PSS100 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS100 Series

100 Watt

FEATURES

  • 1 Year Warranty
  • Low Cost, High Reliability
  • Fixed Switching Frequency
  • Compact Size, Light Weight
  • AC Input Selectable by Switch
  • 100% Full Load Burn-In Tested
  • Cooling by Free Air Convection
  • EN55022, IEC801-2,3,4 and IEC555-2
  • UL1950 and TUV EN60950 Approved
  • Short Circuit and Overload Protected
  • Built-In EMI Filter, Low Ripple and Noise
  • High Efficiency, Low Working Temperature
  • Soft Start Circuit, Limiting AC Surge Current SPECIFICATIONS: PSS100 Series All specifications are based on 25 o C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 85 ~ 132VAC / 180 ~ 264VAC selected by switch (255 ~ 370VDC) Input Frequency 47 to 63Hz AC Current 2.4A @ 115VAC 1.2A @ 230VAC Inrush Current (max) Cold Start 30A @ 115VAC 60A @ 230VAC Leakage Current < 1mA @ 240VAC OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) PSS-100-3 & PSS-100-5: ±2.0%; Other Models: ±1.0% Voltage Adjustment Range See Table Line Regulation See Table Load Regulation See Table Output Current See Table Ripple & Noise (max) (See Note 2) 100mVp-p Setup, Rise Time 200ms, 80ms @ full load Hold Up Time (typical) 20ms @ full load Temperature Coefficient ±0.03%/°C (0 ~ 50°C) PROTECTION Overload Protection 105 ~ 150% rated output power (150 ~ 200% rated output power for S-100-7.5 only) Protection Type: Shutdown output voltage, re-power on to recover. GENERAL SPECIFICATIONS Switching Frequency 25KHz Efficiency See Table Withstand Voltage 1500VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100MΩ/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10°C to +60°C (refer to output load derating curve) Storage Temperature -20°C to +85°C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Cooling Free air convection Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 322,400 hours min. @ 25°C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 620 grams Dimensions 199(L) x 98(W) x 38(H) mm Warranty 1 year SAFETY & EMC Safety Standards Design refer to UL1012 EMI Conduction & Radiation Design refer to FCC Part15 J Conduction Class B

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS100 Series OUTPUT VOLTAGE / CURRENT RATING CHART Model Number Input Voltage Output Voltage Voltage Adjust. Range Output Current Line Regulation Load Regulation Output Power Efficiency PSS-100-3 3VDC 2.85 ~ 3.3V 20A ±0.5% ±0.5% 60W 70% PSS-100-5 5 VDC 4.75 ~ 5.5V 20A ±0.5% ±0.5% 100W 78% PSS-100-10 10VDC 9 ~ 11V 10A ±0.3% ±0.3% 100W 80% PSS-100-27 27VDC 26 ~ 32V 3.7A ±0.2% ±0.2% 99.9W 84% PSS-100-48 85 ~ 132 VAC or 180 ~ 264 VAC 48 VDC 43.2 ~ 52.8V 2A ±0.2% ±0.2% 96W 84% NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF& 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. DERATING CURVE STATIC CHARACTERISTICS (24V)

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS100 Series Unit: mm Terminal Pin No. Assignment Pin No. Assignment

1 AC/L

2 AC/N

4,5 DC OUTPUT (-V) 6,7 DC OUTPUT (+V)