Microsoft Word - PSSBU100.doc
Document overview
- Manufacturer or author: dhoutz
- PDF pages: 4
Technical content
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 05/30/2012 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 DATASHEET Rev. B PSSBU100 SERIES 90~260VAC Input Voltage Range Active Power Factor Correction Up to 100 Watts, Single Outputs AC/DC Open Frame Switching Power Supplies
FEATURES
Class I Active Power Factor Correction 5” x 3” x 1.18” Open Frame Package Single Outputs RoHS Compliant 100% Burn-in Tested Internal EMI Filter Wide Input Voltage Range: 90~260VAC, 47~63Hz Up to 100 Watts Output Power Over Voltage Protection (Crowbar Design) Input Surge Voltage, Over Voltage, and Over Load Protection Meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits UL/cUL (UL 60950-1:2nd Ed), TUV/Bauart (EN60950-1:2nd Ed), and CE Approvals
DESCRIPTION
The PSSBU100 series of Class I AC/DC switching mode power supplies provides up to 100 Wa tts of continuous output power in a compact 5” x 3” x 1.18” open frame package. Th is series has single output models with a wide input voltage range of 90~260VAC. These power supplies have active power fact or correction, an internal EMI filter, and input surge voltage, over load, and over voltage pr otection. All models meet FCC Part-15 Class B and CISPR-22 Class B Emission Limits. This series also has UL/cUL (UL 60950-1:2 nd Edition) and TUV/Bauart (EN60950-1:2 nd Edition) safety approvals and meets new CE requirements. All models are RoHS compliant and have been 100% burn-in tested.
Rev. B PSSBU100 Series Single Outputs, Active PFC Up to 100 Watts, Open Frame AC/DC Switching Power Supplies Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 05/30/2012 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 SPECIFICATIONS: PSSBU100 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range 100 240 Input Voltage Range Operating Input Voltage Range 90 260 VAC Input Frequency 47 63 Hz Low Line Io = Full Load, Vin = 115VAC 1.6 Input Current High Line Io = Full Load, Vin = 230VAC 0.8 A Low Line Io = Full Load, 25°C, Cool Start, Vin = 115VAC 44 50 Inrush Current High Line Io = Full Load, 25°C, Cool Start, Vin = 230VAC 88 100 A Power Factor Correction (PFC) Io = Fu ll Load, Vin = 90~260VAC 0.95 0.97 1.0 OUTPUT SPECIFICATIONS Output Voltage Range See Table Load Regulation Vin = 230VAC 3 5 % Line Regulation Io = Full Load 0.5 1 % Output Power Vin = 90~260VAC 0 100 W Output Current Range See Table < 3.3VDC output models 2 Ripple & Noise (peak to peak) All other outputs Full Load, Vin = 90VAC 0.5 1 % Transient Response Time Io = Full Load to Half Load, Vin = 100VAC 4 ms Hold-Up Time Io = Full Load, Vin = 110VAC 16 ms Start-Up Time Io = Full Load, Vin = 100VAC 2 s Temperature Coefficient -0.04 +0.04 %/°C PROTECTION Over Voltage Protection 112 132 % Over Current Protection 110 150 % Input Surge Current Protection yes GENERAL SPECIFICATIONS Efficiency Io = Full Load, Vin = 230VAC 70 80 85 % Primary to Secondary 4242 Dielectric Withstanding Voltage Primary to Ground 2121 VDC Isolation Resistance Test Voltage = 500VDC 50 M Ω Safety Ground Leakage Current Io = Full Load, Vin = 240VAC 0.5 0.75 mA ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derate linearly from 100% Load at 50°C to 50% load at 70°C 0 50 +70 °C Storage Temperature -40 +85 °C Operating Humidity 0 95 % Storage Humidity 0 95 % MTBF Operating Temperature at 25°C, ca lculated per MIL-HDBK-217F 100,000 hours PHYSICAL SPECIFICATIONS Weight Approximately 12.2oz (345g) Dimensions (L x W x H) 5.00 x 3.00 x 1.18 inches (127.0 x 76.3 x 30.0 mm) SAFETY & EMI EMI Requirements for CISPR-22 Vin = 220VAC B Class EMI Requirements for FCC PART-15 Vin = 110VAC B Class Safety Approvals UL/cUL (UL 60950-1:2 nd Edition), TUV/Bauart (EN60950-1:2nd Edition), CE
Rev. B PSSBU100 Series Single Outputs, Active PFC Up to 100 Watts, Open Frame AC/DC Switching Power Supplies Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 05/30/2012 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Range Output Current Range Total Regulation Maximum Output Power PSSBU100-101 3 ~ 5 VDC 18.00 ~ 10.80 A 5% 54W PSSBU100-102 5 ~ 6 VDC 14.00 ~ 11.66 A 5% 70W PSSBU100-103 6 ~ 9 VDC 13.33 ~ 8.88 A 5% 80W PSSBU100-104 9 ~ 11 VDC 11.11 ~ 9.09 A 5% 100W PSSBU100-105 11 ~ 13 VDC 9.09 ~ 7.69 A 3% 100W PSSBU100-106 13 ~ 16 VDC 7.69 ~ 6.25 A 3% 100W PSSBU100-107 16 ~ 21 VDC 6.25 ~ 4.76 A 3% 100W PSSBU100-108 21 ~ 27 VDC 4.76 ~ 3.70 A 2% 100W PSSBU100-109 27 ~ 33 VDC 3.70 ~ 3.03 A 2% 100W PSSBU100-110 33 ~ 40 VDC 3.03 ~ 2.50 A 2% 100W PSSBU100-111 90 ~ 260VAC 40 ~ 50 VDC 2.50 ~ 2.00 A 2% 100W NOTES 1. For single output models the output voltage is specified as a range (Ex: 40~50VDC); the customer must specify what they would like the output voltage set at. Please contact factory for ordering details. 2. Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal. 3. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal. DERATING CURVE Ambient Temperature (°C) Output Power (%) 0 10 20 30 40 50 60 70 80 120 100
Rev. B PSSBU100 Series Single Outputs, Active PFC Up to 100 Watts, Open Frame AC/DC Switching Power Supplies Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 05/30/2012 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4 MECHANICAL DRAWING 0.80±0.02 (20.3±0.5) 0.85±0.02 (21.6±0.5) Ø0.16 (Ø4.0) MOUNTING HOLES X 4 PITCH = 0.16 (3.96) 0.12 (3.0) DC OUTPUT 30.8±0.5 (1.21±0.02) 0.80±0.02 (20.3±0.5) 0.85±0.02 (21.6±0.5) M3XP0.5 (MOUNTING HOLES) X 2 AC INPUT PITCH = 0.31 (7.92) Unit: inches (mm) LED L N G PIN CONNECTIONS Pin Assignment
1 OUT
2 OUT
3 OUT
4 OUT
5 OUT
6 OUT
7 RTN
8 RTN
9 RTN
10 RTN
11 RTN
12 RTN
13 N/C
- Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal 2. Output Connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal 3. Weight: Approx 12.2oz (345g) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: (603)778-2300 Toll Free: (888)597-9255 E-mail: sales@wallindustries.com Web: www.wallindustries.com Address: 5 Watson Brook Rd. Exeter, NH 03833