PSS60 WALL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS60 Series

60 Watt

FEATURES

  • 2 Year Warranty
  • Low Cost, High Reliability
  • Fixed Switching Frequency
  • Compact Size, Light Weight
  • 100% Full Load Burn-In Tested
  • Cooling by Free Air Convection
  • Universal AC Input / Full Range
  • Built-In EMI Filter, Low Ripple and Noise
  • High Efficiency, Low Working Temperature
  • Short Circuit, Overload, and Over Voltage Protected SPECIFICATIONS: PSS60 Series All specifications are based on 25 o C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 85 ~ 264VAC or 120 ~ 370VDC Input Frequency 47 to 63Hz AC Current (typical) 2A @ 115VAC 1A @ 230VAC Inrush Current (typical) Cold Start 20A @ 115VAC 40A @ 230VAC Leakage Current < 3.5mA @ 240VAC OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table Voltage Tolerance (See Note 3) PSS-60-5: ±2.0%; Other Models: ±1.0% Voltage Adjustment Range See Table Line Regulation ±0.5% Load Regulation PSS-60-5: ±1.0%; Other Models: ±0.5% Output Current See Table Ripple & Noise (max) (See Note 2) PSS-60-5 & PSS-60-12: 120mVp-p; PSS-60-15 & PSS-60-24: 150mVp-p Setup, Rise Time 300ms, 50ms @ 230VAC 800ms, 50ms @ 115VAC and full load Hold Up Time (typical) 80ms @ 230VAC 12ms @115VAC and full load Temperature Coefficient ±0.03%/°C (0 ~ 50°C) PROTECTION Over Voltage Protection 115% to 135% (See Table) Protection Type: Hiccup mode, recovers automatically after fault condition is removed. Overload Protection 105 ~ 150% rated output power Protection Type: Hiccup mode, recovers automatically after fault condition is removed. GENERAL SPECIFICATIONS Switching Frequency 77KHz Efficiency See Table Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100MΩ/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10°C to +60°C (refer to output load derating curve) Storage Temperature -20°C to +85°C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Cooling Free air convection Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 316,200 hours min. @ 25°C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 510 grams Dimensions 159(L) x 97(W) x 38(H) mm Warranty 2 years SAFETY & EMC Safety Standards UL1012, UL60950-1, TUV EN60950-1 Approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS60 Series OUTPUT VOLTAGE / CURRENT RATING CHART Model Number Input Voltage Output Voltage Voltage Adjust. Range Output Current Output Power Efficiency Over Voltage Protection PSS-60-5 5 VDC 4.75 ~ 5.5V 12A 60W 73% 5.75 ~ 6.75V PSS-60-12 12 VDC 10.8 ~ 13.2V 5A 60W 76% 13.8 ~ 16.2V PSS-60-15 15 VDC 13.5 ~ 16.5V 4A 60W 77% 17.25 ~ 20.25V PSS-60-24 85 ~ 264 VAC (120 ~ 370 VDC) NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF& 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. Line Regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. BLOCK DIAGRAM DERATING CURVE STATIC CHARACTERISTICS (24V) fosc: 77KHz

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSS60 Series Unit: mm Terminal Pin No. Assignment Pin No. Assignment

1 AC/L

2 AC/N

4 DC OUTPUT (-V)

5 DC OUTPUT (+V)