120W PSSBU120-106 13 VDC 13 ~ 16 VDC 9.23 ~ 7.50A 3% 120W PSSBU120-107 16 VDC 16 ~ 21 VDC 7.50 ~ 5.71A 3% 120W PSSBU120-108 21 VDC 21 ~ 27 VDC 5.71 ~ 4.44A 2% 120W PSSBU120-109 27 VDC 27 ~ 33 VDC 4.44 ~ 3.63A 2% 120W PSSBU120-110 33 VDC 33 ~ 40 VDC 3.63 ~ 3.00A 2% 120W PSSBU120-111 40 VDC 40 ~ 50 VDC 3.00 ~ 2.40A 2% 120W DUAL OUTPUT MODELS Output #1 Output #2 (*Output #3 for PSSBU120-215 & 219) Model Number Vo (nom) Io (min) Io (max) Reg (max) Vo (nom) Io (min) Io (max) Reg (max) Maximum Output Power PSSBU120-200 +3.3 VDC 1.5A 15A 5% +12 VDC 0.6A 6A 5% 120W PSSBU120-201 +5 VDC 1.5A 15A 5% +12 VDC 0.8A 6A 5% 120W PSSBU120-202 +5 VDC 1.5A 15A 5% +15 VDC 0.6A 6A 5% 120W PSSBU120-203 +5 VDC 1.5A 15A 5% +24 VDC 0.4A 3.5A 5% 120W PSSBU120-204 +3.3 VDC 1.5A 15A 5% +5 VDC 0.8A 6A 5% 79.5W *PSSBU120-215 +5 VDC 1.5A 15A 5% -24 VDC 0.2A 2A 5% 120W *PSSBU120-219 +28 VDC 0.4A 3.92A 5% +5 VDC 0A 2A 5% 120W TRIPLE OUTPUT MODELS Output #1 Output #2 Output #3 Model Number Vo(nom) Io(min) Io(max) Reg(max) Vo(nom) Io(min) Io(max) Reg(max) Vo(nom) Io(min) Io(max) Reg(max) Output Power PSSBU120-300 +3.3 VDC 1.5A 15A 5% +12 VDC 0.6A 6A 5% -12 VDC 0A 0.8A 5% 120W PSSBU120-300-1 +3.3 VDC 1.5A 15A 5% +12 VDC 0.6A 6A 5% +12 VDC 0A 0.8A 5% 120W PSSBU120-301 +5 VDC 1.5A 15A 5% +12 VDC 0.8A 6A 5% -5 VDC 0A 0.8A 5% 120W PSSBU120-301-1 +5 VDC 1.5A 15A 5% +12 VDC 0.8A 6A 5% +5 VDC 0A 0.8A 5% 120W PSSBU120-302 +5 VDC 1.5A 15A 5% +12 VDC 0.8A 6A 5% -12 VDC 0A 0.8A 5% 120W PSSBU120-302-1 +5 VDC 1.5A 15A 5% +12 VDC 0.8A 6A 5% +12 VDC 0A 0.8A 5% 120W PSSBU120-303 +5 VDC 1.5A 15A 5% +15 VDC 1.0A 6A 5% -15 VDC 0A 0.8A 5% 120W PSSBU120-303-1 +5 VDC 1.5A 15A 5% +15 VDC 1.0A 6A 5% +15 VDC 0A 0.8A 5% 120W PSSBU120-305 +5 VDC 1.5A 15A 5% +24 VDC 0.4A 3.5A 5% -12 VDC 0A 0.8A 5% 120W PSSBU120-305-1 +5 VDC 1.5A 15A 5% +24 VDC 0.4A 3.5A 5% +12 VDC 0A 0.8A 5% 120W PSSBU120-306 +3.3 VDC 1.5A 15A 5% +12 VDC 0.8A 6A 5% -5 VDC 0A 0.8A 5% 120W PSSBU120-306-1 +3.3 VDC 1.5A 15A 5% +12 VDC 0.8A 6A 5% +5 VDC 0A 0.8A 5% 120W PSSBU120-307 +5 VDC 1.5A 15A 5% +10 VDC 0.6A 6A 5% -10 VDC 0A 1.0A 5% 120W PSSBU120-307-1 +5 VDC 1.5A 15A 5% +10 VDC 0.6A 6A 5% +10 VDC 0A 1.0A 5% 120W NOTES 1. On single output models the output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing different is requested. Please contact factory for ordering details. 2. Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal. 3. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal. DERATING CURVE

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSSBU120 Series Single, Dual, and Triple Outputs AC/DC Switching Power Supply for I.T.E. Rev A MECHANICAL DRAWING Unit: inches (mm) PIN CONNECTIONS PIN MODEL 1 2 3 4 5 6 7 8 9 10 11 12 13 (optional) PSSBU120-1XX-13PIN OUT OUT OUT OUT OUT OUT RTN RTN RTN RTN RTN RTN PFD PSSBU120-219-13PIN N/C N/C Vo1 Vo1 Vo1 Vo1 COM COM COM Vo3 COM COM PFD PSSBU120-215-13PIN N/C N/C Vo1 Vo1 Vo1 Vo1 COM COM COM Vo3 COM COM PFD PSSBU120-2XX-13PIN Vo2 Vo2 Vo1 Vo1 Vo1 Vo1 COM COM COM N/C COM COM PFD PSSBU120-3XX-13PIN Vo2 Vo2 Vo1 Vo1 Vo1 Vo1 COM COM COM Vo3 COM COM PFD Note: Vo1: Output#1 Vo2: Output#2 Vo3: Output#3 NOTES: 1. Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal. 2. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal.